Products
No product page found for product resistors.
Showing search results for resistors
Showing results for resistor. Search instead for resistors
Resistor - Carbon Film, Zero Ohm
Zero ohm (0Ω) resistors in a carbon film axial package. These resistors are a similar size to most common 1/4W carbon film and metal film resistors. Zero ohm resistors are useful as pcb jumpers as well as point to point jumpers. These can also be useful for true bypass 3PDT wiring.
$0.45
package of 5
Resistors - ⅛ Watt, Metal Film, 1% tolerance
Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. These 1/8W resistors have a very small body and are great for tight builds.
Resistors - ¼ Watt, Carbon Film, 5% tolerance
Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Package of 5. These resistors are perfect for pedal builders!
- 1/4 watt
- ± 5% tolerance
- EIA color coded
- .24" long x .08" diameter
- Package of 5
Resistors - ¼ Watt, Metal Film, 1% tolerance
Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Package of 5. These resistors are perfect for pedal builders! 1/4 watt.
Regulator - L78L33, 3.3 Volt, Positive Voltage Regulator, TO-92
L78L33 3.3V regulator in a TO-92 package. The L78L33 three-terminal 3.3V positive regulator employs internal current limiting and thermal shutdown, making them essentially indestructible. If adequate heat-sink is provided, they can deliver up to 100 mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or oncard regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The L78L series used as Zener diode/resistor combination replacement, offers e improvement along with lower quiescent current and lower noise. Features:
- Output voltage of 3.3V
- Output current up to 100 mA
- Short-circuit protection
- No external components are required
$0.59
Resistor - 3 Watt, Cemented Wirewound, 5% tolerance, 470Ω
High quality, reduced mass cemented wirewound 3W 470Ω resistors. These durable resistors are the perfect choice for screen grid resistors due to their reduced size and weight compared to ceramic wirewound resistors. Sold individually.
- 3 watt
- ±5% tolerance
- 13mm long by 4.8mm dia.
- 0.75g
$0.69
Resistor - 5 Watt, Cemented Wirewound, 5% tolerance, 1KΩ
High quality reduced mass cemented wirewound 5W 1KΩ resistors. These durable resistors are the perfect choice for screen grid resistors due to their reduced size and weight compared to ceramic wirewound resistors. Sold individually.
- 5 watt
- ±5% tolerance
- 18mm long by 7.5mm dia.
- 1.90g
$0.95
PCB - Daughterboard for Wiring 3PDT Footswitches
Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.
$0.95
LED with Bezel - Cone Shape, Prewired
Prewired cone-shaped LED bezel. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and lock washer included.
Colors Available:
$1.10
LED Bezel - Cup Shape, Prewired, Red LED
Prewired cup-shaped LED bezel with a red LED. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12V. Mounting nut and lock washer included.
$1.15
CMOS - CD4047, Low-Power Monostable/Astable Multivibrator, 14-Pin DIP
CD4047B consists of a gatable astable multivibrator with logic techniques incorporated to permit positive or negative edge-triggered monostable multivibrator action with retriggering and external counting options. Inputs include +TRIGGER, -TRIGGER, ASTABLE, ASTABLE\, RETRIGGER, and EXTERNAL RESET. Buffered outputs are Q\, Q and OSCILLATOR. In all modes of operation, and external capacitor must be connected between C-Timing and RC-Common terminal, and an external resistor must be connected between the R-Timing and RC-Common terminals. Astable operation is enabled by a high level on the STABLE input or a low level on the ASTABLE\ input, or both. The period of the square wave at the Q and Q\ Outputs in this mode off operation is a function of the external components employed. "True" input pulses on the ASTABLE input or "Complement" pulses on the ASTABLE\ input allow the circuit to be used as a gatable multivibrator.
$1.15
Resistors - 5 Watt, Wirewound, Power, 5% tolerance
Wire Wound power resistors are made by wrapping a length of high resistance wire onto an insulating form. Ceramic flame retardant package. Exceptionally small, sturdy and reliable. 5 watt.
Resistors - 0.5 Watt, Carbon Film, 5% tolerance
Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Sold in multiples of 5. ½" watt - 350V working, 700V overload, 0.4" long by 0.14" dia.
LED with Bezel - Low Profile, Prewired, Diffused LED, Steel
Prewired steel low-profile LED bezel with a diffused LED. With a 0.061” height, this steel LED bezel has an almost flush appearance on the panel it’s mounted to. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and rubber o-ring included.
Colors Available:
$1.45
LED with Bezel - Low Profile, Prewired, Diffused LED, black metal
Prewired low-profile LED bezel with a diffused LED. With a 0.07” height, this black metal LED bezel has an almost flush appearance on the panel it’s mounted to. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and rubber o-ring included.
Colors Available:
$1.50
Resistor - W20 Series, Welwyn, 3 Watt, Wirewound
High quality W21 resistors from Welwyn / TT Electronics W20 Series. These 3W wirewound resistors are a great choice for screen grid and cathode bias resistors in tube amplifiers. The brown enamel coating used by Welyn looks great in vintage and vintage-style amps. These resistors can be found in many vintage Marshall amplifiers. A high purity ceramic substrate is assembled with interference fit end caps to which are welded the termination wires.
$1.55
Resistors - 10 Watt, Wirewound, Power, 5% tolerance
Wire Wound power resistors are made by wrapping a length of high resistance wire onto an insulating form. Ceramic flame retardant package. Exceptionally small, sturdy and reliable. 10 watt.
Resistor - 23 Series, Ohmite, 3 Watt, 470Ω, Wirewound
High quality 23 Series resistors from Ohmite. These 470Ω 3W wirewound resistors are a great choice for screen grid and cathode bias resistors in tube amplifiers. The brown enamel coating used by Ohmite looks great in vintage and vintage-style amps.
The 23 Series axial terminal resistors are both durable and economical.
The 23 Series axial terminal resistors are both durable and economical.
$1.69
Audio Power Amplifier - LM386N-1 / 4, Low Voltage
LM386 Low Voltage Audio Power Amplifier The LM386 is a mono low voltage amplifier that can be used in a variety of applications. It can drive loads from 4 Ω to 32 Ω. The gain is internally set to 20 but it can be modified from 20 to 200 by placing a resistor and capacitor between pins 1 and 8. As this is an Op Amp it can be used in different configurations to fit in several applications. The internal gain setting resistor allows the LM386 to be used in a very low part count system. In addition a series resistor can be placed between pins 1 and 5 to modify the gain and frequency response for specific applications. These are found in many small audio amplifiers and even tiny pedal sized guitar amplifiers! There are tons of possibilities for this little Op Amp.
$1.70
Thermistor - PTC, 132V, 50Ω
Radial-lead PTC thermistor often used to protect sensitive components from overcurrent damage. This thermistor is 50Ω±20% at 25˚C.
$1.75
Resistor - W20 Series, Welwyn, 7 Watt, Wirewound
High quality W22 resistors from Welwyn / TT Electronics W20 Series. These 7W wirewound resistors are a great choice for screen grid and cathode bias resistors in tube amplifiers. The brown enamel coating used by Welyn looks great in vintage and vintage-style amps. These resistors can be found in many vintage Marshall amplifiers. A high purity ceramic substrate is assembled with interference fit end caps to which are welded the termination wires.
$1.79
Resistor - PR01, Vishay BC, 1 Watt, Power Metal Film
High quality metal film resistors from Vishay / BC Components. PR01 resistors are rated for 1W but have a compact 2.5x8mm package. These resistors look great in vintage and vintage-style builds and have been used in high-end Marshall amplifiers and other audio equipment. Construction: A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents.
$1.95
package of 5
Dial Lamp - NE51, T-3-¼, 90/110V, .0003A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
$1.95
Resistors - 1 Watt, Carbon Film, 5% tolerance
Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Sold in multiples of 5. ±5% tolerance. 1 watt