Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 44 lbs.

2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.

Protect your expensive investment or hobby with inexpensive fuses. Fits fuse block S-H259 and fuse holder S-H201. Rated at 250V. Measures 1.25" in length, 0.25" in diameter.

Vintage strap. Large, black with black caps.

Power Cord - (3 conductor) Bare End 8', 16 AWG

For connecting a detachable power cord to your amp.

This is a high quality Fender® Style fuse holder replacement for guitar amplifiers. This fits in a ½" chassis hole.

Locking terminal lugs, #6 5/8" length, angled. Package of 10

16/3 SJT, 5/16" cord diameter.

Metal guard for P-HFAN.

Hex nut for Fender® pots. Package of 12.

Screw for chassis straps. Works with #8 Nuts and Lock Washers: S-HHN832 (Nuts) S-HLW8 (Lock Washers) Package of 4

Use where total material thickness is ½" or more. Works on carpet or vinyl, 18 gauge steel, ½" radius. Radius is.50" from the center hole to furthermost edge. Sold individually.

Heavy duty plastic, large stacking chevron corner. Ideal for carpet covered cabinets. Approximately 3-1/4" high, sides are 2" wide, ½" radius. Sold individually.

Zinc t-nut, 10/32 diameter

Two conductor, nylon, .12" x .22" wire (SPT-1).

Extension cord designed for use in the entertainment industry. Power Block ® 3 outlet connector: All black. Very flexible and durable. 12' proCo e-cord. 14 awg

Protect electrical wires and cables from sharp edges in holes drilled through chassis boxes. Groove is 1/16" wide on all grommets listed.

#2 x 3/8", zinc, oval head, phillips, sms screws.

#8-32 x 3 ¼" chassis strap screw. Single piece.

Phillips pan head machine screw, 1 x 30.

Phillips panhead machine screw, 4/40 x 3/8" zinc

Phillips panhead machine screw, 6/32 x ½" zinc

Phillips panhead machine screw, 8/32 x ½" zinc

Phillips panhead machine screw, 6/32 x 3/8" zinc

Phillips panhead machine screw 10/32, ½" zinc, package of 5.

Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes)

2 amps, slo-blo, 5mm x 20mm.

Protect your expensive investment or hobby with inexpensive fuses. Fits fuse block S-H259 and fuse holder S-H201. Rated at 250V. Measures 1.25" in length, 0.25" in diameter.

Cap for fuse holder - Peavey®.

Long life general replacement lamps for dials, indicators, etc. The #47 bulb is the most common replacement light used today. Used on the vast majority of Fender amps and many others as well. 6.3 Volts, 0.15 Amps. Bayonet Base. Bulb: T-3 1/4. 5/8" Chassis Hole

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. In multiple colors, you can customize as you see fit. Threading: 9/16 - 24

40 piece kit of indicator lamp jewels. Contains five of each color: Red Purple Green Violet Amber Clear Blue White

11" White Script

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. In multiple colors, you can customize as you see fit. Threading: 9/16 - 24

Replacement handle for tweed style Fender® amps (6.5" from mounting center to mounter center)

1 ½" diameter x ¾" high with metal washer. Sold individually.

6" Gold Script

Vintage Ampeg style amp handle, center to center measurement is 7 3/8".

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. In multiple colors, you can customize as you see fit. Threading: 9/16 - 24

Spring-loaded metal handle snaps back into recessed dish when not in use, mounting screws included. Dimensions: 6.13" W x 4" H x 0.56" D.

Front corner set, ¾" radius

7/8" diameter x 17/32" high with metal washer. Sold individually.

6" White Script

Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part: 099-3900-000

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A). Center to center measurement is 6-1/2".

If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing! BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin Comes with mounting hardware

Suitcase Type Latch Top. The top is flat with two holes completely hidden. Mates with P-H300.

Ampeg-style strap handle. Black. Center to center measurement is 6". Can be used on other amplifiers.

Thumb screws. Package of two.

Replacement handle for vintage ampeg amps. Will work on other amplifiers as well. Center to center measurement is 6".

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Center to center measurement is 8-1/4".

Vintage Ampeg style amp handle, center to center measurement is 7 3/8".

Gold, large, for AC30

Mounting bracket for speaker grills.

Clear Amp Jewel. Replacement Jewel for Most Fender, Gibson, Peavey & Mesa Amps. Threading: 9/16 - 24

Capacitor cover for Fender® Twin Reverb. Mounting centers are 7" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".

Original Marshall™ Sprung feet. Sold in packages of 2 Screws are included

Vintage Ampeg style amp handle, center to center measurement is 7 3/8".

Strap, black with chrome caps. Center to center mounting is 7" - 7 ¾".

Replacement latch for Ampeg Flip Top. For use with P-H300-TOP

Gold cap for vintage handle. Sold individually.

Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately.

2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.

Heavy duty swivel castor for use on Fender and other amps. 2" diameter wheel supports 44 lbs. Can be purchased with or without metal socket.

Capacitor cover for Fender ® Reissue Vibroverb. Mounting centers are 5.75" x 3". Measurements are 5 ¾" x 3" x 1 ¼"

3" long. Contains two straps and mounting hardware. Original Fender packaging.

Ampeg Metal Logo. Original Ampeg replacement part.

Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately.

Castor/wheel with 4 screw mount.

Bushings. Package of two.

Metal grills have flat black finish with rubber edge trim. Mounting brackets P-HSGA1 are sold separately.

2-leg, ½" radius.

5/8" diameter x ½" high with metal insert.

Mounting centers adjustable from 6.65" to 7.50".

Mounting centers adjustable from 8" to 8.75".

Clip bars. Package of two.

Anti-skid tray.

1960 Vintage Plate

JCM 900 Lead Plate

Vintage style using only the finest tolex available. Height: 16" Width: 20.5" Depth: 9"

Basic front panel for Deluxe Reverb. Material is.032" aluminum.

12" grill kit (includes hardware)

Back metal panel used on JCM800, 27" x 7.125".

Castor cups.

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10. Replacement for Fender ®.

Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.

Gold lead plate for 1960 classic.

Recessed black metal handle. Measures 11" in length, 6.38" in width and 2.63" in depth.

1/4" tall x ½" outside diameter. Interior through hole diameter is 1/8". A counter sunk hole for the screw or nail (not included) is ¼" diameter x 3/16" deep

Vintage style using only the finest tolex available. Height: 14" Width: 17" Depth: 7.5"

Vintage style using only the finest tolex available. Height: 21" Width: 27" Depth: 12"

For '65 Deluxe Reverb, black. Dimensions: Height: 17" Width: 24 ½" Depth: 7 ½" top, 9 ¼" bottom

For 1993 Super, 2001 Super Reverb (fits all). Fits the 2001 reissues and the original 60s amps. It might not fit on all the 70s versions. Dimensions: Height: 24" Width: 25" Depth: 9" top, 10 ½" bottom

Recessed handles eliminate the damage of outside-protrusion-type handles, mounting screws included. Dimensions: 6.75" W x 8.19" H, 2.3" depth.

Recessed spring-loaded handle safely snaps back when not in use, packaged with six t-nuts and bolts. Dimensions: 7" W x 5" H, 0.875" in depth.

Mounting centers are 8.38" to 9.0".

Metal side handle for new hardwired cabinets.

Black metal, 2 hole with lip, radius ½". Sold individually.

Retro fit for Fender Dogbone handle. Replacement for Fender: 099-0946-000. Brown molded dogbone style. 6" center to center.

Retro fit for Fender Dogbone handle. Replacement for Fender: 099-0943-000. Black molded dogbone style. 6" center to center.

Rubber foot measuring 1 ½" diameter X 1" height with metal washer.

2 screw metal glide - mounting centers are 1.5".

Metal flight case handle, measures 7" wide x 5" in height.

Plastic, small chevron stacking corners, 4 mm countersunk holes. Approximately 2-2/5" high, sides are 2" wide, ½" radius. Sold individually.

High Quality Handmade Amp Cover for Full Size Amplifier Head. Cool Urban Camo Design. Dimensions: 11"H x 30"W x 9"D. Made In USA

2" ball swivel, sold individually.

High Quality Handmade Cover for Slant 4x12 Cab. Cool Urban Camo Design. Dimensions: 30"H x 30"W x 14.5"D. Made In USA

Fits slant 4 X 12 cabinets except the 1960TV.

Road rack castors.

Large swivel, sold individually.

Stainless steel flat head Phillips self-tapping screws. #6 x ¾" length. Good for use with #'s 6 and 7.

Gold rivets for fastening corners. Box of 100.

1" stainless steel Phillips flat head screw.

Nut - Keps, Zinc, fits Screws for Chassis Straps, 8-32 X 3 1/4, Each

Strap - Chassis Strap Small, 3 in. Long, Nickel

Strap - Chassis Strap, Medium, 4.63" Long, Black

Strap - Chassis Strap, Large, 5.65" Long, Black

1" panhead, Phillips screw with matching t-nut. (package of 4)

Bayonet lamp sockets for #44 and #47 lamps, etc.

Long life general replacement lamps for dials, indicators, etc.

105/125V, .002 amps, screw base, type T-4 1/4. Long life general replacement lamps for dials, indicators, etc.

Long life general replacement lamps for dials, indicators, etc.

Long life general replacement lamps for dials, indicators, etc.

Package of 5. Color Green Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°

Original Marshall burgundy leather handle for AS Series amps. Gold hardware, yellow stitching. Marshall Part: M-HNDL-00009

Fuse block.

Protect electrical wires and cables from sharp edges in holes drilled through chassis boxes. Groove is 1/16 wide on all grommets listed.

Long life general replacement lamps for dials, indicators, etc.

Bezel Assembly with 3mm Red LED. Required hole size: 0.25". Washer and hex nut included. LED Specifications: Color Red Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°

Generic amp chassis straps. Nickel. Long. Total Length: 5.65", Center to center: 5.00" Screws are not included. Sold individually

Long life general replacement lamps for dials, indicators, etc. Sold in package of 10 bulbs.

Bayonet lamp sockets for #44 and #47 lamps, etc.

Corner wraps around inside edge of cabinet. Works on ¾" of wood + material thickness. Countersunk mount holes, 20 gauge steel, ½" radius. Sold individually.