The 1N914 is a small signal diode similar to the 1N4148 and is common in many older electronics. The 1N914 is general purpose and can be used in a multitude of different applications.

A semiconductor device which passes current in the forward direction(from anode to cathode), and blocks current in the opposite direction. For extreme fast switches.

The BAT41 is a schottky diode used in many DIY projects. General purpose metal to silicon diode featuring very low turn-on voltage and fast switching. This device has integrated protection against excessive voltage such as electrostatic discharges.

MOSFET BS170 N-Channel Transistor. Used in MOD® Kits.
Note - this is a fragile component! Use caution not to overheat or break leads.

Small 42TM018 audio transformers with a 10KΩ:600Ω impedance. This transformer is a popular choice for pickup simulators in various effects such as fuzz pedals. The leads are soft metal wire and can be adjusted to fit a variety of applications. RoHS compliant. Rated for 200mW.

2N7000 N-channel enhancement mode field effect transistors. 2N7000 MOSFETs are used in many DIY projects such as boost and distortion effects pedals.
Features:

• Voltage Controlled Small Signal Switch
• High Saturation Current Capability
• Rugged and Reliable
• High Density Cell Design for Low RDS(ON)
  

A semiconductor device which passes current in the forward direction(from anode to cathode), and blocks current in the opposite direction. Features

• Silicon epitaxial planar diodes
• Low power loss, high efficiency
• Low leakage
• Low forward voltage
• High speed switching
• High current capability
• High reliability

Used in a variety of Fender amps. Replacement for Fender part number 0006260049

Small 42TM022 audio transformers with a 1.5KΩ:600Ω impedance. This transformer is a popular choice for octavia style builds as well as ring modulators. The leads are soft metal wire and can be adjusted to fit a variety of applications. RoHS compliant. Rated for 200mW.

SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.

The FatKeys™ SSI2164 is perhaps the most flexible VCA available, with four independent channels for lowest cost-per-VCA. The user-selectable mode control allows Class A, AB, or intermediate biasing, and current inputs and outputs provide great design freedom. Ideal for voltage-controlled filters. The SSI2164 is a versatile VCA building block for high-performance audio applications. Four independent channels provide voltage control of current-mode inputs and outputs for a gain range from +20dB to –100dB, with control provided by a ground-referenced –33mV/dB constant. The SSI2164 will directly retrofit existing SSM/V2164 positions while offering improvements that include significantly lower overall distortion, on-chip protection against asymmetrical power failure, and a substantial increase of input current handling. The device offers considerable flexibility for a wide range of design goals and applications.

Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

The BlueMolded line of polyester film capacitors are retrofits for Astron or Blue Molded caps used in vintage tweed, brown, and blackface Fenders®. These capacitors amazingly capture vintage Fender® tones of the Blackface era, and the famous 1959 tweed 5F6-A Bassman era which is so musical and good, Marshall™ modeled their amps after them! After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers.

The TL072 is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.

Made of the highest quality aluminum metalized polypropylene film available. Made in France. This superior concept significantly improved the electrical and mechanical characteristics of the film capacitor. They deliver a high level of performance that has never before been achieved.

The BC183 is a general purpose NPN transistor in a TO-92 case. The BC183 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC183 is available in three different gain ranges: BC183A, BC183B, and BC183C. Type hfe (IC=2mA, VCE=5V, f=1KHz) BC183A 125-260 BC183B 240-500 BC183C 450-900

The BC184 is a general purpose NPN transistor in a TO-92 case. The BC184 is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. BC184 was used in various Colorsound pedals - Jumbo Tone Bender, Supa Tone Bender, Power Boost, etc. It was also used in the Schaller Fuzz, and has been used in fuzz pedals from well-known builders such as Skreddy Pedals, D*A*M, and Stu Castledine.

DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.

Made of the highest quality aluminum metalized polypropylene film available. Made in France. This superior concept significantly improved the electrical and mechanical characteristics of the film capacitor. They deliver a high level of performance that has never before been achieved.

The BC183L is a general purpose NPN transistor in a TO-92 case. The BC183L is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. The BC183L was used in some of the earliest silicon Fuzz Face pedals. The ECB pinout matches the arrangement on the P-PC-FUZZ-ISS2-BRN Iss. 2 PCB

• NPN polarity
• Collector emitter breakdown voltage 30V
• Collector base breakdown voltage 45V
• Collector current 100mA
• Power 1W
• Transition frequency 120MHz
• TO-92 case

Pure Tone has developed a high quality 1/4" three pole (stereo) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs for both the tip connection, a spring for the ring, and an additional spring for the shield connection. These help to secure the plug into place and create a greater surface area connection at contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Dual Operational Amplifier. The NJM4558 (JRC4558) integrated circuit is a dual high-gain operational amplifier internally compensated and constructed on a single silicon chip using an advanced epitaxial process. Combining the features of the NJM741 with the close parameter matching and tracking of a dual device on a monolithic chip results in unique performance characteristics. Excellent channel separation allows the use of the dual device in single NJM741 operational amplifier applications providing density. It is especially well suited for applications in differential-in, differential-out as well as in potentiometric amplifiers and where gain and phase matched channels are mandatory. Features:

• Operating Voltage (±4V~±18V)
• High Voltage Gain (100dB typ.)
• High Input Resistance (5MΩ typ.)
• Bipolar Technology

Surface mount MMBFJ201 JFETs presoldered to TO-92 adapter boards. Use wire, clipped component leads, or pin headers to easily attach these adapters to PCBs using TO-92 footprints for J201s. These JFETs can be found in many effects pedals, synthesizers, and other projects. The J201 / MMBFJ201 is an N-Channel general purpose amplifier JFET. This device is designed primarily for low level audio and general purpose applications with high impedance signal sources. The pinout is marked on the PCB and is DSG when facing the component side.

Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.

The FatKeys™ SSI2130 Voltage Controlled Oscillator provides beautiful triangle, sawtooth, pulse, and square waveforms with unprecedented temperature stability; and adds an on-chip mixer, low distortion sine wave generator, through-zero FM/PM capability and more in an ultra-compact PCB footprint.