Pedal Parts / DIY

¼" Jack - Fender®, Mono, PC Mount, Closed Circuit
PCB mount Fender original mono jack. Closed circuit.
$5.75
Parts Kit - Supa Fuzz Pedal, PCB Version, Premium Build
PCB and parts kit for the Supa Fuzz. This is based on the classic PCB version produced by Marshall. This kit includes all of the resistors and capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$49.70
Potentiometer - Alpha, W-Taper, Solid Shaft, Right Angle, 16mm, 20kΩ
20kΩ W taper Alpha 16mm pots with a solid shaft and right angle PC mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.
  • Threading: M7 x 0.75
  • Distance between terminals: 5 mm (0.197”)
  • Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
  • Lead Distance from shaft center: 16 mm (0.630”)
  • Lead Thickness: 0.5 mm (0.020”)
  • Shaft Diameter: 6.35 mm (0.25”)
$0.85
Transistor - 2N3906, TO-92 case, PNP, Lead Free
General purpose low-power PNP bipolar junction transistor, used frequently in hobbyist electronic projects. This version is lead free.
For a lead free 2N3904 see P-Q2N3904-LF.
$0.53
Chassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"
Special Order Item
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Add 0.16" to enclosure depth for lid.
$8.73
Out of Stock
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Predrilled
Colors Available:
Predrilled 1590BB enclosures. Measures 4.71" x 3.70" x 1.18" deep. These enclosures come drilled with holes for pots, footswitch and top mounted jacks.
  • Standard size footswitch mounting hole fits 12mm or 15/32” bushings
  • ⅜” mounting holes for top mounted jacks
  • Enclosed or low profile ¼” jacks recommended
  • Top mounted DC jack mounting hole fits common switched jacks such as S-H750-X and P-JBLB-IN-S
  • 8mm potentiometer mounting holes fit a variety of different pot sizes but 16mm pots are recommended.
Starting at $9.95
Diode - 1N4739A, 9.1V, Zener, 1W, 5% Tolerance
1N4739A 9.1V zener diode in a DO-41 package. A semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
$0.27
Knob - Cliff, K1C, Set Screw, 25.4 x 15.1mm
Cap Colors Available:
Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.
  • Height: 15.1mm
  • Diameter: 25.4mm
  • Fits ¼" shaft with set screw
Starting at $1.85
Power Supply - Power-All® ECO-Dapter®, Cable Kits, for Effects Pedals
Power-All® ECO-Dapter® is a center negative 9VDC power supply for effects pedals that can supply up to 2000mA of power making it a great choice for pedals boards and power hungry effects. Power-All® kits include a variety of useful cables for powering multiple pedals to the ECO-Dapter® 9V supply.
Starting at $30.95
Knob - Dunlop, MXR Knob for pedals, skirted
Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.
$3.70
¼" Jack - Stereo, Panel Mount, Low Profile
Panel mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
  • M9*0.75 Bushing Thread
  • Stereo 3-Conductor (TRS)
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$0.99
Op-Amp - LM833, Dual, Low Distortion, Audio, 8-Pin DIP
LM833 dual op amp in an 8-pin dip package. The LM833 is a dual general purpose operational amplifier designed with particular emphasis on performance in audio systems. This dual amplifier IC utilizes new circuit and processing techniques to deliver low noise, high speed and wide bandwidth without increasing external components or decreasing stability. The LM833 is internally compensated for all closed loop gains and is therefore optimized for all preamp and high level stages in PCM and HiFi systems. The LM833 is pin-for-pin compatible with industry standard dual operational amplifiers. Features
  • Wide dynamic range: >140dB
  • Low input noise voltage: 4.5nV/ √ ^Hz
  • High slew rate: 7 V/μs (typ); 5V/μs (min)
  • High gain bandwidth: 15MHz (typ); 10MHz (min)
  • Wide power bandwidth: 120KHz
  • Low distortion: 0.002%
  • Low offset voltage: 0.3mV
  • Large phase margin: 60°
$1.19
Op-Amp - TL082, Dual, Wide-Bandwidth, JFET Input, 8-Pin DIP
Dual wide-bandwidth TL082 opamps in an 8-pin DIP package. The TL082 offers a high input impedance and 4MHz bandwidth.
$0.34
Op-Amp - NJM4558, Dual high-gain, 8-Pin DIP
Dual Operational Amplifier. The NJM4558 (JRC4558) integrated circuit is a dual high-gain operational amplifier internally compensated and constructed on a single silicon chip using an advanced epitaxial process. Combining the features of the NJM741 with the close parameter matching and tracking of a dual device on a monolithic chip results in unique performance characteristics. Excellent channel separation allows the use of the dual device in single NJM741 operational amplifier applications providing density. It is especially well suited for applications in differential-in, differential-out as well as in potentiometric amplifiers and where gain and phase matched channels are mandatory. Features:
  • Operating Voltage (±4V~±18V)
  • High Voltage Gain (100dB typ.)
  • High Input Resistance (5MΩ typ.)
  • Bipolar Technology
$0.90
CMOS - CD4015, Dual 4-Stage Static Shift Register, 16-Pin DIP
CD4015B consists of two identical, independent, 4-stage serial-input/parallel-output registers. Each register has independent CLOCK and RESET inputs as well as a single serial DATA input. "Q" outputs are available from each of the four stages on both registers. All register stages are D-type, master-slave flip-flops. The logic level present at the DATA input is transferred into the first register stage and shifted over one stage at each positive-going clock transition. Resetting of all stages is accomplished by a high level on the reset line.
$0.75
Knob - Davies, 1400, Daka-ware, Small, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.
  • Height: 0.38 in.
  • Length: 0.84 in.
  • Fits ¼" shaft with set screw
$1.99
Knob - Aluminum, Set Screw, Short Line, 0.495" Diameter
Colors Available:
Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
$1.85
Wire - 20 AWG Stranded Core, Lacquered Cloth Cover, 600V
Colors Available:
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 105°C temperature rating, 600V. For a solid core version, see: S-W8XL
Starting at $4.50
¼" Jack - Cliff, Solder Lug, Non-Switched, Plastic Nut
Solder terminals, non-switched. Used in many vintage pedals and amplifiers. For the switched version, see S-H902-X. Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a black nylon hexagonal mounting nut
  • Designed to receive both mono and stereo ¼" jack plugs
  • Withstand Voltage: 2000VDC Min.
  • Maximum Current: 5A
  • Temperature Rating: -10°C ~ +70°C
  • Life (Minimum): 10,000+ Operations
  • Nominal Contact Resistance: < 50 mΩ
Starting at $1.59
Pedal Box - 12” x 5” x 4", Fits Wah Pedals and Loopers
High quality crush-proof boxes that are perfectly sized for larger stompboxes. This cardboard box features triple wall sides and double wall front and bottom ensuring a safe housing for your pedals. The inside dimensions 12” x 5” x 4" fit wah pedals, 1032L (looper enclosure), and other large pedals along with accessories such as power supplies or cables. These boxes are ideal for storing or packaging effects pedals.
$2.59
Battery Holder - 9V, Chassis Mount, Horizontal
High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The horizontal mount and small footprint of the holder allows for easy placement where vertical space is limited.
$1.25
Knob - Push-On, Marshall Style, black base
Cap Colors Available:
.77" diameter x .62" tall. Fits both fine and coarse knurled pot shafts.
$1.45
Solder Lug - ⅜” Hole, Locking Washer
Angled solder terminal on a locking washing for ⅜” bushings. Perfect for adding chassis ground connections on switches, jacks, pots, and any other ⅜” bushing part.
$1.50
package of 10
Rubber Tread - Dunlop, Fuzz Face
Genuine rubber tread for Fuzz Face pedals from Dunlop. The tread is for full size Fuzz Face enclosures and has a cutout for the footswitch and text logo. The tread comes with a 3M adhesive backing.
$11.00