Amplifier Parts

Screw - #6 x 5/16”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #6 screws have a length of 5/16” and are commonly used to secure 9-pin sockets and other hardware to the chassis of blackface and silverface amps. These are also used in some tweed amps for securing the fiberboard and other hardware to the chassis. For the larger #8 blunt tip machine screws found in vintage Fender® amps, see S-HBS8-38.
$1.29
package of 5
Foot - Fender, vintage Sphinx Glides
Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part number: 099-3900-000
$8.95
package of 4
Foot - Rubber, 1.5" x .75", with Steel Washer
High quality large rubber feet with steel washer inserts. These feet are made of a durable textured rubber. The diameter is 1.5” and the height is .75”.
$4.40
package of 4
Dial Lamp - Front Panel Indicator Light, Relampable
Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
$10.95
Handle - Fender Style, Strap, 6.5” Spacing
Colors Available:
High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".
$10.65
Caster - Marshall, 2", with socket, for cabinets
Original Marshall caster and socket with a black wheel having 50mm diameter x 20mm width. Used on 1960A, 1960B and other cabinets. Package of one includes four mounting screws. Caster screws into black plastic socket base.
$17.95
Out of Stock
Contact Pin - Nickel Plated Brass, Seamless, 0.566" Height
0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
$0.15
Turret Board - 2mm, Loaded with 60 Turrets, 300mm x 60mm
300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!
  • Accepts 2mm turrets.
$13.40
Finishing Washer - Nickel-plated Brass, Countersunk, Flush, Fender Style
Flush finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flush finishing washers found on earlier blackface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the later flanged style finishing washers used on these amps, see S-HXFW-2N.
Starting at $2.95
package of 10
Terminal Pin - PCB Mount, 0.05” Diameter, 0.25” Length
PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.
$0.79
Fuse Holder - 3AG-Type, Tweed Style, Solder Lug
Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
$4.70
Screw - 4-40, Phillips, Round Head, Machine, Brass
4-40 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 4-40 size works in place of original M3 screws that were used for the AC inlet, noval sockets, PCB and turret board standoffs, and the P-H1700 and S-HM100-A rotary selectors. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. Use with S-ASP4-X spacers for board standoffs. S-HBWX flat washers are also available.
Starting at $1.59
package of 5
Foot - Rubber, 1" x .56", with Steel Washer
High quality small rubber feet with steel washer inserts. These feet are made of a durable rubber. The diameter is 1” and the height is .56”.
$4.70
package of 4
Foot - Synthetic Rubber, 0.51" Height x 1.60" Diameter
Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.
$0.80
package of 4
Fuse Holder - for Marshall, ¼" Fuses
Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:
  • Rated current: 10A
  • Rated voltage: 250V AC
  • Contact resistance: 2MΩ @ 250V DC or less
  • Dialectric withstand: 1 minute @ 1500V AC
  • Insulation resistance: 100MΩ or more @ 500V DC
$5.99
Receptacle - AC with Fuse Holder, mates with S-W123 & S-W124
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
$1.85
Logo - Marshall, white script, replacement for amplifiers
Original white Marshall™ logo for use on Marshall amplifiers.
Starting at $25.95
Out of Stock
Handle - black strap, Diamond Pattern
Vox style black plastic handle with diamond pattern and brackets. Center to center measurement is 6 1/4".
See S-H105 for compatible screws and T-nuts.
$3.55
Caster - Small Swivel, 2", 4 Screw Mount
Small swivel caster with a black wheel having 50mm diameter x 21mm width. Four ¼" diameter mounting holes. Mounting hardware not included.
$5.15
Finishing Washer - #6, 18-8 Stainless Steel, Countersunk
#6 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
$1.25
package of 10
Indicator Light - Bakelite, Soviet, Incandescent, 9V
Colors Available:
New-old-stock Soviet pilot lights that operate on 9V. These lights have a unique bakelite frame and metal bezel. The lights come with a 9V bulb but can be used with any voltage bulb that fits this type of socket. The diameter of the light is 12mm and the diameter of the mounting hole is 8.1mm. Includes a wavy washer and knurled nut. Note: There can be small differences in the appearance and tint of the lens and color of the bakelite. A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel. The small bulbs can come loose during shipping and reseating the bulb is recommended before use.
$5.95
Receptacle - IEC C14, Panel Mount, Fuse Holder, 10A, 250VAC
Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections can be soldered into place or used with quick disconnects. This receptacle features a built-in fuse holder for 5mm x 20mm fuses. See Specifications, Files, and Documents for a datasheet with dimensions and panel cut out sizing.
$4.89
Indicator Light - Plexi Style, Dome, Neon, 120V
Colors Available:
Plexi style pilot lights that operate on 120VAC. These lights match the style used on many vintage Marshall amplifiers. The lights use a neon bulb with an internal current limiting resistor so no external circuitry is required for use. The mounting diameter hole is 0.380” (9.65mm). Includes an internal tooth lock washer and hex nut.
$9.95
Corner - Black Plastic, 4-Hole, Heavy Duty, Chevron
Heavy duty plastic, stacking chevron corner. Ideal for carpet covered cabinets. See S-H102 for mounting hardware.
Starting at $1.15