You are here

Tech Supplies

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(2 pages)
S-ZVT1000S-ZVT1000Item ID: 009615Valve Tester - Orange, VT-1000
The compact and extremely easy to use VT1000 is a fully automatic valve tester, which performs a wide range of tests quickly and accurately. The benefits of using the VT1000 are clear and wide reaching; users can quickly and simply match and test valves, plus receive a reliable health check as to whether their valves are good, bad or worn. Orange Amps developed the world’s first fully automatic, portable, digital valve tester, the VT1000, to make it easy to test amp valves. Until now testing valves with little or no knowledge of valve theory was difficult, expensive and often unreliable.
Read More...
$499.00
$449.10
S-TBKINGPROS-TBKINGPROItem ID: 004319Bias King Pro
As tubes age, their bias point will shift. By using the BIAS KING™ you can maintain the sound you want by periodically adjusting the bias on your own amp. This will keep your tubes in top shape throughout their life and will keep your amp sounding its best. Use the chart provided to find out what range of current flow is acceptable for the tube type in your amp. It works on most octal socket tube amps, and requires no power source other than the amp it's plugged in to. It can also be used to match tubes into pairs.
Read More...
$189.95
$170.96
S-MAFGENS-MAFGENItem ID: 004264Generator - Audio Frequency
The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep.
Read More...
$169.95
$152.96
S-MRFGENS-MRFGENItem ID: 004265Generator - RF Signal
Compact solid state RF signal generator designed for the hobbyist, service bench and technical instruction. The generator is most suitedfor checking and aligning the IF circuit and tuners in AM, FM, and TV's. 100KHz to 150MHz in 6 bands and up to 450MHz on third harmonics. 5.9" high x 9.8" wide x 5.1" deep. Features: Wide frequency range- 100 Khz to 150 MHz · With 1 KHz oscillator purpose of modulation · High Stability · Output control- 0dB/-20dB/-40dB and fine adjuster · Frequency accuracy + or - 5% · RF output- 100mV rms appx.
Read More...
$169.95
$152.96
S-TBIASMETERS-TBIASMETERItem ID: 004317Bias and Matching Meter, Alessandro
After all is said and done, few components are as critical to the quality of your sound as your power tubes. In short, improperly balanced and biased tubes can wreak havoc with your amp's overall performance, and more importantly with your sound. Unbalanced tubes will draw unequal amounts of current, won't sound as musical, and will probably emit an audible hum. But the Alessandro Bias and Matching Meter lets you regain control over your amp's sonic output.
Read More...
$155.00
$139.50
S-TBKINGS-TBKINGItem ID: 004318Bias King
As tubes age, their bias point will shift. By using the BIAS KING™ you can maintain the sound you want by periodically adjusting the bias on your own amp. This will keep your tubes in top shape throughout their life and will keep your amp sounding its best. Use the chart provided to find out what range of current flow is acceptable for the tube type in your amp. It works on most octal socket tube amps, and requires no power source other than the amp it's plugged in to. It can also be used to match tubes into pairs. Features one tube socket allowing the bias to be checked one tube at a time.
Read More...
$129.95
$116.96
S-Z3220S-Z3220Item ID: 004413Digital Multimeter
Ergonomically designed. Uses one 9V battery, included. 0.5% basic DC accuracy · audible continuity test · 3 1/2 digit LCD, 0.625" high · 10M ohm input resistance · 1.5" x 3" x 7.5"(w/o rubber case) · overload protection · voltage to 1000VDC, 750VAC · capacitance to 20 microfarads · polarity indicator · frequency to 10MHz · over range indicator · 10A (AC or DC) · low battery indicator · hFE and diode test · tilt stand and case · 1.6 lbs. ·
Read More...
$44.95
$40.46
S-Z150S-Z150Item ID: 004411Digital Capacitance Meter
Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc. 0.1 pf to 20,000 μF, 9 ranges · Over range indicator · 0.5% basic accuracy · Tilt stand · 3-1/2 digit LCD, 1" h x 2-1/4" w · 1.5" x 2.8" x 6" · Zero adjustment · 1.1 lbs · Input protected · Low battery indicator · Includes case, leads, battery, spare fuse and instructions ·
Read More...
$42.95
$38.66
S-Z370S-Z370Item ID: 004414Analog Multimeter - Volt-Ohm-Millimeter
Intermagnetic version to prevent interference from magnetic fields. Double protection of diode and fuse, transistor hFE test function. DCV: 0.25V, 0.5V, 2.5V, 10V, 50V, 250V 1000V. ACV: 10V, 50V, 250V, 500V,1000V. DCA: 50 uA, 2.5 mA, 25mA, 250mA. Ohms: x1, x10, x1k, x10k. Dimensions: 148mm x 98mm x 41mm
Read More...
$16.95
$15.26
S-Z5R542S-Z5R542Item ID: 004415Test Lead, Set, Military Specification
Contains: 2 alligator clips, 2 spade lugs, 2 pin jacks (long), 2 pin jacks (short), 2 probe tips, 2 tip insulators and 2 universal test jacks. All have threaded male ends. Also contains two 54" leads with female threaded ends. All parts are rolled up in a convenient pouch. Sealed in foil military package. The ultimate set of test leads!
Read More...
$9.95
$8.96

Pages

(2 pages)
Subscribe to RSS - Tech Supplies