7/16" dia. x 5/32" high.

Good stomp-box effects switch (Double Pole, Double Throw)

DPDT footswitch, PC mount, same switch as P-H497 but made in Taiwan and PC mount.

Carling, DPDT footswitch (on-on) with solder lugs.

3PDT, PC mount, generic.

Replacement for Boss effects pedals, SPST momentary, push switch. Mounts in square hole approximately.55" x.55" x 1.08" overall length including terminals.

DPDT, PC mount

Carling footswitch, SPST, momentary ON-(OFF) normally closed with solder lugs.

100K Wah pot

Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470K ohm. Original Dunlop replacement part.

1.0" diameter x.6" tall, black with white line and brass insert, set screw. Similar to Dunlop knob.

200K linear Wah pot.

150K linear Wah pot.

Knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.

Stereo jack for Dunlop effects pedals. Original Dunlop replacement part.

This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.

Cool chassis box perfectly suited for effects pedals and other DIY projects. 4.67" x 3.68" x 1.18" Die-Cast Aluminum Includes Box, Lid, And Screws Painted Black

This yellow cup core version is best for attaining a vintage vibe. Use the precision-wound Toroidal, part number P-ECB-FI-02, for the cleanest sound possible. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.

Cool chassis box perfectly suited for effects pedals and other DIY projects. 4.67" x 3.68" x 1.18" Die-Cast Aluminum Includes Box, Lid, And Screws Painted Orange

Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.

Offset grommets. 3 large, 3 small, for Wah.

The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The PA-9S Power-All Single Kit features: Power-All 9 VDC, 2000 milliamp digital power supply Power all your pedals from a single power supply Takes up only one outlet space

The Power-All Deluxe Kit provides 9 volts DC at 2000 milliamps @ more than enough current to power dozens of effect pedals, including up to 4 Line 6 Modelers! The Power-All Deluxe Kit can power eleven pedals out of the box, and comes complete with a variety of jumper cables that allow connection of phone plug, reverse polarity, digital, and battery-only pedal types. New Ten-Foot, 18-gauge output cable allows for longer power runs without the need for an extension cord. The PA-9D Power-All Deluxe Kit features: Power-All 9 VDC, 2000 milliamp digital power supply

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Six 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Painted with tough polyester powder paint for a lasting finish, even after machining. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions.

Rack for Wah.

Gear for Dunlop Wah.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.

Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Six 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.

AC Adapter. Plug type. 9 volt. US. Original Dunlop replacement part.

Replacement bulb for Morley effects pedal.