Speakers & Components

The N12K was developed in conjunction with Fender® as the speaker for the new Fender® Tone Master™ Deluxe Reverb® and Twin Reverb®. It delivers the closest sound, character and dynamic feel of the classic Jensen C12K with half the weight, thanks to the exclusive Jensen Neodymium magnet design (the same magnet used in the Tornado series). The N12K delivers a warm, full bodied tone with remarkable headroom and just the right amount of brilliance and sparkle.

The high power 10” Alnico in the Vintage Series, the P10Q was used in a handful of beautifully sounding amps such as the Tweed Super, Brownface Super, and others. This speaks to the fierce tone of the P10Q, capable of great clarity, detailed tone with excellent trebles, and well supported by a solid mid and bass foundation.

The P10R is very important in the history of Jensen speakers. Its shimmering, yet throaty and vibrant tone is one of the signatures of the Tweed era and inspired the start-up of the British tones. It was the first speaker reissued by Jensen, presented to a restricted panel of partners at the 1999 Summer NAMM show. The P10R is the speaker that contributed to the magical tone of the 4x10 Bassman® Tweed amps, the 4x10 Super Tweed Amps and the equally mythical 3x10 Bandmaster® amps.

Not a strict reissue, the P10R-F was born as a special edition of the P10R, developed in cooperation with Fender®, for the Custom Shop ’57 BandMasterä and the 20th Anniversary Vibro-Kingä amps. By means of a different cone membrane, the P10R-F has a warmer, ‘aged’ tone, and breaks up in a sweet, progressive manner. A very unique speaker for true Tone-Connoiseurs.

The AlNiCo P12N is surely one of the most iconic Jensen speakers of the late ‘50s. Visually impressive because of the big bell cover on the magnet, it is the highest powered 12” speaker in the range. Among others, the P12N was used in the high-end amps of the time such as the Fender® Tweed Twin. Crystal clear in the treble range with transparent mids and powerful but tight bass, it is the “King of Clean Tones”.

The AlNiCo P12N is surely one of the most iconic Jensen speakers of the late ‘50s. Visually impressive because of the big bell cover on the magnet, it is the highest powered 12” speaker in the range. Among others, the P12N was used in the high-end amps of the time such as the Fender® Tweed Twin. Crystal clear in the treble range with transparent mids and powerful but tight bass, it is the “King of Clean Tones”.

The P12Q is a lower power sibling to the P12N, with a smaller voice coil and a vintage steel basket, nicknamed the “hot dog” or “sausage” because of the shape of the openings in its basket frame. Warm and balanced sounding, with a nice bite in the upper midrange, it is a very interesting allrounder, for many different applications from the traditional country and jazz tones to the more aggressive rock and roll and blues application. Typically it was found in ‘holy grail’ amps such as the vintage Tweed Deluxe and other similar models as well as the Ampeg® Jet, Gibson® GA-20 and many more.

The smallest powered AlNiCo 12” in the range, the P12R is the classic choice for the lower powered combo amps of the tweed era. It was very common in Fender®, Epiphone® and Ampeg® amps until the early ‘60s. The P12R is bright and colorful, has excellent cut and sparkle, and breaks up easily.

One of the first speakers ever used in a guitar amplifier, the P15N was loaded in the earliest Fender Bassman® and Bandmaster® amps, setting the milestone for those classic tones. The P15N delivers a warm, full bodied tone, with deep basses, and a nice, extended top end. Excellent for all different shades of clean and pushed clean tones.

The P6V offers a tonal alternative to the C6V. Balanced and powerful for its size, its AlNiCo magnet assembly grants an extra-chimey character to the tone. This makes it a great choice for those applications where clean, detailed sounds on the edge of clipping are the key target for the player.

One of the archetypical speakers in the range, the P8R has been installed in thousands of Champ and Princeton style amps for decades. Slightly clearer sounding than the C8R, its ceramic cousin, the P8R shines in clean and slightly crunch applications, where the typical chime of the AlNiCo magnets helps the sparkling harmonics to bloom.

For bass players demanding well-defined clarity and stunning articulation together with a rich, full tone, PULSE12 bass speakers deliver an ideal combination of responsiveness and rock solid low end. The Kevlar-loaded cone pulses with up to 200 watts of raw bass power. Expect each note to deliver a thick, percussive attack along with the mid-range necessary to break through in any performance situation.

Lead/rhythm guitar 10" American speaker, 8 ohm. Very loud, touch sensitive and responsive with nice bell sounding top end and a little bite.

Lead/rhythm guitar 12" American speaker. Nice tight low-end, smooth midrange and top end sparkle.

Look inside the back of a standard 4x12 and you may well find a quartet of Rocket 50s. This speaker performs well with any playing style, and won't break the bank - an affordable entry level speaker for those seeking the Celestion sound.

Two lug terminal boards for speaker frames. This board can be used to repair speakers with damaged or missing wire mount boards.

Lead/rhythm guitar 12" speaker, 8 or 16 ohm. Very powerful, thick and chunky tone. Very touch sensitive with good sustain. Awesome bottom end.

8" low frequency driver providing 94dB sensitivity.

For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.

This bass and mid range driver is suitable for use in 2-way systems. It features an extended low frequency range and edge-wound voice coil for high efficiency and power handling.

Ferrite magnet compression driver

• 1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coil
• 40Wrms power handling (AES standard) and 110dB sensitivity
• Sound CastleTM clamping ensures even pressure on diaphragm assembly for reduced distortion
• One piece PETP diaphragm and surround
• Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design

Celestion diaphragm for CDX1-14 compression drivers

Celestion PETP diaphragm for CDX1-17 compression drivers

Celestion diaphragm for CDX14 and CDX20 compression drivers