Lead/rhythm guitar 12" American speakers. Nice warm, fat tone with a little top end bite and clarity.

Thin wall heat shrink tubing available in multiple diameters. The flexible yet durable polyolefin material and standard 2:1 shrink ratio make this heat shrink a great option for electrical insulation, cable bundling, and component protection.

• Operating Temperature: -55°C to +135°C
• Minimum Shrink Temperature: 70°C
• Full Recovery Temperature: 100°C
• UL Approval
• RoHS Compliant

Temporary Heat Sink. Absorb & dissipate heat during soldering/desoldering sensitive parts. Made in Taiwan.

2 to 1 heat shrink tubing variety pack. This pack includes six different diameters with four pieces of each size. Each piece is six inches in length. Features:

• Resistant to common fluids and solvents
• UL and CSA listed
• UV resistant
• Meets DEF. STAN 59.97
• Meets UL 224, 125°C and CSA C22.2 No. 198.1
• Meets MIL-DTL-23053/5 Class 2 & 3
• Flame retardant (Does not include transparent)
• Seals and protects cable splices and terminations.
• Thin wall tubing

2 to 1 heat shrink tubing variety pack with multiple colors in each size. This pack includes six different diameters ranging from 1/16” to 3/8”. Each piece is 4” in length. This set comes in a hard plastic case perfect for sorting and storing heat shrink. Features:

• Resistant to common fluids and solvents
• UL and CSA listed
• UV resistant
• Meets DEF. STAN 59.97
• Meets UL 224, 125°C and CSA C22.2 No. 198.1
• Meets MIL-DTL-23053/5 Class 2 & 3
• Flame retardant (Does not include transparent)
• Seals and protects cable splices and terminations.
• Thin wall tubing

Included Sizes (Diameter):

• 60 pieces - 1/16 in.
• 35 pieces - 3/32 in.
• 25 pieces - 1/8 in.
• 20 pieces - 3/16 in.
• 10 pieces - 1/4 in.
• 10 pieces - 3/8 in.

Type Z9, 1 fluid ounce. Silicone base, extra high-efficiency heat transfer. Made in USA. For mounting transistors, diodes, rectifiers, and resistors. Thermal joint compound for any device where efficient cooling is desired.

• For effective transfer of heat between components & heat sinks
• Will not dry or harden
• White paste

Grease-like consistency; opaque white in color; zero bleed; very stable at elevated temperatures; excellent thermal resistance and high thermal conductivity; efficient thermal coupler; effective and positive heat sink sealers and heat transfer agent. The product offers high thermal conductivity, virtually no bleed or evaporation over a wide operating temperature range. It will not harden, dry out or melt after 1,000 hours at 200°C. Meets Mil-C-47009 and Mil-C-47113.

2 to 1 heat shrink tubing variety pack. This pack includes six different diameters ranging from 1/16” to 1/2”. Each piece is 2.5” in length. This set comes in a hard plastic case perfect for sorting and storing heat shrink. Features:

• Resistant to common fluids and solvents
• UL and CSA listed
• UV resistant
• Meets DEF. STAN 59.97
• Meets UL 224, 125°C and CSA C22.2 No. 198.1
• Meets MIL-DTL-23053/5 Class 2 & 3
• Flame retardant (Does not include transparent)
• Seals and protects cable splices and terminations.
• Thin wall tubing

The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 27.

Black extruded heatsink with radial fins for use with TO-220 and TO-202 transistor packages.

The shrink ratio on this tubing is 2 to 1, it is fungus resistant and non-corrosive. It is recommended for tightly sealing connectors, terminals, wire splices, and tool handles. It may be shrunk with heat guns, oven, etc. Comes in 6 inch lengths, quantity of 23.

Very flexible, high flame retardant polyolefin heat shrink tubing. Unheated outer diameter of about 7.6 mm with a 2:1 shrink ratio. Resistant to common liquid solvents with excellent physical, chemical, and electrical performance.

AC132K PNP germanium transistors. The AC132K is a popular PNP for fuzz pedals and other effects. This transistor is in a thick rectangular heat-sink package with long leads commonly found on germanium transistors.

Multi-function mini heat gun with two speed/temperature settings. This small handheld heat gun is fast and easy to use with its lightweight build and comfortable grip. The nozzle is equipped with a safety shield and the built-in stand makes safely resting it on a table top simple when in use. Ideal for:

• Heat Shrink Tubing
• Embossing
• Drying Paint
• Drying Glue
• Drying Ink

Features:

• 350 Watt
• cULus approved compliance for both US & Canadian markets
• Ideal for heat shrink tubing
• 2 speed/temperature settings featuring quiet operation
• 482°F (Low) / 662°F (High)
• Fast and easy to use
• Comfortable and lightweight
• Safety shield on nozzle
• Built-in bracket for self-support and table top use
• Double insulated power cord

Tan/Brown, wheat, Fender style grill cloth. Due to the constraints of mechanical reproduction, colors are not completely accurate.

Tubular metalized polyester film construction

• ±10% tolerance
• Axial leads
• Non-Inductive, Self Healing

Please Note: Color of capacitor may vary from one production run to another.

IC component sockets for dual in-line package chips (DIP, PDIP, DIL, DIPP.) These sockets feature ladder style cases with tinned stamped and formed connections.

Mallory axial capacitors rated for 400V. The available values are smaller in size than the 630V versions for builds where less space is available. These are also a great choice for use as guitar tone capacitors over the larger 630V versions. The Type 150 series axial lead metallized polyester non inductive capacitors are available in bulk or on tape and reel for automatic insertion. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each audio taper potentiometer includes a nut, flush washer, and lock washer.

• 24mm diameter, single-turn potentiometers
• Carbon film element
• Metal shaft and bushing
• Panel mount
• Ear-lug solder terminals
• 6mm diameter slotted-end solid shaft
• 10mm bushing length
• 10mm shaft length (extended past bushing)
• Audio Taper

11 AWG White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG available with part number S-M436W. This is a coated fiberglass sleeving made by applying a proprietary blend of acrylic polymers to a closely woven electrical grade fiberglass substrate. This sleeving has excellent electrical, chemical and oil resistance properties, excellent heat stability and flexibility for ease of push-up and recovery. It exhibits excellent resistance to oils, acids and alkalis and solvents.

Tokyo Cosmos aka TOCOS is known worldwide for their high quality potentiometers. The RV24 Series is a 24mm military-style carbon element potentiometer with a tolerance of 10%. The RV24 Series has been praised by both guitar and hifi amp builders for their performance and reliability. If you are looking for a top quality pot with a great feel, look no further than Tocos. Each linear taper potentiometer includes a nut, flush washer, and lock washer.

• 24mm diameter, single-turn potentiometers
• Carbon film element
• Metal shaft and bushing
• Panel mount
• Ear-lug solder terminals
• 6mm diameter slotted-end solid shaft
• 10mm bushing length
• 10mm shaft length (extended past bushing)
• Linear Taper

Brush-on adhesive ideal for applying tolex. Cleans up with soap and water. No nasty solvents required. Does not stretch or shrink the vinyl. Comes in quarts or gallons. Specifications: Tolex Glue is a non-flammable, Neoprene based, water borne adhesive formulated to bond tolex and vinyl to wood and wood based substrates. Min. use temp: 45°F Freezes at 32°F and lower Shelf Life: 6 Months Directions: Surfaces to be bonded must be clean. Apply a very thin coat to both surfaces. Very porous surfaces may require more than one coat. Second coat should not be applied until first has dried. Allow to 'flash off' for 20-30 minutes. Cloudy areas indicate incomplete drying. This time can be shortened with forced air and/or heat. Position pieces carefully prior to bringing surfaces together as bond is made instantly.

Audio, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.

0.68uF Mallory axial capacitors rated for 100V. This value is popular for cathode bypass capacitors in many vintage Marshall amps. The 8.5x20.5mm size works well for turret board builds of these classic amplifiers. The Type 150 series are axial lead metallized polyester non inductive capacitors. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

The Svetlana 12AX7 is a premium 12AX7 tube from Russia. Known for their smooth drive and clarity, these tubes are praised by both guitar players and HiFi users alike. The Svetlana 12AX7 is compatible in any 12AX7 or ECC83 position. “Svetlana tubes are quite simply the absolute best. We design and manufacture our tubes, engineered for demanding high fidelity, reliability and overall warmth. Be sure to insist on genuine Svetlana vacuum tubes the next time you retube -- you'll be getting the absolute best possible tubes for any demanding application.” -Svetlana