Dial Lamp - Front Panel Indicator Light, Relampable

Dial Lamp - Front Panel Indicator Light, Relampable

Dial Lamp - Front Panel Indicator Light, Relampable image 1
Dial Lamp - Front Panel Indicator Light, Relampable image 2
Dial Lamp - Front Panel Indicator Light, Relampable image 3
Dial Lamp - Front Panel Indicator Light, Relampable image 4
Customer image:<br/>"My latest use of this is on my bicycle. It has turn signal lights and a flasher switch for these lights."
Click to zoom in
Dial Lamp - Front Panel Indicator Light, Relampable image 1Dial Lamp - Front Panel Indicator Light, Relampable image 2Dial Lamp - Front Panel Indicator Light, Relampable image 3Dial Lamp - Front Panel Indicator Light, Relampable image 4
Customer Images:
Customer image: "My latest use of this is on my bicycle. It has turn signal lights and a flasher switch for these lights."
$10.95
In Stock

Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.

  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: ~\frac{9}{16}~ - 27
Available Jewels (sold separately)
Amber P-L117
Aqua P-L125
Blue P-L120
Clear P-L122
Green P-L116
Purple P-L121
Red P-L115
Violet P-L121V
White P-L123
Chassis Hole Diameter0.6875 in.
Item Height1.755 in.
Rating125 V, 75 W
U.S. Thread Major Diameter0.5625
U.S. Thread Pitch27 tpi.
Packaging Information
Packaging Dimensions1.8 in. × 1 in. × 0.8 in.
Weight (Packaging)0.0441 lbs.

My Project Lists

You must be logged in to add items to a project list.

Questions? Contact us at [email protected], or give us a call at 480-820-5411

Product Reviews

5.00 out of 5 based on 14 reviews
Robert B. Vincelette Jr. - October 13th, 2022
5 out of 5

This is a solidly built lamp holder I use for the flasher and turn signals on my bicycle which I have to ride at night. I have since ordering my first lampholders been unable to find 12 Volt colored (specifically green) bulbs to use instead of incandescent bulbs and wish I could find them again.

williamtkach - February 17th, 2020
5 out of 5

well built and the best price you can get.

Robert B Vincelette Jr - January 6th, 2020
5 out of 5

I have been using these panel lights for years, in the power supplies to my stereo amplifiers, and most recently on my bicycle.

cosmicthermos - February 12th, 2019
5 out of 5

Excellent quality. Fine workmanship. Just like the original.

Robert Vincelette - December 23rd, 2018
5 out of 5

These classics are my favorite pilot lights. I use them across fuse holders with a 100K dropping resistor so I can see a red light go on when a fuse blows. I put some in the stove in the kitchen because they hvee more charisma than the stock pilot lamps.

RazRojasB - September 20th, 2018
5 out of 5

Very sturdy! Has a nice expensive, heavy feel to it. Fits perfectly with jewels and 47 bulbs. Great quality!

Kerry Girolamo - September 16th, 2018
5 out of 5

This indicator lamp holder is easy to install and very stable when installed. Priced right as well. The lamp is easily changed.

Robert Vincelette - June 15th, 2018
5 out of 5

This is a first rate construction and easy to install. I used it with neon bulbs and a 200k resistor across a fuse to make a red lamp that would light up if the fuse is blown. One precaution is in order here. Solder flux conducts electricity and shorts out a neon bulb because it has a resistance of just under 100k, something that is not significant for lower voltage bulbs. Also it would be convenient if there were led bulbs that could fit into these sockets.

tsnevillecom - November 11th, 2017
5 out of 5

What LEDs would you recommend for this unit?

MikeD - January 22nd, 2016
5 out of 5

This item does not fit a fender Princeton Chassis and the other metal style touches the chassis, not good