[Skip to content]

Effect Pedals & Parts

  • Sort:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • View All (15 pages)
Kit - The Verb Deluxe, Digital Reverb Pedal Kit
The Verb Deluxe kit is built around the Belton Digi-Log Mini Module. Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes. The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound.
More Details
$79.95
Footswitch, 3PDT blue
Good stomp-box effects switch (Triple Pole, Double Throw). 3PDT Latching type footswitch. High quality, made in Taiwan.
More Details
$6.95
The Piledriver, Power Boost Effects Pedal Kit
"The PileDriver" is a clean boost kit that will provide up to 38dB of gain to your guitar signal. Use it to push your preamp into overdrive or as a line driver if you are experiencing signal degradation from your effects chain. This is a simple kit and great for beginners!
More Details
$24.95
Bumper, Rubber, Self Adhesive (Package of 20)
7/16" dia. x 5/32" high.
More Details
$5.00
The Persuader, Tube Drive Effects Pedal Kit
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive. This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions. All you need to provide is solder and soldering iron. The Persuader allows for easy access to the tube, giving you the ability to quickly experiment with different tube brands and 12AX7 tube relatives. Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short.
More Details
$64.95
Effects pedal, F.A.N.T.A. Speaker Emulator
The F. A. N. T. A. (Frequency Adapted Natural Tone Accessory, say: 'FANTA') Speaker Emulation is a low impedance, balanced symmetric, transformer coupled output. It gets wired between the speaker output of your amp and the speakers and does not require any power supply or battery. The F.A.N.T.A. provides a 3-pin XLR-Connector for a standard microphone cable to connect to the mixing console, recording system etc.
More Details
$92.95
Footswitch, DPDT for switching and effects, made in Taiwan
Good stomp-box effects switch (Double Pole, Double Throw)
More Details
$3.95
The Rattler, Distortion Effects Pedal Kit
Build your own distortion effects pedal! Easy to build, point to point wiring. Tone similar to the Vintage 60s and 70s effects pedals. Pre-drilled die cast aluminum boxes. Comes with variable components to customize your tone! Uses 9-volt battery which is not included.
More Details
$49.95
Footswitch, Carling DPDT for switching and effects
Good stomp-box effects switch (Double Pole, Double Throw)
More Details
$8.50
Battery Clip - 9 Volt (Package of 3)
Package of three.
More Details
$0.60
Footswitch - DPDT (Latching), PC Mount
DPDT footswitch, PC mount, same switch as P-H497 but made in Taiwan and PC mount.
More Details
$3.95
Footswitch - Carling, Replacement for Fender® & Others, SPST
Carling SPST footswitch. Used in Fender etc. Reverb/tremolo/channel switching pedals, (110-P).
More Details
$5.95
Footswitch - Carling, DPDT, (On-On)
Carling, DPDT footswitch (on-on) with solder lugs.
More Details
$10.95
Footswitch - DPDT, Momentary, Solder Lugs
DPDT momentary footswitch. AC125V/4A AC250V/2A
More Details
$3.95
Footswitch - Triple Pole, Double Throw (3PDT), Blue, PC Mount
3PDT, PC mount, generic.
More Details
$7.95
Footswitch - Carling, SPDT
Carling SPDT footswitch used in footswitch boxes and effects pedals (112-P).
More Details
$7.15
Switch - Replacement for Boss Effects Pedals
Replacement for Boss effects pedals, SPST momentary, push switch. Mounts in square hole approximately.55" x.55" x 1.08" overall length including terminals.
More Details
$2.50
Footswitch - Carling, SPST, Momentary, Off-On, Normally Open
Carling, SPST footswitch, momentary (off-on), normally open with solder lugs.
More Details
$7.95
Footswitch - DPDT, Momentary, with PC Terminals
DPDT, PC mount
More Details
$4.25
Switch - Dunlop GCB-95
GCB-95 switch. Original Crybaby part for all Crybaby models. Original Dunlop replacement part.
More Details
$9.50
Footswitch - Carling, SPST, Momentary, ON-(OFF) Normally Closed
Carling footswitch, SPST, momentary ON-(OFF) normally closed with solder lugs.
More Details
$7.95
Footswitch - Carling, SPST, Momentary, Off-On, Normally Open
Carling, SPST footswitch, off-on, normally open with screw terminals.
More Details
$6.95
Potentiometer - Wah Pot 100K
100K Wah pot
More Details
$8.95
Potentiometer - Hot Potz II Crybaby, 100K
Hot Potz II Crybaby Pot. for newer Crybaby models. Made by Beckman. 100K ohm. Original Dunlop replacement part.
More Details
$19.95
Potentiometer - Hot Potz 470K
Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470K ohm. Original Dunlop replacement part.
More Details
$19.95
Potentiometer - Wah Replacement, Life Potentiometer - Smooth 100K
100K Life Pot is a high grade Wah pot replacement. This wah pedal upgrad is sold with all necessary hardware and gear for immediate installation.
More Details
$11.95
Knob - Black with Line set screw 1.0" x .6" tall
1.0" diameter x.6" tall, black with white line and brass insert, set screw. Similar to Dunlop knob.
More Details
$1.30
Potentiometer - Wah Pot 125KL
125K linear Wah pot.
More Details
$8.95
Potentiometer - Wah Pot 200KL
200K linear Wah pot.
More Details
$8.95
Potentiometer - Wah Pot Replacement for Ibanez 16mm Dual 500K/50K Linear
500K/50K dual wah replacement for Ibanez WH10. Rated Power: 0.2 Watt max
More Details
$3.95
Potentiometer - Wah Pot 150KL
150K linear Wah pot.
More Details
$8.95
Potentiometer - Dunlop, Wah Pot 20K for Bass
Dunlop 20K pot for the 105Q Crybaby Bass Wah.
More Details
$19.95
Knob - Dunlop, Cover for P-ECB-130
Knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.
More Details
$1.65
Knob - Dunlop
Original MXR knob for Dunlop pedal. Original Dunlop replacement part.
More Details
$2.95
Jack - Dunlop Instrument Stereo Jack
Stereo jack for Dunlop effects pedals. Original Dunlop replacement part.
More Details
$3.35
Chassis Box - 110mm x 58mm x 30mm
4.39" x 2.34" x 1.06" D. Equivalent to Hammond 1590B.
More Details
$5.95
Inductor Fasel Troidal Model (Red), Dunlop
This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.
More Details
$12.75
Chassis Box - Made in Taiwan, Diecast Aluminum
Same as Hammond 1590BB but a generic manufacture from Taiwan. 4.7" x 3.7" x 1.18" depth.
More Details
$8.95
Chassis Box, Die-Cast Aluminum, Black
Cool chassis box perfectly suited for effects pedals and other DIY projects. 4.67" x 3.68" x 1.18" Die-Cast Aluminum Includes Box, Lid, And Screws Painted Black
More Details
$9.25
Chassis Box, Die-Cast Aluminum, Red
Cool chassis box perfectly suited for effects pedals and other DIY projects. 4.67" x 3.68" x 1.18" Die-Cast Aluminum Includes Box, Lid, And Screws Painted Red
More Details
$9.25
Inductor Fasel Cup Core Model (Yellow), Dunlop
This yellow cup core version is best for attaining a vintage vibe. Use the precision-wound Toroidal, part number P-ECB-FI-02, for the cleanest sound possible. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.
More Details
$12.75
Chassis Box, Die-Cast Aluminum, Purple
Cool chassis box perfectly suited for effects pedals and other DIY projects. 4.67" x 3.68" x 1.18" Die-Cast Aluminum Includes Box, Lid, And Screws Painted Purple
More Details
$9.25
Chassis Box, Die-Cast Aluminum, Orange
Cool chassis box perfectly suited for effects pedals and other DIY projects. 4.67" x 3.68" x 1.18" Die-Cast Aluminum Includes Box, Lid, And Screws Painted Orange
More Details
$9.25
Chassis Box - 119mm x 60mm x 40mm
Equivalent to Hammond 1590N1. Measures 4.77" x 2.60" x 1.39".
More Details
$6.25
PC Board - Crybaby
Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.
More Details
$21.95
Chassis Box, Die-Cast Aluminum, Green
Cool chassis box perfectly suited for effects pedals and other DIY projects. 4.67" x 3.68" x 1.18" Die-Cast Aluminum Includes Box, Lid, And Screws Painted Green
More Details
$9.25
Box - Hammond, Unpainted Aluminum, 3.64" x 1.52" x 1.06" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$6.65
Box - Hammond, Unpainted Aluminum, 4.37" x 2.37" x 1.22" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$7.60
Grommets - Dunlop, Offset, 3 Large, 3 Small
Offset grommets. 3 large, 3 small, for Wah.
More Details
$2.50
Chassis Box - Made in Taiwan, Diecast Aluminum, Pre-drilled
Same as Hammond 1590BB, but generic manufacture made in Taiwan. Measures 4.67" x 3.68" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ 1/2" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia.
More Details
$9.95
9-volt digital power supply, Power All System
The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet! The PA-9S Power-All Single Kit features: Power-All 9 VDC, 2000 milliamp digital power supply Power all your pedals from a single power supply Takes up only one outlet space
More Details
$17.95
Effects pedal, Maxon OD 808 Overdrive
The Original Overdrive! The OD808 is often imitated but never matched! Identical to the 1970s circuit and featuring the JRC4558 IC chip, it offers warm, smooth, transparent overdrive that'll make your rig scream! The OD808's dynamically responsive circuitry reacts precisely to individual playing styles, letting the true voice of any instrument or artist shine through. Don't settle for copies when you can have the original.
More Details
$149.00
Box - Hammond, Unpainted Aluminum, 4.67" x 3.68" x 1.18" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$9.85
Kit, Power All System deluxe for effects pedals
The Power-All Deluxe Kit provides 9 volts DC at 2000 milliamps @ more than enough current to power dozens of effect pedals, including up to 4 Line 6 Modelers! The Power-All Deluxe Kit can power eleven pedals out of the box, and comes complete with a variety of jumper cables that allow connection of phone plug, reverse polarity, digital, and battery-only pedal types. New Ten-Foot, 18-gauge output cable allows for longer power runs without the need for an extension cord. The PA-9D Power-All Deluxe Kit features: Power-All 9 VDC, 2000 milliamp digital power supply
More Details
$39.95
Chassis Box - 110mm x 58mm x 30mm, Black
4.39" x 2.34" x 1.06" D. Equivalent to Hammond 1590B, black finish.
More Details
$7.95
Box - Aluminum, Unpainted, 7.38" x 4.70" x 2.05" D, Hammond
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Six 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$18.15
Chassis Box - Made in Taiwan, Diecast Aluminum, Pre-drilled
Same as Hammond 1590BB, but generic manufacture made in Taiwan. Measures 4.67" x 3.68" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ 1/2" dia., 2 @ 3/8" dia, and 1 @ 8 mm dia.
More Details
$9.95
Box - Aluminum, Unpainted, 4.72" x 3.70" x 2.07" D, Hammond
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$11.10
Battery Box - Dunlop
Dunlop battery box for Cry Baby and Volume Wahs.
More Details
$1.50
Box - Hammond, Black Aluminum, 4.67" x 3.68" x 1.1" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Painted with tough polyester powder paint for a lasting finish, even after machining. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions.
More Details
$12.80
Bottom Plate for GBC-95 with Battery Door
Bottom Plate with Battery Door for GCB-95. Original Dunlop replacement part.
More Details
$11.75
Rack for Wahs, Dunlop
Rack for Wah.
More Details
$1.95
Photo Cell for Morley Effects Pedals
Photo cell for morley effects pedals.
More Details
$2.50
Gear for Dunlop Wah
Gear for Dunlop Wah.
More Details
$1.95
Box - Hammond, Unpainted Aluminum, 5.3" x 4.4" x 1.5" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$12.45
Effects pedal, Maxon OD9
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists. Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
More Details
$142.95
Box - Hammond, Unpainted Aluminum, 1.99" x 1.99" x 1.06" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$6.85
Inductor, 500mH
500mH inductor for all Crybaby models. Original Dunlop replacement part.
More Details
$11.50
Rubber feet with screws
Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)
More Details
$2.50
Box - Hammond, Unpainted Aluminum, 7.38" x 7.38" x 2.48" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Six 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions.
More Details
$26.05
Box - Hammond, Unpainted Aluminum, 5.3" x 4.4" x 2.2" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$13.70
Box - Hammond, Unpainted Aluminum, 4.77" x 2.6" x 1.39" Depth
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
More Details
$10.35
Box - Hammond, Unpainted Aluminum, 7.38" x 4.70" x 3.07" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Six 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions.
More Details
$19.40
Footswitch - Dunlop, DPDT, PC Mount, for MXR
DPDT, PC mount footswitch for MXR.
More Details
$14.25
Box - Hammond, Unpainted Aluminum, 4.70" x 4.70" x 3.54" Depth
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. Dimensions shown are exterior dimensions. Add 0.16" to enclosure depth for lid.
More Details
$20.80
Effects pedal, ProCo Rat-2
The world renowned premier distortion device with the unique Rat tone. Smooth continuously variable controls for distortion amount, filter cutoff and volume level. Mechanical switch and LED status indicator. Glow in the dark graphics on an indestructible steel enclosure. Input Impedance 1 MΩ Equivalent Input Noise -110 dB Output Impedance 1 kΩ Maximum Gain 60 dB Filter 6 dB/octave low-pass Power Requirements 9V battery or external DC power supply (RPS-1) Battery Consumption 7.8 mA/100 hours Height 3-1/8" (79.4mm) Depth 4-1/16" (103.2 mm) Width 3-1/2" (88.9 mm) Weight
More Details
$74.95
Rack for Wahs, Generic
Replacement rack for wahs.
More Details
$1.25
Effects pedal, Morley Steve Vai Bad Horsie 2 contour wah
The Ultimate Wah; an Electro-Optical, switchless Wah set to Steve Vai's precise specifications with two foot switchable wah modes; Bad Horsie WAH and CONTOUR WAH. In CONTOUR mode, two knobs allow you to alter the wah frequency and level. Equipped with our "True-Tone Bypass" buffer circuitry to prevent signal loading and maintain guitar tone/volume. Also equipped with LED indication and easy access battery compartment. Love the Bad Horsie? You 'll love this one more!
More Details
$109.95
Effects pedal, Morley George Lynch Dragon 2
This second Wah offering from George Lynch and Morley is a switchless, Electro-Optical Wah with THREE Wah modes: Wah (traditional), Wow (bit of overdrive with unique vowel-like tone) and Wah Lock (allows user to electronically lock the Wah in Wah mode. A NOTCH knob allows you to dial in the appropriate Wah frequency. Decked out in Ninja Red with black details and a unique Graphic Treadle Rubber. Suitable for Guitar, Bass or Keys
More Details
$149.00
Adapter - AC Plug, 9 Volt, US
AC Adapter. Plug type. 9 volt. US. Original Dunlop replacement part.
More Details
$11.75
Effects pedal, Morley Power Wah
The new HQ2 inductor gives the Power Wah vintage tone with modern features. This Electro-Optical Wah has a Wah level knob, LED indication and an easy access battery. It is also equipped with TrueTone Bypass that drives long cables and prevents signal loading. The best of both vintage and modern sounds!
More Details
$75.00
Effects pedal, Morley T.M. Stevens Wah
T.M. Stevens helped Morley create the ultimate Bass Wah. This switchless Wah has two footswitchable wah modes - Traditional and FONK Wah; both voiced for Bass Guitar frequencies. Traditional Wah mode gives you that vintage Wah tone you'd expect. Click on the FONK Wah switch and you get a lively, percussive and FONKY Wah that is great for slappin' and poppin'. Comes with a trim knob and LED for adjusting input level for active or passive pickups.
More Details
$114.95
AC Adapter Barrel, 9 Volt, US
AC Adaptor. Barrel type. 9 Volt. US. Original Dunlop replacement part.
More Details
$11.75
Bulb - Morley Effects Pedals Replacement
Replacement bulb for Morley effects pedal.
More Details
$0.95
Tube Complement for Vox V9320 Cambridge Reverb 30 Twin
Tube Complement for Vox V9320 Cambridge Reverb 30 Twin Includes: (1) T-12AX7-S-JJ
More Details
$9.85
$9.36
Effects Pedal - Dunlop, JHOC1 Jimi Hendrix Octavio
Reproduced the unforgettable fuzzed-out octave tones heard on "Purple Haze" and "Fire." An exact clone of the amazing "octave up" pedal that Jimi used.
More Details
$169.99
Tube Complement for Vox AC50CPH, CP2
Tube Complement for Vox AC50CPH, CP2 Includes: (2) T-EL34-JJ · (4) T-12AX7-S-JJ · More...
More Details
$69.80
$66.31
Tube Complement for Vox AC15H1TV & AC15HTVH
Tube Complement for Vox AC15H1TV & AC15HTVH Includes: (1) T-6CA4-JJ · (2) T-EL84-JJ · (1) T-EF806S-JJ · (3) T-12AX7-S-JJ · More...
More Details
$88.75
$84.31
Effects Pedal - Dunlop, M234 MXR Analog Chorus
Analog Chorus All-analog bucket-brigade circuitry. Create classically lush, liquid textures. Ultimate tone control. This all-analog pedal uses bucket-brigade circuitry to create classically lush, liquid textures that you just can't get with digital circuitry. Rate, Level, and Depth controls, as well as knobs for cutting High and Low frequencies allow ultimate tone control. Like all MXR pedals, the M-234 comes in a heavy-duty housing with durable jacks and switches for a lifetime on the road. Analog Chorus
More Details
$99.99
Tube Complement for Vox AD120VTX
Tube Complement for Vox AD120VTX Includes: (2) T-12AX7-S-JJ
More Details
$19.70
$18.72
Tube Complement for Vox AC15TB & TBX
Tube Complement for Vox AC15TB & TBX Includes: (1) T-5Y3-S-JJ · (2) T-EL84-JJ · (5) T-12AX7-S-JJ · More...
More Details
$87.10
$82.75
Tube Complement for Vox Cooltron Series
Tube Complement for Vox Cooltron Series Includes: (1) T-12AU7-JJ
More Details
$9.20
$8.74
The Thunderdrive, Overdrive Pedal Kit
The Thunderdrive is an overdrive pedal kit that will provide a signal boost at low gain settings and its own distortion at maximum gain settings. You can use it to push your preamp into overdrive or as a source of smooth distortion. Adjusting volume control and gain control results in a wide variety of tones in spite of its simple construction. This pedal is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. Using point to point wiring and easy to follow instructions you can have a working overdrive pedal in a matter of hours.
More Details
$29.95
Tube Complement for Vox AC30/6TB & AC30/6TBX
Tube Complement for Vox AC30/6TB & AC30/6TBX Includes: (1) T-5AR4-JJ · (4) T-EL84-JJ · (1) T-12AU7-JJ · (5) T-12AX7-S-JJ · More...
More Details
$119.05
$113.10
Tube Complement for Vox ToneLab Series
Tube Complement for Vox ToneLab Series Includes: (1) T-12AX7-S-JJ
More Details
$9.85
$9.36
The Thunderdrive Deluxe, Overdrive Pedal Kit
The Thunderdrive Deluxe is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings.
More Details
$39.95
Tube Complement for Vox AC30CCH,CC1, CC2, CC2X
Tube Complement for Vox AC30CCH,CC1, CC2, CC2X Includes: (1) T-5AR4-JJ · (4) T-EL84-JJ · (3) T-12AX7-S-JJ · More...
More Details
$89.65
$85.17
Tube Complement for Vox V9130 Cambridge 30 Reverb
Tube Complement for Vox V9130 Cambridge 30 Reverb Includes: (1) T-12AX7-S-JJ
More Details
$9.85
$9.36
The Trill Tremolo, Tremolo Tone Pedal Kit
The Trill tremolo pedal offers classic tremolo tones in an easy to build kit. The Trill's speed knob provides a wide range from a very slow to rapid fire effect. The depth knob varies the ratio between effected and dry signal. Using modern, low noise transistors makes operation of The Trill quiet with no signal drop when engaged. The Trill uses true bypass foot switching so it is out of the signal path when not engaged. All you need to provide is solder and tools! Uses 9 volt battery which is not included.
More Details
$43.95
Tube Complement for Vox AC30H2, HH
Tube Complement for Vox AC30H2, HH Includes: (1) T-5AR4-JJ · (1) T-EF806S-JJ · (4) T-EL84-JJ · (3) T-12AX7-S-JJ · More...
More Details
$114.65
$108.92
Kit - Persuader Deluxe Pedal Kit, MOD DIY
The Persuader Deluxe utilizes a Darlington preamp to push cascaded triode vacuum tubes into distortion. Four dual triode vacuum tubes are included with each kit (JJ 5751, 12AX7B China, JJ 12AU7 and a NOS USA made 12AT7). Swap to create a wide range of tones from just a hint of break up from the JJ 5751 to over the top crunchy distortion using the NOS US made 12AT7. A boost switch provides an additional layer of flexibility with added gain and a little extra bottom end. An LED indicator lights up when the Persuader Deluxe is engaged and not in true bypass mode.
More Details
$99.95
Tube Complement for Vox AC100CPH
Tube Complement for Vox AC100CPH Includes: (4) T-EL34-JJ · (4) T-12AX7-S-JJ · More...
More Details
$99.80
$94.81
Tube Complement for Vox V9159 Cambridge 15
Tube Complement for Vox V9159 Cambridge 15 Includes: (1) T-12AX7-S-JJ
More Details
$9.85
$9.36
Effects Pedal - Dunlop, JDF2 Dallas Arbiter Fuzz Face
Built to the exact specifications of the Original Dallas-Arbiter Fuzz Face. Ruggedly constructed to the original vintage specs. The classic fuzz box used by legendary rockers of the 60s and 70s.
More Details
$129.99
Tube Complement for Vox AC30HW AC30HWH
Tube Complement for Vox AC30HW AC30HWH Includes: (1) T-5AR4-JJ · (4) T-EL84-JJ · (5) T-12AX7-S-JJ · More...
More Details
$109.55
$104.07
Tube Complement for Vox AC15CC1 & AC15CC1X
Tube Complement for Vox AC15CC1 & AC15CC1X Includes: (2) T-EL84-JJ · (2) T-12AX7-S-JJ · More...
More Details
$42.30
$40.19
Effects Pedal - MG Music, Fuzzyland, Fuzz Pedal
Hendrix’s Eletric Ladyland LP was our main influence when creating this pedal, we wanted our fuzz to have the tone as close as possible from the one used by Hendrix, and we got pretty close! Fuzzyland is a positive ground fuzz with a pair of the good old germanium Mullard AC 128. Volume and gain is all you need and if you turn the volume down in your guitar you’ll find many other tones.
More Details
$195.00
Kit - The Contortionist, Limited Edition High Octane Fuzz Box
The Contortionist kit is a limited edition, all analog, high octane fuzz box. It produces fuzz with layered octave overtones similar to those produced by an electronic-bow. The frequency multiplier circuitry creates harmonics that swell and recede depending on gain setting, pick attack, neck position and pickup. This is a high gain circuit that can put out up to 2 volts and will provide ample amounts of sustain.
More Details
$39.95
Kit - The Ring Resonator Pedal Kit, MOD DIY
The Ring Resonator is the newest member of the MOD Kits DIY family. Order now to be one of the first people to get this new octave up fuzz pedal! The Ring Resonator kit is an octave up fuzz effect that is an all analog design that captures those late 60s octave up fuzz tones. Transformer coupled germanium diodes produce sounds that range from a subtle octave up to thick, harmonically rich sonic textures and synth-like tones. Experimenting with different pickups and tone control settings on your guitar with the Ring Resonator can also produce sitar-like sounds.
More Details
$64.95
Effects Pedal - Maxon Vintage, AD999 Analog Delay
Just when you thought you'd have to go digital, Maxon unveils the new AD999 Analog Delay. The newest member of the highly touted Maxon Vintage Series, the AD999 is the most ambitious and practical analog delay pedal to come along in ... well, ever!
More Details
$337.50
Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware
More Details
$40.00
Battery Holder - 4 "AA" Cells
Battery holder for four AA cells. Overall Outer Length x Width = 4 3/16" x 1
More Details
$0.20
Gear - For Wah Pot
Gear for potentiometers in wah pedals.
More Details
$1.50
Kit - The Tea Philter Pedal Kit
The Tea Philter - A T-Filter Pedal Kit The Tea Philter pedal produces a fixed wah tone allowing you to lock it in without rocking the pedal back and forth. Every guitar/wah combination has a certain sweet spot that is perfect for lead and chord work. The Tea Philter lets you dial in everything from your favorite vocal mid-range tone to thick lows. Using point-to-point wiring and easy-to-follow instructions you can have a working fixed wah pedal in a matter of hours.
More Details
$31.95
Kit - The Wahtz Wah Pedal Kit
The Wahtz Wah Pedal Kit produces the classic Wah tone you've come expect with a hint of extra bite and growl. True bypass switching insures no loss of signal when the Wah effect is not engaged; and the long life potentiometer manufactured specifically for use in Wah pedals is included to provide years of smooth, quiet operation. Point to point construction allows advanced kit builders to easily experiment with modifications to further tailor the tone to more individual tastes.
More Details
$99.95
  • Sort:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • View All (15 pages)