Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Control plate - Fender®, for Standard J-Bass, Chrome
Colors Available:
Original Fender® replacement for standard J Bass, 4-Hole. Fits most U.S. and Mexico-made Jazz Bass® models manufactured from 1964-present. Mounting screws included.
Starting at $15.65
Pickup - Kent Armstrong, Classic Single, Vintage Strat
This is an ultra sweet sounding, low output-pickup. The vintage single coil specifications offer a tight, balanced low end response and sweet chimey highs. If you are looking for a true vintage tone that ISN'T modified to sound like a 60 year old pickup, this is an excellent upgrade. Great for blues and classic old school funk applications. Staggered Alnico polepieces. Standard polarity. White Cover
  • D.C. resistance = 6.5K
  • Magnet Type = Alnico 5
  • Magnet dimensions: 5mm X 17mm polepieces
$37.45
Potentiometer - PMT, Audio, Variable Treble Bleed, ¾"
Precision Music Technologies V-Treb with 500KA CTS pot – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Pot: 24 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/4”. PCB dimentions: 1.06” x 0.46” x 0.07”
$17.95
Keeper Bar - 10 Hole, 50mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.
$4.35
Pickguard - J-Bass, 3-Ply, 10 hole
Colors Available:
Three-ply Jazz Bass® style pickguards with 10 mounting holes. This pickguard is routed for a standard J-Bass style pickup and wiring configuration. All mounting holes are countersunk.
$15.95
Bridge - Bigsby, for Guild Special Archtop
Colors Available:
Genuine Bigby bridge for Guild Special Archtop guitars. This bridge has a 2-1/16" string spacing with a 3” stud spacing.
$69.95
Handle - Bigsby, flat handle assembly
Colors Available:
Genuine Bigsby® flat handle assembly for use with Bigsby vibrato units. The is the stock handle assembly to the Kalamazoo series vibratos. This unit attaches to vibratos using the included set screw.
Starting at $54.95
Vibrato - Bigsby, B3, for Thin Hollow and Semi-Hollow, Left-Handed
This is the left-handed version of the Bigsby B3 designed for use on thin electric hollow and semi-hollow guitars. Mounting screws, arm spring, and washer included.
$199.99
Vibrato - Bigsby, B30, for thin hollow and semi-hollow guitars
Colors Available:
Designed for use on thin hollow body and semi-hollowbody guitars. Bigsby B30 Specifications
  • Model Name: B-30
  • Series: Licensed Line
  • Manufacturing Method: Die Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 296 grams/10.4 oz.
  • Overall Length: 7 ½"/190.5 mm
  • Overall Width: 3 ¾"/95.3 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench
Starting at $139.99
Note: P-GB30-G: Gold is a special order item.
$202.94
Vibrato - Bigsby, B6, for large hollow-body guitars, left-handed
Colors Available:
Designed for use on thin hollow body and semi-hollowbody guitars. Left-handed.
Starting at $199.99
Note: P-GB6-GLH: Gold is a special order item.
Vibrato - Bigsby Vibramate Set, B5 / V5-ST, aluminum
This is a complete set that includes an original Bigsby B5 and a matching Vibramate V5-ST Short Tail for use with most traditional style guitars that have a tune-o-matic style bridge and a stop-tailpiece.
$204.94
Tuners - Gotoh, GB707, Compact for Bass, chrome, 2+3
Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included. For 5-string bass. 2 Left, 3 Right.
$46.85
package of 5
Tuners - Gotoh, SD510, gold, round knobs, 3 per side
Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD510 series solves these problems by combining “Rock-solid"™ technology and the post collar or: “self-center guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD510 series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through it is use of the ideal materials selected for each component part you also obtain a far superior sound. 1:15 gear ratio.
$64.95
package of 6
Nut - Tusq , Pre-shaped Blank, Acoustic, Martin Style
The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:
  • Length - 1.89 in. (48.01mm)
  • Width - 0.226 in. (5.74mm)
  • Height - 0.42 in. (10.67mm)
$12.75
Tailpiece - Graphtech, ResoMax NV, AutoLock
Colors Available:
ResoMax NV tailpiece is made from Graphtech’s lightweight, high-strength Resomax material that will increase harmonic content and leave your guitar dripping with tone. This is a great option to upgrade or replace the existing tailpiece on any electric guitar that currently has a standard tune-o-matic bridge and tailpiece combo. Equipped with AutoLock, this tailpiece magnetically locks the bridge to the body of the guitar without a tool making restringing a breeze. Graphtech’s Resomax tailpieces ship with metric posts and bushings. Please see the measurement guide to verify compatibility.
$60.73
Tuners - Ratio by Graphtech, Locking, Oval, 6-in-line, Chrome
The PRL-8731 are a right-handed set of Locking RATIO® Calibrated Machine Heads for electric guitars that use 6-in-line tuners. This set has oval style knobs. The tuners have a two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are included to make installation on most guitars fast and accurate by using your existing screw mounting holes. RATIO® is Graphtech’s patented gear technology. RATIO® Calibrated Machine Heads incorporate different string gauges into the tuning equation.
  • From Low E to High E 39:1, 24:1, 20:1, 35:1, 20:1, 12:1.

Graphtech balanced the gear ratios to each string simplifying the tuning process. With RATIO®, a half turn is a semitone. Every string reacts the same to any tuning adjustment.
$125.95
Bridge Saddles - String Saver by Graphtech, 8501, for Post-2000 Gibson Nashville Tune-O-Matic
The 8501 model is the perfect option to upgrade or replace the existing saddles on your Gibson Nashville Tune-O-Matic bridge dated after 2000. It will also fit in a TonePros TP6 bridge and any Tune-O-Matic bridges marked PW on the underside. These are the saddles Graphtech loads into our ResoMax NV2 Bridges and bridges with API stamped on the bottom! They are a drop-in replacement set to make for an easy install. Please note: engineered for maximum vibration transfer, TUSQ saddles for electric guitars will add rich bell-like highs and big open lows. Switching to TUSQ Tune-O-Matic saddles will add some "spank" to your tone. String Saver saddles are made with a unique combination of materials made to enhance tone and dramatically reduce string breakage.
$37.36
Bridge - Fender®, American Series, Strat Tremolo Assembly
Tremolo bridge assembly for use on most American and American Standard series Stratocaster models manufactured from 1986-2007. Six powder-coated steel block saddles with off-center intonation screws, screw-in tremolo arm with white tip, mounting hardware and adjustment wrenches included. Features:
  • Six powder-coated steel block saddles with off-center intonation screws
  • Screw-in tremolo arm with white tip included
  • Mounting hardware and adjustment wrenches included
  • 2-7/32" (2.220") mounting and modern 2 1/16” (2.0625”) string spacing
  • Used on American and American Standard series Stratocaster models (1986-2007)
$100.95
Tuners - Fender, Locking Tuners, 6 in line, satin chrome
Locking tuners with a chrome, satin finish that provides a sleek, modern look and is less susceptible to fingerprints and blemishes. Package of 6 in a line.
$85.95
package of 6
Neck Plate - Fender®, for American Standard Bass, Chrome
Genuine Fender® made in USA neck plate for American 4 bolt American Standard bass guitars. This neck plate features the Fender® logo along with Corona, California.
$17.50
Tuners - Sealed, 45° Screw Mount, Oval Knob, 3 per side
Sealed diecast tuning machine set with a standard 45° mounting screw and solid metal oval buttons. This chrome finished configuration looks classic on both electric and acoustic guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.
$23.95
Vibramate - V5 JAM Mounting, For Jazzmaster and Jaguar
Colors Available:
Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.
Starting at $34.58
Adaptor Kit - Vibramate, V5 Stage II Vintage Telecaster, F Logo
Now you can install your original model Bigsby Fender F logo vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for the original F logo Bigsby B5 vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The Vibramate V5-TEV Stage II kit includes mounting hardware for the Bigsby original F logo B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles. There is no need for drilling, soldering or removing the neck. The Vibramate V5-TEV Stage II automatically positions the Bigsby Vibrato, neck pickup, and bridge saddles in the proper orientation ensuring a clean, finished appearance with great performance.
$99.95