EMI / RFI screen (grounding washer) for S2 and S4 Cliff jack sockets. This lock washer is added to S2/S4 Cliff jacks to provide a chassis/shield connection for the connection. Jacks sold separately.

LT1054 switched-capacitor voltage converter with regulator in an 8 pin DIP package. The LT1054 device is a bipolar, switched-capacitor voltage converter with regulator. It provides higher output current and significantly lower voltage losses than previously available converters. An adaptive-switch drive scheme optimizes efficiency over a wide range of output currents. Total voltage drop at 100-mA output current typically is 1.1 V. This applies to the full supply-voltage range of 3.5 V to 15 V. Quiescent current typically is 2.5 mA. The LT1054 also provides regulation, a feature previously not available in switched-capacitor voltage converters. By adding an external resistive divider, a regulated output can be obtained. This output is regulated against changes in both input voltage and output current. The LT1054 can also shut down by grounding the feedback terminal.

Angled solder terminal on a locking washing for ⅜” bushings. Perfect for adding chassis ground connections on switches, jacks, pots, and any other ⅜” bushing part.

Cliff metal chassis mount XLR connectors. 3 pole, male, with machined connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• Machined connectors
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

Cliff metal chassis mount XLR connectors. 3 pole, female, with stamped connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. For greater reliability, the female connectors have contact pins which provide a large surface area and self-clean upon plug insertion. Mounting hardware not included. Features

• The housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding lug
• Compatible with all other XLR brands

Chassis ground washer for 15/32” hardware such as footswitches, full-size Carling toggles, and Switchcraft toggles. These grounding lug washers have a 0.48” inner diameter and also work with M12 hardware. The ¼” tab can be used with quick disconnects or can be directly soldered to wire.

Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole female, D Flange, machined, black finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Features

• The “D” size housing can be either front or rear mounted using the same panel cutout
• A leading first mate last break socket contact is standard on all female connectors (Pin 1)
• Solder cup
• Connectors are fitted with a grounding system for RFI shielding applications
• Compatible with all other XLR brands

Note: A ground tag is standard on all AC "Z" series connectors.

Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn't change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the "iconic" amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product.

I.C. hand lotion soothes dry, chafed skin caused by glove irritation and chemical contact. ESD-safe. Improves skin contact with wrist strap grounders. Contaminant-free, greaseless. Natural Non-Contaminating Static Dissipative Moisturizing Hand Lotion contains NO Silicones, Lanolin’s, Glycerin or Mineral Oils. Absorbs immediately into your skin and is greaseless. The IC Pre-gloving Moisturizer helps to relieve dermatitis, urticaria, “skin flaking”, chapping and other irritations due to regular use of gloves and will not degrade or weaken latex or Nitrile Gloves. Used in conjunction with wrist straps. Vitamins A, D & E lightly fragranced with all natural herbal steeped tea along with hints of grapefruit and lemon splashes.

• Helps to meet ANSI S20.20
• NSF E4 Certified for Food Handlers
• Static Dissipative and ESD Safe
• Helps Grounding to Wrist Straps
• CHG Compatible