Products
No product page found for product resistors.
Showing search results for resistors
Showing results for resistor. Search instead for resistors
Amp Kit - Mod® Electronics, MOD102+ guitar amp
The Mod® Electronics MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with added additional “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.
$315.00
Amp Kit - Mod® Electronics, MOD102 guitar amplifier
The Mod® Electronics MOD 102 is a great place to start for those interested in building their own tube amp. It is based on a classic American tube-circuit design combined with a British style Class A output tube section. At low volume it produces a clean chimey tone that moves into smooth overdrive at higher volumes. All parts are included along with a pre-drilled steel chassis, wire and tubes (1 EL84 and 1 12AX7). Puts out at least 5 watts. The chassis layout is open for easy assembly using the clear, easy to follow instructions.
$279.00
Resistor Kit - 0.5 Watt, Carbon Composition, 5 of each value
Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types.
$165.60
Save 40%
Originally: $276.00
package of 390
Out of Stock
Resistor Kit - 2 Watt, Metal Oxide, Power, 5 of each value
Metal Oxide resistors are for applications where stability under high temperature conditions is required.
Resistance Values (5 each) .47 1 2 2.4 2.7 3.3 4.7 5.1 6.8 8.2 10 12 15 20 22 27 30 39 47 51 68 82 100 110 120 150 180 200 220 240 270 300 330 390 470 510 560 680 750 820 1k 1.1k 1.2k 1.5k 1.6k 1.8k 2k 2.2k
- 2 watt
- ± 5% tolerance
- -55° C to 240° C operating range (derated over 70° C)
- 350 V working, 600 V overload
- Excellent flame retardant coating
- Stable performance in diverse conditions
- High purity ceramic core
- EIA color coded
- .57" long x .20" diameter
Resistance Values (5 each) .47 1 2 2.4 2.7 3.3 4.7 5.1 6.8 8.2 10 12 15 20 22 27 30 39 47 51 68 82 100 110 120 150 180 200 220 240 270 300 330 390 470 510 560 680 750 820 1k 1.1k 1.2k 1.5k 1.6k 1.8k 2k 2.2k
$150.48
Save 40%
Originally: $250.80
package of 440
Resistor Kit - 1 Watt, Metal Oxide, Power, 5 of each value
Metal Oxide resistors are for applications where stability under high temperature conditions is required.
Resistance Values (5 each) .47 1 2 2.4 2.7 3.3 4.7 5.1 6.8 8.2 10 12
- 1 watt
- ± 5% tolerance
- -55° C to 240° C operating range (derated over 70° C)
- 350 V working, 600 V overload
- Excellent flame retardant coating
- Stable performance in diverse conditions
- High purity ceramic core
- EIA color coded
- .47" long x .20" diameter
Resistance Values (5 each) .47 1 2 2.4 2.7 3.3 4.7 5.1 6.8 8.2 10 12
$113.16
Save 40%
Originally: $188.60
package of 410
Resistor Kit - 1 Watt, Carbon Film, 5 of each value
Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop.
- 1 Watt 500V working, 1000V overload, 0.5" long by 0.14" dia.
- High stability, low noise, moisture stable.
- EIA color coded.
$109.20
Save 40%
Originally: $182.00
package of 455
Resistor Kit - 0.5 Watt, Metal Film, 5 of each value
Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate.
$82.80
Save 40%
Originally: $138.00
package of 345
Resistor Kit - ¼ Watt, Metal Film, 1% tolerance, 5 of each value
Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet.
$76.05
package of 845
Resistor Kit - 0.5 Watt, Carbon Film, 5 of each value
Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop.
- ½" watt - 350V working, 700V overload, 0.4" long by 0.14" dia.
- High stability, low noise, moisture stable.
- EIA color coded.
$70.49
Save 40%
Originally: $117.48
package of 445
Parts Kit - MKIII / MKIV Fuzz Pedal, Premium Build
PCB and parts kit for the MKIII / MKIV fuzz. This kit includes all of the resistors, capacitors, diodes, potentiometers, and terminal pins used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
Starting at $63.61
Parts Kit - Zonk Machine, PCB Version, Premium Build
PCB and parts kit for the Zonk Machine. This is based on the original PCB version. This kit includes all of the resistors and capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$62.69
Parts Kit - Eyelet-Rite Fuzz Pedal, Germanium Version, Premium Build
Parts Kit - Eyelet-Rite Fuzz Pedal, Germanium Version, Premium Build PCB and parts kit for the Eyelet-Rite fuzz pedal. This is based on the point to point version of the germanium Mosrite Fuzzrite pedal. This kit includes all of the resistors, capacitors, eyelets, and the footswitch used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$61.47
Parts Kit - MKII Fuzz Pedal, Stripboard Professional Version, Premium Build
PCB and parts kit for the MKII fuzz pedal. This is based on the classic stripboard Tone Bender Professional. This stipboard fuzz circuit was also used in some versions of the Supa Fuzz as well as some other fuzz pedals. This kit includes all of the resistors, capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
Starting at $58.23
Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
$59.95
Parts Kit - V828 Italian Fuzz Pedal, PCB Version, Premium Build
PCB and parts kit for the V828 fuzz pedal. This is based on the classic Italian-made V828 Tone Bender. These were also sold under the Jen brand. This kit includes all of the resistors, capacitors, and solder tags used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$55.02
Parts Kit - Iss 2 Fuzz Pedal, BC108 style, Premium Build
PCB and parts kit for the Iss 2 fuzz built in the style of a BC108 Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC108 style parts kit, a pair of BC108C transistors are included.
$51.52
Parts Kit - Iss 2 Fuzz Pedal, BC183KA style, Premium Build
PCB and parts kit for the Iss 2 fuzz built in the style of a BC183KA Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC183KA style parts kit, a pair of BC183A transistors are included.
$51.48
Parts Kit - Iss 1 Fuzz Pedal, Standard Version, Premium Build
PCB and parts kit for the Iss 1 fuzz built in the style of the standard germanium Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$50.10
Choke - One Electron, Audio, PRC-3, 225H for Preamp Output
The PRC-3 audio choke from One Electron was designed as a plate load for the output of either a high quality line amplifier or a phono preamp.
$49.95
Parts Kit - Supa Fuzz Pedal, PCB Version, Premium Build
PCB and parts kit for the Supa Fuzz. This is based on the classic PCB version produced by Marshall. This kit includes all of the resistors and capacitors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$49.70
LiteIIB 18W Kit - Scratch Build Parts
GuitarAmplifierPCBs.com 18 Watt LiteIIb "Baby Will" Parts List for Scratch Build The Baby Will is a PCB simplified version of the legendary Marshall 18 Watt 1974x circuit. The circuit we laid out on a circuit board is known as the LiteIIb. It's capable of tone from clean jazz, crunchy blues, to raunchy classic rock. Crank up the volume and you'll be in AC/DC Back In Black heaven. The magic of the LiteIIb is its simplicity.
$48.42
package of 22
Parts Kit - HS Treble Booster Pedal, Si Version, Premium Build
PCB and parts kit for the HS Treble Booster. This is based on the more common silicon version that used a 2N4061 transistor. This kit includes all of the resistors, and capacitors used on the included circuit board. A 2N4061 transistor is included. In addition to the PCB parts, a footswitch, jacks, battery snap, and ground lug are all included in this parts kit.
$48.11
LiteIIB 18W Kit - Valve Junior Conversion Parts
Convert your Epiphone Valve Jr. into a Lite IIb 18 Watt amp using the "Baby Will" kit. The Baby Will is a PCB simplified version of the legendary Marshall 18 Watt 1974x circuit. The circuit laid out on a circuit board is known as the LiteIIb. It's capable of tone from clean jazz, crunchy blues, to raunchy classic rock. Crank up the volume and you'll be in AC/DC Back In Black heaven
$35.17
package of 20
Vacuum Tube - 6973, Electro-Harmonix
Electro-Harmonix 6973 Power Tube Beam power amplifier used in vintage Gretsch and Magnatone amplifiers. This is a real 6973, not a rebrand of a "close" tube.
Starting at $34.95