Guitar Parts & Pickups

Vibramate Standard V5 Adapter Mounting Kit, For Bigsby B5, Aluminum Now you can install a Bigsby Vibrato on your guitar without drilling any holes!

Clip nut for 8/32" thread. For use with machine screws

Kent Armstrong “Slimbucker” jazz pickup with slim profile (3/8" thick), side-mount configuration. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited.

Precision Music Technologies V-Treb with 500KA CTS pot – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Pot: 24 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/4”. PCB dimentions: 1.06” x 0.46” x 0.07”

Genuine Gretsch® screws for mounting Gretsch pickup rings to the guitar's body. These chrome oval-head wood screws come in a pack of 12.
Accessory to P-PUGRETMR-S

Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.

Gold anodized aluminum Telecaster style pickguard with 8 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.

Genuine Bigby bridge for Guild Special Archtop guitars. This bridge has a 2-1/16" string spacing with a 3” stud spacing.

Genuine Bigsby® flat handle assembly for use with Bigsby vibrato units. The is the stock handle assembly to the Kalamazoo series vibratos. This unit attaches to vibratos using the included set screw.

Includes:

• (1) P-GB5-A
• (1) P-GV5-A

This is a complete set that includes an original Bigsby B5 and a matching Vibramate V5-ST Short Tail for use with most traditional style guitars that have a tune-o-matic style bridge and a stop-tailpiece.

Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included. For 5-string bass. 2 Left, 3 Right.

Direct Drop-in compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's Res-O-Lite machine heads are extremely light weight (59.2 grams each) from aluminum alloy to make for a less neck heavy bass. Features a 26:1 Gear Ratio. 2+2 config, fits many Standard American and Mexican basses. Also the key post can be removed and replaced on opposing side.Comes in 2+2 configuration. Mounting hardware included.

The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:

• Length - 1.89 in. (48.01mm)
• Width - 0.226 in. (5.74mm)
• Height - 0.42 in. (10.67mm)

ResoMax NV tailpiece is made from Graphtech’s lightweight, high-strength Resomax material that will increase harmonic content and leave your guitar dripping with tone. This is a great option to upgrade or replace the existing tailpiece on any electric guitar that currently has a standard tune-o-matic bridge and tailpiece combo. Equipped with AutoLock, this tailpiece magnetically locks the bridge to the body of the guitar without a tool making restringing a breeze. Graphtech’s Resomax tailpieces ship with metric posts and bushings. Please see the measurement guide to verify compatibility.

The PRL-8341 are a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that use 3 x 3 tuners, such as Gibson style and PRS style guitars. A great upgrade over single gear machine heads, such as Grover, Schaller, Sperzel, Kluson, etc. This set has keystone style knobs. The tuners have a two pin casing that can be used as is, or with Graphtech’s Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. RATIO® is Graphtech’s patented gear technology. RATIO® Calibrated Machine Heads incorporate different string gauges into the tuning equation.

• From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.

Graphtech balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half turn is a semitone.

The 505FV series design allows you to upgrade your vintage Fender® tuners to a more modern style locking tuner without making ANY modifications to your guitar. The overlapping ear design allows you to utilize the existing screw holes and the use of push in bushings, rather than screw in, means no modifications have to be made to the post holes. These inline tuners feature the famous 18:1 ratio and thumb screw locking mechanism.

The 8501 model is the perfect option to upgrade or replace the existing saddles on your Gibson Nashville Tune-O-Matic bridge dated after 2000. It will also fit in a TonePros TP6 bridge and any Tune-O-Matic bridges marked PW on the underside. These are the saddles Graphtech loads into our ResoMax NV2 Bridges and bridges with API stamped on the bottom! They are a drop-in replacement set to make for an easy install. Please note: engineered for maximum vibration transfer, TUSQ saddles for electric guitars will add rich bell-like highs and big open lows. Switching to TUSQ Tune-O-Matic saddles will add some "spank" to your tone. String Saver saddles are made with a unique combination of materials made to enhance tone and dramatically reduce string breakage.

Tremolo bridge assembly for use on most American and American Standard series Stratocaster models manufactured from 1986-2007. Six powder-coated steel block saddles with off-center intonation screws, screw-in tremolo arm with white tip, mounting hardware and adjustment wrenches included. Features:

• Six powder-coated steel block saddles with off-center intonation screws
• Screw-in tremolo arm with white tip included
• Mounting hardware and adjustment wrenches included
• 2-7/32" (2.220") mounting and modern 2 1/16” (2.0625”) string spacing
• Used on American and American Standard series Stratocaster models (1986-2007)

Locking tuners with a chrome, satin finish that provides a sleek, modern look and is less susceptible to fingerprints and blemishes. Package of 6 in a line.

Genuine Fender® made in USA neck plate for American 4 bolt American Standard bass guitars. This neck plate features the Fender® logo along with Corona, California.

Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.

Now you can install your original model Bigsby Fender F logo vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for the original F logo Bigsby B5 vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The Vibramate V5-TEV Stage II kit includes mounting hardware for the Bigsby original F logo B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles. There is no need for drilling, soldering or removing the neck. The Vibramate V5-TEV Stage II automatically positions the Bigsby Vibrato, neck pickup, and bridge saddles in the proper orientation ensuring a clean, finished appearance with great performance.