Stop bar, Gibson® tailpiece, chrome

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

Tremolo Stopper - Brass Block, Hex Screw, Allen Key
Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)
$8.55
Tailpiece Studs - Imperial Stop, Steel, .781", set of 2
Colors Available:
U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability This standard stop bar stud is made in steel for added strength and sustain and works with all US threaded bushings. Body Inserts sold separately.
Starting at $5.95
package of 2
Tailpiece - Stop Bar, Vintage Spec, Aluminum, USA
Colors Available:
U.S. made and true to vintage 1950s specifications. This lightweight stop tailpiece is made of aluminum to match the original 1950s version. High quality plating is used on all options. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1141X.
  • 3.22 in. (82mm) stud spacing
Starting at $24.14
Tailpiece Studs - Imperial Stop, Steel, .938", set of 2
Colors Available:
U.S. made quality .938 in. (long) stoptail studs in standard threading. Five step plating process for extra durability. Set of 2. This long stop bar tailpiece stud is made in steel for added strength and sustain. It is intended to be used with longer anchor bushings. Sold separately from inserts.
Starting at $7.67
package of 2
Tailpiece Studs - Stop, Brass, .781 inch, set of 2
Colors Available:
U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability. Set of 2. This standard stop bar tailpiece stud made from brass works with US threaded bushings. Inserts sold separately.
Starting at $7.14
package of 2
Tailpiece - Stop Bar, Vintage Spec, Zinc, USA
Colors Available:
U.S. made and true to vintage specifications. This stop tailpiece is made of zinc to match the Gibson spec used from the 1970s through the present. High quality plating is used on all options. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1131X.
  • 3.22 in. (82mm) stud spacing
Starting at $12.02
Tailpiece Studs - Metric Stop, Steel .781", set of 2
Colors Available:
U.S. made premium .781 in. (short) stoptail studs in metric threading. These steel studs feature a high quality plating for a perfect and durable finish. Set of 2. Bushings sold separately.
Starting at $6.56
package of 2
Potentiometer - Tocos, RV24, Audio, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each audio taper potentiometer includes a nut, flush washer, and lock washer.
  • 24mm diameter, single-turn potentiometers
  • Carbon film element
  • Metal shaft and bushing
  • Panel mount
  • Ear-lug solder terminals
  • 6mm diameter slotted-end solid shaft
  • 10mm bushing length
  • 10mm shaft length (extended past bushing)
  • Audio Taper
$8.30
Trimmer - Piher, Single Turn, Top Adjust, Horizontal PCB Mount, 25kΩ
25kΩ Piher PT-15 15mm carbon trimmer potentiometers. These trimmers are used in a variety of amps and equipment and mount horizontally to the PCB with a slotted top adjustment. Features:
  • Carbon resistive element
  • Dust proof enclosure
  • Polyester substrate
Starting at $0.89
Potentiometer - Tocos, RV24, Linear, 10%, 6mm Shaft
Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.
  • 24mm diameter, single-turn potentiometers
  • Carbon film element
  • Metal shaft and bushing
  • Panel mount
  • Ear-lug solder terminals
  • 6mm diameter slotted-end solid shaft
  • 10mm bushing length
  • 10mm shaft length (extended past bushing)
  • Linear Taper
$8.30
Trimmer - Piher, Single Turn, Side Adjust, Vertical PCB Mount
Piher PT-15 15mm carbon trimmer potentiometers. These trimmers are used in a variety of amps and equipment and most notably in Marshall amplifiers. Features:
  • Carbon resistive element
  • Dust proof enclosure
  • Polyester substrate
$0.89
Potentiometer - Omeg, Linear, 20mm, Panel Mount, 100KΩ
High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes two mounting nuts and one lock washer. Features
  • ⅜ in. Bushing
  • PCB Through Mount
  • Linear Taper
  • Made in UK
  • Life Expectancy of >20,000 cycles (tested at 30 times per minute)
  • Conductive polymer (plastic) track (over twice the life of carbon tracks)
  • Rotation angle: 300° ±5°
  • Tolerance on Rated Resistance: ± 20%
$4.95
Potentiometer - Alpha, Audio, SPST Rotary Switch, 500kΩ
500kΩ 24mm audio taper pot from Alpha with an SPST rotary switch commonly used for ON/OFF settings on volume controls. This pot has a 6.25mm (0.25”) solid shaft and solder lug terminals.
$3.50
Anchor Bushings - USA Thread, Steel
High quality USA made steel anchor bushings available in long or short lengths with a coarse or fine knurl for a variety of stop tailpiece uses. These bushings fit 5/16 – 24 US Threaded studs. Studs sold separately.
Starting at $1.25
package of 2
Tailpiece - Gotoh, GE101Z, Height Adjustable
Colors Available:
This zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.
Starting at $15.95
Potentiometer - Omeg, Audio, 20mm, Panel Mount, 470KΩ
High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes mounting nut and lock washer. Features
  • ⅜ in. Bushing
  • Panel Mount
  • Audio (Log) Taper
  • Made in UK
  • Life Expectancy of >20,000 cycles (tested at 30 times per minute)
  • Conductive polymer (plastic) track (over twice the life of carbon tracks)
  • Rotation angle: 300° ±5°
  • Tolerance on Rated Resistance: ± 20%
$4.95
Potentiometer - Omeg, Linear, 20mm, Panel Mount, 1KΩ
High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. Includes mounting nut and lock washer. Features
  • ⅜ in. Bushing
  • Panel Mount
  • Linear Taper
  • Made in UK
  • Life Expectancy of >20,000 cycles (tested at 30 times per minute)
  • Conductive polymer (plastic) track (over twice the life of carbon tracks)
  • Rotation angle: 300° ±5°
  • Tolerance on Rated Resistance: ± 20%
$4.95
Adapter Kit - Vibramate, Standard Carved Top Les Paul
Colors Available:
Vibramate V7-LP Les Paul Adapter Mounting Kit, For Bigsby B7 - Now you can install a Bigsby Vibrato on your carved top Les Paul® guitar without drilling any holes!
Starting at $52.95
Tailpiece Set - Lightweight Aluminum, Steel Studs
Colors Available:
U.S. made premium stop bar tailpiece made from a light weight aluminum. These tailpieces feature a high quality plating for an unmatched finish. True vintage specs and dimensions. Steel studs are included. Anchor bushings sold separately.
Starting at $30.09
Potentiometer - Omeg, Reverse Audio, 20mm, Panel Mount, 350KΩ
High quality panel mount potentiometers from Omeg. These made-in-UK pots match the vintage Radiohm pots found in many vintage fuzz effects such as the Fuzz Face and Tonebender pedals and are a favorite for vintage style builds. They feature a high quality conductive polymer track that offers improved stability and extended life. The 350K resistance with an reverse audio (antilog) taper is perfect for germanium Fuzzrite builds. Includes mounting nut and lock washer. Features
  • ⅜ in. Bushing
  • Panel Mount
  • Reverse Audio (Antilog) Taper
  • Made in UK
  • Life Expectancy of >20,000 cycles (tested at 30 times per minute)
  • Conductive polymer (plastic) track (over twice the life of carbon tracks)
  • Rotation angle: 300° ±5°
  • Tolerance on Rated Resistance: ± 20%
$14.95
Vibrato - Bigsby Vibramate Set, B7 / V7-335 for Arch Top
Color / Spacings Available:
This is a complete set that includes an original Bigsby B7 and a matching Vibramate V7-335 for use with most standard 335 sized arch top guitars with stop tailpiece and tune-o-matic bridge.
$269.94
Vibrato - Bigsby Vibramate Set, B7 / V7 Les Paul
Colors Available:
This is a complete set that includes an original Bigsby B7 and a matching Vibramate V7-LP for use with most standard carved top Les Paul® guitars with a stop tailpiece and tune-o-matic bridge.
Starting at $252.94
Adapter Kit - Vibramate, V7-335 for Gibson and Epiphone Arch Top
Vibramate V7-335 installs in minutes with no drilling! For arch top guitars with stop tailpiece and Tune-A-Matic bridge. The E-series is for 8.0" guitars. The G-Series is for 8.5" guitars.
$69.95
Pickup - Kent Armstrong, Icon Vintage 57 (Alnico 2), Bridge
Kent is one of the foremost pickup designers in the industry, and years of listening to what the customer wanted to hear has culminated in the esteemed Kent Armstrong pickups. With his pickups, Kent has one goal in mind: to give every player their dream sound. Faithfully recreated from the famous 1957 Patent Applied For design humbucking pickup with the same plain enamel 42 AWG wire and Alnico 2 magnets for the warmth and singing tone the originals are known for. Proper 49.2mm pole piece spacing, braided wire with no tap and maple spacers. For the first time you can get a true calibrated set for neck and bridge position but the options don't stop there.
$57.95