Products
No product page found for product capacitors.
Showing search results for capacitors
Showing results for capacitor. Search instead for capacitors
Transformer - Hammond, Tube Driver Interstage
Audio watts: 4
Impedance: 5k ohms
D.C. Resistance: 178 ohms
Inductance: 44 henries
Rated D.C. Bias Current: 30 mA
Features:
Impedance: 5k ohms
D.C. Resistance: 178 ohms
Inductance: 44 henries
Rated D.C. Bias Current: 30 mA
Features:
- Designed for driver use ONLY in single ended tube output amplifiers. These units replace coupling capacitor circuits for improved sound.
- Closed style with minimum 8" long leads.
- All models use bifilar wound windings for exceptional coupling and bandwidth.
- Minimum frequency response 20 Hz. - 20 Khz (± 1db max. ref. 1 Khz.).
- The core is gapped to support the specified D.C.
$117.55
Chassis - Marshall Style JTM-45 with front and back plates
Marshall™ style JTM45 chassis w/ front and back plates
Chassis Measurements:
Compatible Part Links:
- Brushed aluminum chassis, .07" thick.
- Gold “plexi” style front and back plates
- 8-Pin (Octal) socket holes: 3
- 9-Pin (miniature) socket holes: 3
- Capacitor mounting holes:1
- Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"
Chassis Measurements:
- Power transformer mounting centers: 3-7/16” x 2-3/4”
- Output transformer mounting centers: 2-1/2” x 2-3/8”
- Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
- Can cap mounting centers : 2”
- Octal (8-pin) tube sockets: 1-1/2”
- Noval (9-pin) tube sockets: 1-1/8”
Compatible Part Links:
- Noval socket with shield base: P-ST9-700
- Noval socket (no shield): P-ST9-600
- Octal socket : P-ST8-600
- Output transformer: P-T1750Q
- Choke: P-C194G
$104.95
Chassis - Marshall Style 18 Watt Tremolo
Marshall™ style 18 Watt Tremolo chassis w/ front and back plates
Chassis Measurements:
Compatible Part Links:
- Brushed aluminum chassis, .07" thick.
- Gold “plexi” style front and back plates
- 9-Pin (miniature) socket holes: 6
- Capacitor mounting holes:1
- Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"
Chassis Measurements:
- Power transformer mounting centers: 3-1/8” x 2-1/2”
- Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
- Can cap mounting centers : 2”
- Noval (9-pin) tube sockets: 1-1/8”
Compatible Part Links:
- Noval socket with shield base: P-ST9-700
- Noval socket (no shield): P-ST9-600
$85.95
Chassis - Marshall Style 18 Watt TMB
Marshall™ style 18 Watt TMB chassis w/ front and back plates
Chassis Measurements:
Compatible Part Links:
- Brushed aluminum chassis, .07" thick.
- Gold “plexi” style front and back plates
- 9-Pin (miniature) socket holes: 6
- Capacitor mounting holes:1
- Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"
Chassis Measurements:
- Power transformer mounting centers: 3-1/8” x 2-1/2”
- Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
- Can cap mounting centers : 2”
- Noval (9-pin) tube sockets: 1-1/8”
Compatible Part Links:
- Noval socket with shield base: P-ST9-700
- Noval socket (no shield): P-ST9-600
$79.95
Parts Kit - MKIII / MKIV Fuzz Pedal, Premium Build
PCB and parts kit for the MKIII / MKIV fuzz. This kit includes all of the resistors, capacitors, diodes, potentiometers, and terminal pins used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
Starting at $63.61
Parts Kit - Zonk Machine, PCB Version, Premium Build
PCB and parts kit for the Zonk Machine. This is based on the original PCB version. This kit includes all of the resistors and capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$62.69
Parts Kit - Eyelet-Rite Fuzz Pedal, Germanium Version, Premium Build
Parts Kit - Eyelet-Rite Fuzz Pedal, Germanium Version, Premium Build PCB and parts kit for the Eyelet-Rite fuzz pedal. This is based on the point to point version of the germanium Mosrite Fuzzrite pedal. This kit includes all of the resistors, capacitors, eyelets, and the footswitch used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$61.47
Pickup - Kent Armstrong, Custom Series, Stealth 90, P-90
Single P-90 pickup with a nickel-plated metal cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating! If you love P-90s and want to forget about not being able to use your favorite guitar because of lighting and power issues you simply have to get into a set of new Stealth 90 pickups. Recommended wiring includes using a 500K Ohm pot for volume, 250K Ohm pot for tone and a .022 capacitor as these are humbucking pickup designs.
Starting at $57.95
Parts Kit - MKII Fuzz Pedal, Stripboard Professional Version, Premium Build
PCB and parts kit for the MKII fuzz pedal. This is based on the classic stripboard Tone Bender Professional. This stipboard fuzz circuit was also used in some versions of the Supa Fuzz as well as some other fuzz pedals. This kit includes all of the resistors, capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
Starting at $58.23
Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
$59.95
Pickup - Kent Armstrong, Custom Series, Stealth 90, bridge
Single P-90 pickup for bridge position with a cream colored plastic cover. This new revolutionary design gives the sweet, warm chime and tone of the original P-90 pickup without all that annoying 60 cycle hum. Read the forums on this HP-90 pickup and don't let the high resistance fool you. Making its debut at the 2012 summer NAMM show, this design uses the hum-cancelling properties of opposing coils but defies the normal high output that would accompany similar resistance designs. Available in both bridge and neck positions so you can create a proper calibrated set and in black and cream plastic as well as real metal covers in black, chrome, gold and nickel plating!
$57.25
Cap Set - for Early 80s Marshall JCM800 2203, 4103 (100W Master)
Replacement electrolytic capacitor set.
Basic set includes:
Basic set includes:
- (6) C-EC50-50-500CE
- (2) C-ET10-160
- (6) C-EC50-50-500FT (F&T)
- (2) C-SA10-150 (Sprague Atom)
Starting at $56.70
package of 8
Parts Kit - V828 Italian Fuzz Pedal, PCB Version, Premium Build
PCB and parts kit for the V828 fuzz pedal. This is based on the classic Italian-made V828 Tone Bender. These were also sold under the Jen brand. This kit includes all of the resistors, capacitors, and solder tags used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$55.02
Parts Kit - Iss 2 Fuzz Pedal, BC108 style, Premium Build
PCB and parts kit for the Iss 2 fuzz built in the style of a BC108 Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC108 style parts kit, a pair of BC108C transistors are included.
$51.52
Parts Kit - Iss 2 Fuzz Pedal, BC183KA style, Premium Build
PCB and parts kit for the Iss 2 fuzz built in the style of a BC183KA Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC183KA style parts kit, a pair of BC183A transistors are included.
$51.48
Parts Kit - Iss 1 Fuzz Pedal, Standard Version, Premium Build
PCB and parts kit for the Iss 1 fuzz built in the style of the standard germanium Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$50.10
Digital Capacitance Meter - YF-150, 9 ranges
Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc.
- 0.1 pf to 20,000 μF, 9 ranges
- Over range indicator
- 0.5% basic accuracy
- Tilt stand
- 3-1/2 digit LCD, 1" h x 2-¼" w
- 1.5" x 2.8" x 6"
- Zero adjustment
- Input protected
- Low battery indicator
- Includes case, leads, battery, spare fuse and instructions
$49.95
Soldering Iron - Weller SPG80L, 80 watts
The Weller SPG80L is a heavy duty 80 Watt soldering iron. It is ideal for soldering chassis connections in classic amps such as can capacitors and can be used in many other applications. This soldering iron has an indicator light that shows when the iron is turned on for safe use. The barrel is stainless steel and the rugged tip is replaceable. The impact resistant handle remains cool when in use. Features:
- 900°F tip temperature suitable for chassis soldering and other heavy duty applications
- Indicator light to show when the iron is on
- 3/8” chisel tip
- 6 foot power cord
- Metal stand included
$49.95
Pedal Kit - Mod® Electronics, Step Ladder, Input Attenuator
The Mod® Electronics Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.
$49.95
Capacitor - 3x365pF, Variable, 3 Section
Three section variable or tuning capacitor. Each section is 365pF. 3 1/4 long frame 1/4" x 1" shaft. This capacitor is the largest condenser currently in production and can deliver a total capacitance of almost 1100 pF.
$49.95
Vacuum Tube - 6087 / 5Y3WGTB, Rectifier, Full Wave
Full-wave high-vacuum rectifier for use in power supplies of moderate current requirements. The tube incorporates a unipotential cathode which is internally connected to the filament.
$49.90
Parts Kit - Supa Fuzz Pedal, PCB Version, Premium Build
PCB and parts kit for the Supa Fuzz. This is based on the classic PCB version produced by Marshall. This kit includes all of the resistors and capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$49.70
LiteIIB 18W Kit - Scratch Build Parts
GuitarAmplifierPCBs.com 18 Watt LiteIIb "Baby Will" Parts List for Scratch Build The Baby Will is a PCB simplified version of the legendary Marshall 18 Watt 1974x circuit. The circuit we laid out on a circuit board is known as the LiteIIb. It's capable of tone from clean jazz, crunchy blues, to raunchy classic rock. Crank up the volume and you'll be in AC/DC Back In Black heaven. The magic of the LiteIIb is its simplicity.
$48.47
package of 22
Parts Kit - HS Treble Booster Pedal, Si Version, Premium Build
PCB and parts kit for the HS Treble Booster. This is based on the more common silicon version that used a 2N4061 transistor. This kit includes all of the resistors, and capacitors used on the included circuit board. A 2N4061 transistor is included. In addition to the PCB parts, a footswitch, jacks, battery snap, and ground lug are all included in this parts kit.
$48.11