Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types. Standard 'classic' resistor. Sold in multiples of 5. 10% tolerance.

• One watt rating
• ± 20% tolerance
• New production
• Carbon composition
• Sold individually

Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types.

High quality metal film resistors from Vishay / BC Components. PR02 resistors are rated for 2W but have a compact 3.9x12mm package. These resistors look great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment. Construction: A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents.

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Sold in multiples of 5. ±5% tolerance. 1 watt

Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Sold in multiples of 5. ½" watt - 350V working, 700V overload, 0.4" long by 0.14" dia.

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Package of 5. These resistors are perfect for pedal builders! 1/4 watt.

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Sold in multiples of 5.

• 1/2 watt
• ± 1% tolerance
• -55° C to 155° C operating range
• 350 V working, 700 V overload
• Epoxy coated
• Nickel chromium ceramic substrate
• Alloy coated leads
• Welded end caps
• EIA color coded
• .40" long x .14" diameter

Wire Wound power resistors are made by wrapping a length of high resistance wire onto an insulating form. Ceramic flame retardant package. Exceptionally small, sturdy and reliable. 5 watt.

Metal Oxide resistors are for applications where stability under high temperature conditions is required. Sold in multiples of 5. 2 watt. ±5% tolerance

Wire Wound power resistors are made by wrapping a length of high resistance wire onto an insulating form. Ceramic flame retardant package. Exceptionally small, sturdy and reliable. 10 watt.

High quality metal film resistors from Vishay / BC Components. PR03 resistors are rated for 3W but have a compact 5.2x19.5mm package. These resistors look great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment. Construction: A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents.