New production, aluminum, 2" tall, for use with P-ST9-700 and P-ST9-700-PC.

Grips tube base with 'teeth' to securely hold tube in place. For use with octal sockets with 1-1/2" mounting centers. Super high quality. Spring plate with Nickel plating. Please Note: This tube clip will not work with socket P-ST8-500

Retainer (Belton). for use with EL84 tubes, mounts to chassis. Steel plate with nickel plating and natural coil spring. Note: these retainers are for specialized socket below chassis mounting. (See mounting drawing below.) The springs are too short for standard sockets mounted level with the chassis surface.

2" tall, for use with P-ST9-AWS. Push/twist to chassis, no mounting centers. Belton manufacture. Aluminum sleeve with natural coil spring. Spring length: 26mm

Heavy plain white boxes with dividers to cushion tube. Minimum order of 10 per size.

Protect your preamp tubes and customize them to suit your style with these colorful aluminum tube shields.

Vacuum tube base clip. Grips tube base with teeth to securely hold tube in place. For use with octal sockets with 1-½" mounting centers.

Extra long (70mm) aluminum tube shield for noval tubes. Ideal for tubes that are longer than a standard preamp tube such as the 6CG7, 12BH7, etc.

• Includes shield base
• Designed for longer than standard pre-amp tubes
• Sold individually
• Compatible with P-ST9-212

Used for vacuum tube octal plug or coil form. 1-¼" dia. x 7/8" high.

The YJShort is shorter than the standard YJS converter, allowing for use in amps that do not have room for the standard converters. It is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps which use 6L6, EL34, 6550 or 6V6 output tubes

8-pin octal base made of brown phenolic. This base is shorter than the P-SP8-479 base and matches bases used on many common octal tubes. The base has a 5/8“ height with approximately 7/16” of internal mounting depth.

The classic Ludwell Sibley book is now available in this wonderful second edition. Tube Lore II contains a wealth of knowledge and information on a wide variety of tube types. Any tube collector or radio aficionado will find the contents of this book to be an invaluable reference.

2" tall, for use with P-ST9-AWS or P-ST9-AWS-CHINA

Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.

Replacement 4-pin tube base for use with tubes such as the 811A or 300B.

The YJS is a specialized, current-limiting/voltage-conditioning adapter for use in most 20 to 100 watt amps that use 6L6, EL34, 6550 or 6V6 output tubes. The YJS is for amps with fixed bias power tubes. (Fixed bias tubes have their cathode connected directly to ground and a negative DC voltage applied to their control grid).

The YJUni is a simple pin-converting adapter for use in most amps with 6V6 or similar based tubes like 6F6, 6G6, 6K6, 6Y6, etc. The YJUni is shorter than standard Yellow Jacket® converters. It is designed for use in lower power output amps (20 watts or less) when no power reduction is desired.

8 pin tube base with gold pins. Outer Diameter: 1.20" Inner Diameter: 1.16" Height (not including pins or keyway): 0.79"

Gerald Weber, of Kendrick amplification fame, is the author of A Desktop Reference of Hip Vintage Guitar Amps and Tube Amp Talk for the Guitarists and tech. This is his third book, and works well as a companion to his previous books or on its own. 528 pages, softbound

Made in China. Aluminum tube shield (with base), spring loaded, for short 9 pin miniature tubes like NOS 6386 with 1.50" seated height. (Too short to fit more common 9 pin miniature tubes like 12AX7 with 1.94" seated height).

8 pin tube base with gold coated pins.
Outer Diameter: 1.57"
Inner Diameter: 1.52"
Height (not including pins or keyway): 0.80"

The JJ Electronic 12AX7 / ECC83 has quickly become a modern classic in preamp tubes. Its rugged design and rich harmonics make this tube an obvious choice for musicians who need a reliable and high quality tube at a reasonable price. The balanced tone of the JJ 12AX7 works well in any amp.

The JJ Electronic EL84 is a solidly built EL84 / 6BQ5 with excellent tonal qualities. JJ’s rugged construction of this tube offers high reliability without any compromise to the sound. This tube has solid lows with warm bright mids and shimmery highs. When saturated the harmonics are rich and dynamic. The JJ EL84 nails the classic sound of this tube. This tube can replace any EL84 or 6BQ5 tube.

A good choice for phase inverters, reverb drivers, and general preamp use. This tube offers low noise, low microphonics, and warm smooth tones at a great price. Like all JJ tubes, it has a rugged construction that doesn’t compromise the sound of your amp. The JJ 12AT7 is a solid replacement for any 12AT7, ECC81, or 6201 tube. It can also be used to replace 12AX7 tubes in position 1 to reduce gain.