Wire - #26 Celanese covered magnet

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

Wire - 24 AWG, Celanese covered, cotton wrap
White celanese covered wire, resembling early cotton covered wire, may be color dyed. Cotton wrap, #24 magnet wire.
$0.30
Sold by the foot
Wire - Gavitt, Cloth, 22AWG Stranded, Top Coat Pre-Tinned
Colors Available:
High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.
$0.89
Sold by the foot
Wire - Gavitt, Cloth w/ braided shield, 22AWG stranded, Top Coat Pre-Tinned
High quality USA made Gavitt wire. This wire features an external braided shield covering a waxed black cotton cloth braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning on the inner wire is required for use. Sold by the foot.
$0.75
Sold by the foot
Wire - Gavitt, Cloth, 18AWG Stranded, Top Coat Pre-Tinned
Colors Available:
High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 18AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.
$0.95
Sold by the foot
Wire Sleeving - Spaghetti, Old-Style, 20 AWG
Colors Available:
20 AWG fiberglass sleeving is varnished and closely resembles early style spaghetti. 11 AWG also available as part number S-M401W. Minimum order is 10 feet. This product has a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin.
Starting at $0.50
Sold by the foot
Wire - Coax, 24AWG, Spiral Shield, 0.138” outer diameter
High quality spiral shielded wire with a small outer diameter of 0.138 inches. Both the core wire and spiral shield are tinned copper so soldering is easy. The gray outside jacket and blue core insulation have a similar appearance to the type of wire used in vintage pedals such as the Supa Fuzz, Tone Bender, and Zonk Machine. The core wire is 7 strand 24AWG.
$1.05
Sold by the foot
Wire - Coax, 26AWG, Braid ~\frac{7}{34}~ Stranding
RG-174 military grade. Outer diameter = .105". Sold per foot.
$1.39
Sold by the foot
Heat Shrink - 2:1, Thin Wall Tubing, Polyolefin, Black
Thin wall heat shrink tubing available in multiple diameters. The flexible yet durable polyolefin material and standard 2:1 shrink ratio make this heat shrink a great option for electrical insulation, cable bundling, and component protection.
  • Operating Temperature: -55°C to +135°C
  • Minimum Shrink Temperature: 70°C
  • Full Recovery Temperature: 100°C
  • UL Approval
  • RoHS Compliant
Starting at $0.35
Sold by the foot
Cable Clamp - Black Nylon, .203” Mounting Hole
Black nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables. See P-HCABLECLAMP-X for white nylon versions of these clamps.
$0.39
Wire - 4 Conductor, Shielded, 28 AWG
Shielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.
  • Sold per foot
  • 28 AWG
  • Foil shield
  • 12”/3.2mm outer diameter
  • Sold individually
$1.25
Sold by the foot
Cable Clamp - Nylon, .203” Mounting Hole
Nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables.
$0.33