Pedal Parts / DIY

Chassis Box - 1590LB, Diecast, 1.99″ x 1.99″ x 1.22″
1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.
$3.95
Bezel / Nut - Cliff, For S4, Combined Nut / Bezel, Black
Genuine Cliff™ replacement combination nut/bezel for S4 Series jacks.
  • 3/8” thread diameter/20 TPI
  • 3/16” thread length
  • 7/16” nut
  • Used on many Marshall amps
  • Matte black finish
  • Sold individually.
$0.45
Bumper - Morley, tapered rubber feet, self adhesive
Small tapered rubber feet with self-adhesive backing (package of 20). Can be used to provide grip and slight elevation (about 0.14") when secured to most project enclosures. Great for effects pedals and rack mount units when removed from the rack.
$5.00
package of 20
9V Battery Cushion - Vinyl Foam Tape, 3M, ½” x 2”
1/2 inch by 2 inch adhesive foam strip for cushioning 9V batteries in pedal enclosures. This black, medium density foam used an acrylic adhesive and paper liner. The high quality 3M materials ensure a durable foam and lasting adhesive. Made with ¼ inch thick foam.
$0.65
Knob - Rogan, PT Series, 6PS, Extra Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.63 in.
  • Diameter:1.25 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.
$1.95
Switch - Carling, Mini Toggle, DPDT, 3-Position, PC Pins
Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.
Starting at $3.85
¼" Jack - Stereo, PC Mount, for Fender® Amps '88 - '99
Fender® Style replacement ¼" stereo input jack that has 9 PCB mount terminals.
$2.40
Transistor Set - tested and selected for Fuzz Face, 2N1309, PNP, Germanium
This is a set of two 2N1309 germanium transistors that have been hand-selected to work in the germanium Fuzz Face circuit. Also included are 4 metal film resistors to use in the circuit. In most cases, the values have been modified from the stock values slightly to ensure that the collector of Q2 biases to roughly -4.5V. A data sheet containing the schematic and the resistor values is included so that you can use your own resistor type if you would prefer. There is a range of bias voltages that can sound nice in a Fuzz Face, and voltages in original units varied. These transistors have been tested with bias voltage, sound, and noise level in mind. Note that due to a variety of factors such as battery/PSU voltage, temperature, and component tolerance, the voltage on the collector of Q2 may not measure at exactly -4.5V, but it should be close in a properly-built circuit.
$24.95
Capacitor - 50V, 0.047µF, Used In Pedal Kits
Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.047µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C
$1.00
Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Colors Available:
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $13.95
Transistor - 2N1305, Germanium, TO-5 case, PNP
2N1305 PNP germanium transistors. The 2N1305 is a popular PNP for fuzz pedals and other effects. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.
$2.95
¼" Jack - Rean, Stereo, Horizontal, Switched, Plastic Nut, PC
3 pole horizontal 1/4" jack, all contacts switched, gold plated contacts, plastic housing with nut and washer
$1.35
Knob - Chicken Head, set screw, brass inset
Colors Available:
  • Fits ¼" Solid Shafts (Set Screw)
  • Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
  • Brass Set Screw and Insert
  • High Quality Plastic
Starting at $1.30
Machine Pin Socket - Press-Fit, PCB Mount, Single Position
Single position machine pin sockets. These pressfit sockets are mounted by inserting into a PCB hole and applying some force. They stay firmly in place with tension and can then be easily soldered to the circuit board. These sockets can fit any pin spacing, such as the non-standard 0.15” spacing of the vintage-style stripboard (vs. 0.10” on standard stripboard). They can also jump rows so that they are not all in a line. The press-fit machine pin sockets are also very low profile and have a very minimal impact on the resulting look of the build. For pins sizes .015 -.025". The recommended mounting hole diameter is 0.057".
$6.25
package of 12
Transistor - 2N4403, Silicon, TO-92 case, PNP
The 2N4403 is a silicon general purpose PNP transistor in a TO-92 package. The 2N4403’s typical applications include signal processing, amplification, and switching.
$0.30
Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
Colors Available:
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Add 0.16" to enclosure depth for lid.
Starting at $10.95
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.59
package of 5
Knob - Phenolic, Set Screw, Fairchild Style, Small Pointer, 30mm
Colors Available:
Small phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts.
  • Grip Diameter: 0.559 in.
  • Skirt Diameter: 0.746 in.
  • Length: 1.177 in.
  • Height: 0.550 in.
Starting at $4.70
Footswitch - 3PDT, Alpha, Solder Lugs, Long Bushing
High quality Alpha 3PDT footswitch with solder lugs and a long bushing. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.
  • Bushing Length: 15.25mm
  • Threading: M12 x 0.75
  • Solder Lugs
$4.50
LED Lens - Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Low Profile

For a version that fits 3mm LEDs, see P-L310-X.
Starting at $0.59
Chassis Box - Hammond, 1590STPC, Octagon, 5.23 x 5.23 x 1.38"
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine)
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x 1/2” machine screws secure lid into factory tapped holes
  • Designed to meet IP54
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting
$13.95
Battery Holder - AA, Chassis Mount, Wired, Double
Prewired AA battery holder. This plastic battery holder fits two AA batteries. The six inch leads are prestripped and tinned stranded wire for an easy installation.
$1.30
Knob - Pointer, Skirted, RCA Style, 1.28” Diameter
Colors Available:
Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.
$1.15
ProtoBoard - Fits 1590BB, 1 sided, 2-hole strips
Prototyping circuit board (PCB) designed to fit the Hammond 1590BB die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590BB enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190). Features:
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • Convenient 2-hole pattern provides an easy way to connect parts.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
  • 0.042" holes are drilled on 0.1" (2.54mm) centers. 4 mounting holes.
  • PCB Size 3.20 x 4.25 in (81.3 x 108.0 mm)
$5.75