Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Nut - Plastic, for Electric Guitars
Plastic electric guitar nut.
$1.95
Nut - Plastic construction, for Stratocaster
Stratocaster guitar nut - plastic construction
$1.95
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
Nut - Bone, for Acoustic, 45mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.
  • Measures 45mm x 10mm x 4.95mm
  • Sold individually
$4.25
Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 56 mm x 11 mm x 6.35 mm
  • Sold individually
$4.25
Nut - Bone, for Acoustic, 52.5mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 52.5mm x 10mm x 4.95mm
  • Sold individually
$4.25
Nut - Graphite, for Fender, blank unslotted
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.95
Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
Nut blanks - Fender®, melamine, set of 2
Set of two Fender® high-quality melamine (simulated bone) string nuts with 9.5" radius, for use with most Fender instruments
$5.55
package of 2
Nut - Brass, for Fender, blank un-slotted
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
$6.50
Nut - Fender®, replacement for American standard P-Bass
High-quality Micarta (synthetic bone) pre-slotted string nut for use on American Standard Precision Bass and other U.S.- and Mexico-made basses with 9.5"-radius fingerboards.
$7.25
Nut - Fender®, Pre-slotted, Melamine, for Tele and Strat
Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.
$8.45
Nut - Tusq, Pre-slotted, Strat and Tele Style, Flat Bottom
The PQ-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions: Length - 1.653 in. (41.98mm) Width - 0.126 in. (3.22mm) Height - 0.196 in. (4.98mm) E to E - 1.388 in. (35.25mm)
$10.95
Nut - Tusq XL, ¼” Slab, 63.5mm x 6.35mm x 11.1mm
The 4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a ¼" thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 2.5 in. (63.5mm)
  • Width - 0.25 in. (6.35mm)
  • Height - 0.437 in. (11.1mm)
Starting at $11.95
Nut - Tusq XL, Pre-slotted, Strat and Tele Style
The 5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design. The 5000-00 nuts have a 9.5 in. radius This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 1.687 in. (42.85mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.198 in. (5.03mm)
  • E to E - 1.39 in. (35.31mm)
  • Radius - 9.5 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-1.
Starting at $11.95
Nut - Tusq , Pre-slotted, Acoustic, Martin Style, 1 3/4”
The PQ-M644-00 is the perfect option to replace and upgrade the nut on your Martin style acoustic guitar. It has an angled bottom and comes pre-slotted to make for a quick and easy install. Dimensions:
  • Length - 1.745 in. (44.32mm)
  • Width - 0.224 in. (5.69mm)
  • Height - 0.361 in. (9.17mm)
  • E to E - 1.418 in. (36.02mm)
$12.75
Nut - Tusq , Pre-shaped Blank, Acoustic, Martin Style
The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:
  • Length - 1.89 in. (48.01mm)
  • Width - 0.226 in. (5.74mm)
  • Height - 0.42 in. (10.67mm)
$12.75
Nut - Tusq XL, 3/16” Slab, 63.5mm x 4.75mm x 11.1mm
The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16” thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 2.5 in. (63.5mm)
  • Width - 0.187 in. (4.75mm)
  • Height - 0.437 in. (11.1mm)
Starting at $12.75
Nut - Tusq XL, Pre-slotted, Gibson Post 2014
The PQL-6011-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made post-2014. It is slightly taller than the P-GNUT-TUSQ-EPS-3XL (pre 2015). When in doubt, use this one, you can always sand the bottom of the nut to adjust lower.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.725 in. (43.83mm)
  • Width - 0.185 in. (4.69mm)
  • Height - 0.405 in. (10.30mm)
  • E to E - 1.408 in. (35.77mm)
Starting at $12.77
Nut - Tusq XL, Pre-slotted, Strat and Tele Style, Flat Bottom, Black
The PT-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions:
  • Length - 1.652 in. (41.98mm)
  • Width - 0.126 in. (3.22mm)
  • Height - 0.196 in. (4.98mm)
  • E to E - 1.388 in. (35.25mm)
  • Radius - 12 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-6. For a similar nut that works on curved and flat Fender style necks, see P-GNUT-TUSQ-EPS-1XL-X.
$12.77
Nut - Tusq XL, Pre-slotted, Epiphone Pre 2014
The 6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 1.730 in. (43.94mm)
  • Width - 0.243 in. (6.16mm)
  • Height - 0.357 in. (9.08mm)
  • E to E - 1.344 in. (34.14mm)
  • Radius - 15 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-5.
Starting at $12.77