Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. JBA is the most represented in J-Bass style pickup line of WSC. Overwound for more punch, midrange, bass, and output, and delivers '60s Jazz Bass tone. It is constructed with Alnico 5 magnets and Formvar magnet wire for serious thump and growl.

Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.

This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These pickups use alnico 5 pole pieces to produce a warm, well rounded classic tone.

Genuine Gretsch G5400 Blacktop Filter'Tron pickups. Includes silver mounting ring, three pickup mounting screws with springs, and four mounting screws for the ring. These pickups feature a pre-wired connector for solderless connections.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.

Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.

• Magnet Type = Alnico 3 pole pieces
• D.C. Resistance = 5.92k Ohms
• Inductance (henrys) = 3.61
• Wire Type = Formvar AWG 42
• Lead Type = cloth insulated 2 conductor
• Polarity = normal

Same brass saddles used on the WT3 Wilkinson by Gotoh bridge. Also a great upgrade on your stock vintage style bridge. Adjustable pivot for intonation while maintaining a vintage tone. Set of 3 2-string saddle replacements.

Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.

Will fit most USA 3-saddle Telecasters, Vintage Series '52 reissue, Custom Shop and more. Also fits most Mexican Telecasters. Made from the highest quality material. Complete with springs and screws
Features:
Set of three Pure Vintage brass Telecaster bridge saddles
Includes intonation springs, slotted intonation screws and saddle height adjustment screws
Used on early ’50s Telecaster and Esquire® guitars
Fits most vintage-style three-saddle Telecaster bridges; will not fit modern six-saddle Telecaster bridges

Genuine Fender replacement chrome bridge assembly for use with most Standard series Telecaster models manufactured from 2004-present (does not retrofit to a three-screw mounting design without modification). Bridge pickup and mounting hardware not included.

• Chrome bridge assembly
• Six adjustable block saddles
• Four-screw mounting design
• Mounting hardware not included
• For Standard Series Telecaster models (2004-present)

The 7 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

Set of three compensated brass bridge saddles for use on vintage-style three-saddle Telecaster bridges (does not fit standard six-saddle Telecaster bridges).
Set includes saddles, intonation springs, slotted intonation screws and saddle-height adjustment screws.
Features:

• Set of three compensated brass bridge saddles
• For vintage-style three-saddle Telecaster bridge assemblies

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.

• 3.22 in. (82mm) stud spacing

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing

Steel saddles for electric guitar tremolo bridges and hardtail bridges. 2-3/32'' string spread. Set of 6 replacement steel guitar saddles.

For non-tremolo fixed bridge Strat® style guitars that have through-body string mounting. Steel saddle. Saddle intonation can be individually adjusted. Mounting screws included. Hardware included.

Genuine Bigsby® Sorkin bridge assembly for use with Bigsby vibrato units. The Sorkin bridge is also known as the bowtie bridge.
2 13/16” stud spacing.

Genuine Fender American Vintage bass bridge for Jazz bass and Precision bass. Complete assembly with old-style threaded saddles and mounting screws.

Vintage style ABR bridge. Wired. Hardware included The saddles on this ABR bridge are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just as the vintage originals were designed.

• Thumbwheels and threaded rod included
• Made In Korea

The ResoMax 6mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. This is a great option to upgrade or replace the existing bridge on your Epiphone, ESP, LTD, BC Rich, Carvin, Schecter as well as many other import guitars. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.

Brass saddle version of the EV510T series tremolo bridge featuring Gotoh’s patented stud lock system and FST block. Gotoh 510T Series Tremolos are machined with Chrome Molybdenum Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Studs, anchors, claw with screws, springs, arm, and hex keys for adjustments are all included with this tremolo. Gotoh's original FST feature (PAT.) is located between the saddle and ball end. The large channel keeps the strings from touching the plate. This feature improves the tremoloʼs ability to return to the tuned position after using the tremolo arm.