[Skip to content]

Tech Supplies

  • Sort:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • View All (33 pages)
Lizard Spit Guitar Polish, 1oz.
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
More Details
$3.75
Lizard Spit Fretboard Conditioner, 4oz.
Removes dirt and stains and slows oxidation of frets. Protects against drying and cracking by moisturizing and conditioning to preserve fret board life. Use Lizard Spit Guitar Polish for finished surfaces.
More Details
$8.25
Lizard Spit Micro Fiber Cloth
Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.
More Details
$6.25
Lizard Spit Guitar/Bass Care Pack (Guitar Polish, Fretboard Conditioner, and Micro Fiber Cloth)
This Lizard Spit Guitar and Bass Care Pack contains 4 oz. Fretboard Conditioner, 4 oz. Guitar Polish, and a Lizard Spit Micro Fiber Cloth, everything you need to keep your guitar or bass in good condition and looking brand new!
More Details
$21.95
Lizard Spit Guitar Polish, 4oz.
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
More Details
$6.95
Lizard Spit VIP Vintage Instrument Polish, 4oz.
Lizard Spit vintage polish for all paint surfaces. Removes: Old wax build-up without causing chemical reactions commonly associated with other products. Produces: Brilliant Shine.
More Details
$10.75
Lizard Spit Guitar Polish, 8oz.
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
More Details
$10.75
Lizard Spit Slick Nutz Slot Lube, 1oz.
Nut slot lube non-oil based, doesn’t collect dust or absorb sound.
More Details
$10.75
Guitar Player Tech Kit, CruzTOOLS GrooveTech
Guitar players may know a little about truss rods and action, but few actually attempt adjustment. That's a shame, because a good setup will improve your performance. The GrooveTech provides everything you need to work on your guitar, plus an Easy Setup Guide that takes the mystery out of the process. Eleven hex keys are color-coded gold for metric and black for inch sizes, and long pattern for easy access. All truss rod sizes are ball end. Also included is a thickness gauge, ruler, capo, cutters, string winder, 6-in-1 screwdriver, and LED flashlight.
More Details
$59.95
DeoxIT® D5 Spray
Provides a light (5%) coating of DeoxIT® liquid. 5 oz. (200ml), flammable (until solvent evaporates), adjustable valve. No CFC's/HCFC's. Postal regulations prohibit shipping aerosol cans outside the continental U.S.
More Details
$13.35
Wire - Hook-Up, 22 AWG, 50' roll, Black
600V stranded wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Wire - Hook-Up, 22 AWG, 50' roll, Red
600V copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, Black, 600V
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spools, black. 105°C temperature rating, 600V.
More Details
Wire - Hook-Up, 22 AWG, 50' roll, White
600V copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Wire - Hook-Up, 22 AWG, 50' roll, Green
600V stranded copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, Red, 600V
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spools, red. 105°C temperature rating, 600V.
More Details
Wire - Hook-Up, Lacquered, 50' Spool, Black
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, black. 105°C temperature rating, 600V.
More Details
$10.50
Wire - Bus, #22, 100' Spool
#22 solid tinned coper bus wire. 105°C temperature rating, 600V.
More Details
$6.95
Wire - Hook-Up, 22 AWG, 50' roll, Blue
600V stranded copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
DeoxIT® Fader Lube Liquid squeeze tube, Caig
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube
More Details
$4.70
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, White, 600V
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spools, white. 105°C temperature rating, 600V.
More Details
Large Tackle Box
This tackle box works great for storing caps, pots, resistors and other electronic components. 10 different compartments, made of plastic, measures 8.25" x 4.25".
More Details
$6.50
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, Green, 600V
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spools, green. 105°C temperature rating, 600V.
More Details
Small Tackle Box
This tackle box works great for storing caps, pots, resistors and other electronic components. 8 different compartments, made of plastic, measures 5" x 3.375".
More Details
$5.95
Wire - Hook-Up, 22 AWG, 50' roll, Yellow
600V copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Wire - Hook-Up, Lacquered, 50' Spool, White
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, white. 105°C temperature rating, 600V.
More Details
$10.50
Solder, .031" Kester 44, 1 lb spool
(60/40 Rosin Core) -.031" Diameter, 1 lb Spool
More Details
$31.95
Wire - 20 AWG, Solid Core, Lacquered Cloth Cover, Yellow, 600V
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spools, yellow. 105°C temperature rating, 600V.
More Details
Wire - Hook-Up, 22 AWG, 50' roll, Purple
600V stranded copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Shearcutter pliers, Xcelite general purpose
5" Overall Length, ¾" Jaw Length. Great for cutting wire and component leads, etc.
More Details
$7.50
Wire - Hook-Up, Lacquered, 50' Spool, Red
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, red. 105°C temperature rating, 600V.
More Details
$10.50
22 AWG High-end Guitar Wire, Alessandro
Eliminate noise right near the source of your electric guitar signal with this high quality shielded wire. Used to connect your guitar's jack to its controls. 105°C temperature rating, 600V.
More Details
$5.95
Wire - Hook-Up, 22 AWG, 50' roll, Brown
600V stranded copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Wire - 20 AWG, Solid Core, Lacquered Cloth Cover, Blue, 600V
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spool, blue. 105°C temperature rating, 600V.
More Details
Wire - Hook-Up, Lacquered, 50' Spool, Yellow
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, yellow. 105°C temperature rating, 600V.
More Details
$10.50
Wire - 18 AWG Speaker - Twisted Pair, Black and White, Stranded
Teflon insulated silver plated copper wire delivers sonic superiority. 18 awg, twisted pair, black and white. Sold per foot. Made in the USA. Sold per foot. 105°C temperature rating, 600V.
More Details
$3.50
Wire - Magnet, 42 Gauge, 1/8 lb (Approximately 6, 000 feet)
42-gauge magnet wire for winding pickup coils,.25 pounds. 105°C temperature rating, 600V.
More Details
$12.95
Wire - Hook-Up, 22 AWG, 50' roll, Orange
600V copper wire. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
More Details
$4.95
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, Brown, 600V
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spools, brown. 105°C temperature rating, 600V.
More Details
Wire - 18 AWG Hook-Up, Twisted Pair, Black and White, Solid
Teflon insulated silver plated copper wire delivers sonic superiority. 18 awg, twisted pair, black and white. Sold per foot. Made in the USA. Sold per foot. 105°C temperature rating, 600V.
More Details
$3.50
Wire - Hook-Up, Lacquered, 50' Spool, Blue
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, blue. 105°C temperature rating, 600V.
More Details
$10.50
Wire - Hook-Up, Lacquered, 50' Spool, Green
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, green. 105°C temperature rating, 600V.
More Details
$10.50
Wire - Hook-Up, Lacquered, 50 Spool, Orange
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, orange. 105°C temperature rating, 600V.
More Details
$10.50
Staking Tool for Eyelets and Turrets
Turret staking tool. Directions: Drill 1/8" hole Insert eyelet Flip board over on to a hard service Center staking tool over the eyelet Strike staking tool with hammer to clamp eyelet to board
More Details
$9.95
Wire - Magnet, 42 Gauge, 1/4 lb ( Approximately 12, 000 feet)
42-gauge magnet wire for winding pickup coils..25 pounds. 105°C temperature rating, 600V.
More Details
$22.95
Soldering iron tip - screwdriver 1/16", for WLC100/WP35, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.25
Wire - Magnet, 42 Gauge, 1/2 lb (Approximately 24, 000 feet)
42-gauge magnet wire for winding pickup coils..50 pounds. 105°C temperature rating, 600V.
More Details
$38.95
Wire - Hook-Up, Lacquered, 50' Spool, Brown
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 50 foot spool, brown. 105°C temperature rating, 600V.
More Details
$9.95
Solder, .050" Kester 44 1Lb spool
(60/40 Rosin Core) -.05" Diameter, 1 lb Spool
More Details
$31.95
Soldering iron tip - screwdriver 1/8", for WLC100/WP35, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$5.50
Soldering iron tip - conical, for WLC100/WP35, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.95
Wire - Magnet, 42 Gauge, 3/8 lb (Approximately 18, 000 feet)
42-gauge magnet wire for winding pickup coils, 3/8 pounds. 105°C temperature rating, 600V.
More Details
$31.95
Wire - Hook-Up, Lacquered, 1000' Spool, Green, 600 Volt (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, green. 105°C temperature rating, 600V.
More Details
$175.00
Wire - Hook-Up, Lacquered, 1000' Spool, Red, 600 Volt (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, red. 105°C temperature rating, 600V.
More Details
$175.00
Wire - Hook-Up, Lacquered, 1000' Spool, Blue, 600 Volt (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, blue. 105°C temperature rating, 600V.
More Details
$175.00
Wire - Hook-Up, Lacquered, 1000' Spool, Brown (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, brown. 105°C temperature rating, 600V.
More Details
$175.00
Wire - Hook-Up, Lacquered, 1000 Spool, Orange, 600 Volt (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, orange. 105°C temperature rating, 600V.
More Details
$175.00
Wire - Hook-Up, Lacquered, 1000' Spool, Black (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, black. 105°C temperature rating, 600V.
More Details
$175.00
Wire - Hook-Up, Lacquered, 1000' Spool, Yellow (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, yellow. 105°C temperature rating, 600V.
More Details
$175.00
Wire - Hook-Up, Lacquered, 1000' Spool, White, 600 Volt (1000 feet)
#20 stranded copper wire with modern insulation an lacquered cotton braid finish. Provides safety and authentic vintage look. 1000 foot spool, white. 105°C temperature rating, 600V.
More Details
$175.00
The Nibbler
Instructions Simply drill 3/8" hole insert cutting head and compress handles. Gives you the ability to make square holes for fuse holders, special connectors displays etc. Material to be nibbled is placed in the gap between the punch and blade channel. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal. A scribe line can be followed by looking down on work in this position. A slot is cut by making successive cuts. To make a sharp 90 degrees turn, pull the tool out of the slot. Turn the work 90 degrees and insert the tool again.
More Details
$6.95
DeoxIT® Fader Lube, 5% solution, Caig
This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
More Details
$14.95
Wire - 16 AWG, stranded with tin braid
For vintage reverb tank cables. 16 AWG, stranded with tin braid. Outer Diameter: 0.10". 105°C temperature rating, 600V.
More Details
$0.95
DeoxIT® DN5 pump spray
DeoxIT® DN5 Spray, 5%, 163 g, non-flammable, quick dry - non drip and safe on plastics! (Applications = 1200 ±).
More Details
$19.95
Cable, 8 Conductor, Cotton Covered, 20 Gauge, Sold per foot
8 conductor 20 gauge stranded wire with brown cotton braid over all. Replaces 1920s Atwater Kent battery cable. 105°C temperature rating, 600V.
More Details
$4.00
String Cutters, CruzTOOLS GrooveTech
CruzTOOLS developed the GrooveTech String Cutters specifically for Guitar and Bass strings. A special induction heat-treatment process prevents blades from denting, and the high-leverage handle design makes even "B" bass strings easy to cut. Comfortable rubber grips feel good in your hands, and the cutters are compact enough to fit into any guitar case or gig bag.
More Details
$11.95
Digital Capacitance Meter
Nine ranges give precision readings from 0.1 pF to 20,000 µF. Can be used to check virtually all capacitors for tolerance value, selecting matched sets, etc. 0.1 pf to 20,000 μF, 9 ranges Over range indicator 0.5% basic accuracy Tilt stand 3-1/2 digit LCD, 1" h x 2-1/4" w 1.5" x 2.8" x 6" Zero adjustment 1.1 lbs Input protected Low battery indicator Includes case, leads, battery, spare fuse and instructions
More Details
$42.95
Guitar/Bass Multi-Tool, CruzTOOLS GrooveTech
Multi-Tool for Guitar and Bass. Includes Hex Keys, Screwdrivers and a Ruler. The first multi-tool for guitars and basses that's actually useful, without unnecessary gimmicks. Whether you have a USA or imported axe, we've got you covered for most bridge, truss rod, and other adjustments. Includes four metric and three fractional hex keys, two Phillips screwdrivers, a 2.5mm slotted screwdriver, and ruler for setting action. Truss rod sizes are ball-end for easy access. All keys are pro-grade, using heat-treated S2 material with a polished chrome finish.
More Details
$15.95
Solder station WLC100, Weller
40 Watts Soldering Station for Hobbyist and DIYer Input Voltage: 120 Output Voltage: 120 Power Consumption: 5 - 40 watts Temperature Range: 900ºF max On/Off switch with "power-on" indicator light Variable control produces 5 to 40 watts Natural sponge tip cleaning pad Ideal for hobbyist, DIYers and students Includes 1/8" screwdriver tip UL listed
More Details
$57.95
Bias and Matching Meter, Alessandro
After all is said and done, few components are as critical to the quality of your sound as your power tubes. In short, improperly balanced and biased tubes can wreak havoc with your amp's overall performance, and more importantly with your sound.
More Details
$155.00
Solder wick, 0.125" diameter
.125" Wide x 5' Long. Great for removing solder from printed circuit boards.
More Details
$3.50
Manual desoldering pump, Weller
Removes melted solder by suction
More Details
$25.95
Soldering iron tip - conical, for WES51, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.95
Digital Multimeter
Ergonomically designed. Uses one 9V battery, included. 0.5% basic DC accuracy audible continuity test 3 1/2 digit LCD, 0.625" high 10M ohm input resistance 1.5" x 3" x 7.5"(w/o rubber case) overload protection voltage to 1000VDC, 750VAC capacitance to 20 microfarads polarity indicator frequency to 10MHz over range indicator 10A (AC or DC) low battery indicator hFE and diode test tilt stand and case 1.6 lbs.
More Details
$44.95
Test Lead, Set, Military Specification
Contains: 2 alligator clips, 2 spade lugs, 2 pin jacks (long), 2 pin jacks (short), 2 probe tips, 2 tip insulators and 2 universal test jacks. All have threaded male ends. Also contains two 54" leads with female threaded ends. All parts are rolled up in a convenient pouch. Sealed in foil military package. The ultimate set of test leads!
More Details
$9.95
Contact Cleaner Wash, Caig
DeoxIT® Brand Contact Cleaner Wash, Val-U Series Spray, adjustable valve, 10 oz. / 283 g, fast evaporationg and safe on plastics. Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$6.25
DeoxIT® DN5 Mini spray
Contact cleaner and rejuvenator for electrical connections. Quick dry, non drip and safe on plastics.
More Details
$8.75
Seizer forceps, Xcelite
Versatile tool with unusual holding qualities, Clamps firmly to hold wires for soldering, Acts as a heat sink and retrieves small parts from hard to reach places, Precision machined tempered stainless steel, 3 position snap lock, Serrated jaws.
More Details
$8.95
Tool - Cruz Tools, GrooveTech Jack/Pot Tool
Instrument and amp jacks are notorious for coming loose. And with a shallow nut and recessed cavity, access can be challenging. Until now, that is. The GrooveTech Jack and Pot Wrench provides three thin-wall sockets - ½", 7/16", and 12mm - in a compact four-inch tool to handle the most common sizes of jacks and pots on instruments, amps, and other audio gear. Add a dab of threadlocker, and you'll probably never have to deal with that loose jack again. Sockets are pro-grade with a dazzling polished chrome finish.
More Details
$14.95
Soldering iron tip - flat, for WES51, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.95
Soldering iron tip - conical, for WTCPT, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.95
Soldering iron tip - screwdriver, for WES51, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.95
DeoxIT® D100 Spray, Caig
DeoxIT® D100S Spray, 100% solution, 57 g, no solvents, metered one-shot valve dispenses 100% DeoxIT® , (Applications = 500 ±). Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$24.95
Heat Sink
Temporary Heat Sink Used while Soldering
More Details
$1.75
Long needle nose pliers, Xcelite
Extra long nose, Serrated jaws, Green cushion grips
More Details
$22.95
Desoldering pump tip - replacement for 7874B, Weller
Restore the performance of your desoldering pump by replacing the tip.
More Details
$6.50
Soldering iron tip - screwdriver, for WTCPT, 700F, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.95
Analog Multimeter - Volt-Ohm-Millimeter
Intermagnetic version to prevent interference from magnetic fields. Double protection of diode and fuse, transistor hFE test function. DCV: 0.25V, 0.5V, 2.5V, 10V, 50V, 250V 1000V. ACV: 10V, 50V, 250V, 500V,1000V. DCA: 50 uA, 2.5 mA, 25mA, 250mA. Ohms: x1, x10, x1k, x10k. Dimensions: 148mm x 98mm x 41mm
More Details
$16.95
Marksman soldering iron, Weller
Input Voltage: 120, Power Consumption: 40 watts, Tip Temperature: 900ºF, Heating Element Type: Nichrome Wound, fiberglass and ceramic insulated, Fine quality consumer iron, On/Off indicator light, UL listed
More Details
$23.95
Solder wick, 0.075" diameter
.075" Wide x 5" Long. Great for removing solder from printed circuit boards.
More Details
$3.50
Punch - Greenlee Chassis, ¾" Diameter
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$50.00
Soldering iron WP35, controlled output, Weller
Input Voltage: 120 Power Consumption: 35 watts Tip Temperature: 850ºF Heating Element Type: Nichrome wound, fiberglass and ceramic insulated Lightweight handle with cushion grip for ease of use and comfort Comes with 1/8" screwdriver tip Stand (S-TPH60) sold separately Three wire grounded power cord for your safety UL listed Stand sold separately (S-TPH60)
More Details
$56.95
Bulb solder-off, Weller
Removes melted solder by suction
More Details
$11.50
Soldering iron tip - screwdriver, for WTCPT, 800F, Weller
Restore the performance of your soldering iron by replacing the tip.
More Details
$4.95
Relieved tapered head Xcelite cutter pliers
Diagonal cutting pliers, Relieved tapered head flush cutter, Allows use between closely spaced components, Green cushion grips
More Details
$20.95
Serrated jaw pliers, Xcelite
5 ½" Overall Length, 1 ½" Jaw Length
More Details
$13.95
Generator - Audio Frequency
The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep. 8 lbs. Features: High frequency stability: within ± 2Hz Frequency range - 10 Hz ~ 1 MHz, 5 decade bands Accuracy = 10Hz ~ 1 MHz - ± 5% + 2Hz
More Details
$169.95
Pliers with 60 degree curved nose, Xcelite
Xcelite Curved Nose Pliers, with 60° curved nose, smooth jaws thin tip and green cushion grips.
More Details
$24.95
Tube extractor
Tube Extractor with straight jaws for firm grip, spring steel construction, nickel plated, insulated jaws.
More Details
$12.95
Xcelite XP600 6 Piece Precision Screwdriver Set
Electrostatic Discharge Safe. Designed to maximize efficiency and production. Fast turning swivel cap with cavity provides precise centering. Constructed of superior strength materials. Black oxide tips for longer wear life.
More Details
$26.95
T-Handle Drum Key, CruzTOOLS GrooveTech
The GrooveTech puts a new 'spin' on drum keys with a unique sliding 'T' handle that allows quick and easy changing of drum heads without power tools. The handle can be slid from one end to the other for extra leverage - especially useful for high-tension drum corps tuning. Fit and finish is top-drawer, using heat-treated chrome vanadium alloy with a polished chrome finish. The detachable ¼"' drive drum key socket is made to precise tolerances.
More Details
$15.95
Heat gun 1095, Weller Ungar
Used to shrink heat shrink tubing for insulation
More Details
$64.95
Wire Stripper/Cutter - Xcelite, 5", with Cushion Grip Handle
5" wire stripper & cutter with cushion grip handles. Features: Cuts and strips both solid and stranded wire cleanly, neatly. Adjustable screw stop for different wire sizes. Hardened with ground blades. Red plastic-coated cushion grip provides maximum leverage.
More Details
$9.95
Dr. Duck's Ax Wax & String Lube, Organic, Made in USA
For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.
More Details
$6.95
Reflector for heat gun 1095, Weller
For heat shrink tubing
More Details
$7.95
DeoxIT® Fader Lube 100% spray, Caig
DeoxIT® FaderLube Spray (formerly CaiLube MCL, MCL100S-L2), 100% solution, 57 g, (Applications = 500 ±). Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$18.95
Wire Stripper/Cutter - Xcelite, 6", with Spring and Lock
6" stripper, cutter with spring and lock, cushion grip handles, carded. Features Wire cutting and stripping edges conveniently located in front of pivot Allows use in tight places Needle nose pliers add wire pulling and bending capabilities Scissors-action stripper for cleaner, faster and more accurate stripping Serrated edge Includes work-speeding automatic spring and lock Red cushion grip handle provides maximum leverage For copper and aluminum wire 10-22 AWG
More Details
$19.95
Punch - Greenlee Chassis, 1-1/8" Diameter
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$62.95
Bass Player Tech Kit, CruzTOOLS GrooveTech
Not wanting to leave bass players out, we developed an alternate kit optimized for low-enders. The hex key set is matched to virtually all bass makes, and the string winder has been removed to save a couple of bucks. Like its guitar brethren, the GrooveTech Bass Kit has top-shelf tools that are lifetime guaranteed, and stored in a pouch that will fit into most gig bags. An Easy Setup Guide will make you comfortable with truss rod, action, pickup, and intonation adjustment. After a few setups, you'll immediately know when a minor tweak is called for. GTBAS1 Bass Player Tech Kit Includes:
More Details
$57.95
Generator - RF Signal
Compact solid state RF signal generator designed for the hobbyist, service bench and technical instruction. The generator is most suitedfor checking and aligning the IF circuit and tuners in AM, FM, and TV's. 100KHz to 150MHz in 6 bands and up to 450MHz on third harmonics. 5.9" high x 9.8" wide x 5.1" deep. Features: Wide frequency range- 100 Khz to 150 MHz With 1 KHz oscillator purpose of modulation High Stability Output control- 0dB/-20dB/-40dB and fine adjuster Frequency accuracy + or - 5% RF output- 100mV rms appx. (up to 35MHz unloaded) Output control- High-low switch, fine adjust
More Details
$169.95
DeoxIT® Liquid, needle dispenser, Caig
DeoxIT® D5L Needle Dispenser, 100% solution, 25 ml,(Applications = 625 ± drops, 0.04 ml/drop).
More Details
$26.95
Bench top smoke absorber, Weller
Keep those fumes out of your face while soldering with this benchtop smoke absorber.
More Details
$71.95
DeoxIT® Gold spray
DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).Use on plated connectors, contacts and metal surfaces for maximum performance and protection.Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation.
More Details
$19.65
Punch - Greenlee Chassis, ½" Diameter
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$55.95
Wire Stripper/Cutter - Xcelite, 6", W/O Spring and Lock
6" Stripper and cutter without spring and lock with cushion grip carded handles. Features: Wire cutting and stripping edges conveniently located in front of pivot Allows use in tight places Needle nose pliers add wire pulling and bending capabilities Scissors-action stripper for cleaner, faster and more accurate stripping Serrated edge Red cushion grip handle provides maximum leverage For copper and aluminum wire 10-22 AWG
More Details
$16.95
Weller WES51 Analog Solder Station
The Weller WES51 Analog Soldering Station, with included soldering pencil, stand, and sponge, is the perfect choice for a variety of soldering applications, including industrial manufacturing, rework, repairs, and more. The comfortable foam-grip pencil and variable temperature controls give you complete command of your work for precise results. Plus, with a non-burnable silicone rubber cord, ESD safety, and automatic shut-off technology, the WES51 is safe enough to use in a continuous production environment.
More Details
$129.95
Heat Shrink - 0.187" Diameter, 27 pieces, 6" each
Shrinks to half it's original size when heated by heat gun, soldering iron or just a match. Use for insulating terminals, connectors and wire splices. Comes in 6" length, quantity of 27.
More Details
$6.95
Soldering station WTCPT, controlled output, Weller
60 Watts, 120v Temperature Controlled Soldering Station
More Details
$184.95
DeoxIT® D100L squeeze tube, Caig
DeoxIT® D100L Squeeze Tube, 100% solution, 2 ml,(Applications = 50 ± drops, 0.04 ml/drop).
More Details
$4.70
Reducer for heat gun 1095, Weller
Reducer is used for concentrating heat on Weller/Ungar heat gun.
More Details
$7.95
Soldering iron stand for WP35, Weller
Stand for weller soldering iron part number S-TWP35.
More Details
$29.95
Punch - Greenlee Chassis, 1-1/4" Diameter
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$87.95
DustALL Pro, Caig
DustALL PRO: precision Air Duster Removes Dirt, Lint & Particles - 100% Non-Flammable. Quickly and safely removes dust, lint and particles from sensitive electronic equipment, computers, lab equipment, optical grade surfaces and other mechanisms and equipment. Packaged with a precise one-piece trigger valve and extension tube for controlled application. Portable, precision filtered. No CFC's/HCFC's. 10 ounces, non-flammable Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$8.95
Plastic polish, Novus set of each 8 oz size
By using a few simple techniques, along with NOVUS Plastic Clean & Shine No. 1, NOVUS Fine Scratch Remover No. 2 & NOVUS Heavy Scratch Remover No. 3, you can actually add life to plastic and keep it looking new. Best of all, you don't have to be a pro to get professional results.
More Details
$15.65
Punch - Greenlee Chassis, 1" Diameter
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$56.95
Filters for bench top smoke absorber, Weller
For replacement of the filters used in the benchtop smoke absorber (S-TWSA350)
More Details
$8.95
Punch - Greenlee Chassis, 5/8" Diameter
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$48.95
Bias King Pro
As tubes age, their bias point will shift. By using the BIAS KING™ you can maintain the sound you want by periodically adjusting the bias on your own amp. This will keep your tubes in top shape throughout their life and will keep your amp sounding its best. Use the chart provided to find out what range of current flow is acceptable for the tube type in your amp. It works on most octal socket tube amps, and requires no power source other than the amp it's plugged in to. It can also be used to match tubes into pairs.
More Details
$189.95
Punch - Greenlee Chassis, 11/16" Diameter
Round hole punches for use in mild steel up to 16 gauge. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$48.95
Jumper Test Lead Set - Clip 35mm, Total Length 24", 22AWG
Set of 10 Jumper Test Leads " Alligator Clips 35mm each. Total Length 24", 22AWG wire. Black, Red, White, Yellow, Green
More Details
$3.95
Punch - Greenlee Chassis, 15/16" Diameter
Round hole punches for use in mild steel (up to 10 gauge), aluminum, fiberglass and plastic. Make professional chassis punches on your projects. Absolutely no returns unless punch is defective!
More Details
$59.95
Plastic polish, Novus #2, 8 oz
Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. for best results, follow with Novus No. 1 polish.
More Details
$5.50
Draw Studs - Greenlee, with Bearing for 11/16" through 1-1/4" Punches
For 11/16", ¾", 15/16", 1", 1 1/8" and 1 ¼" punches. Stud is 3/8" x 1 5/8" and includes bearing.
More Details
$24.95
Spaghetti - Old-Style, White, 20 AWG, Minimum Order is 10'
White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG. 11 AWG also available part number S-M401W.
More Details
$0.50
A minimum order of at least 10 is required.
Draw Studs - Greenlee, replacement for ½" and 5/8" Punches
For ½" and 5/8" punches. Stud is ¼" x 1 3/8".
More Details
$8.95
Screwdriver Set - Xcelite, Mini, 6 pieces
6-Piece Mini-driver Kit. Features: Miniature version of compact convertible set. for precise detail work. Mini-drivers consist of jeweler's type and Phillips® screwdriver blades. Molded in color-coded plastic handles. Contains a black torque amplifier handle. Furnished in see-through plastic case. Mini-drivers available separately.
More Details
$16.95
Soldering iron tip - Weller, Replacement for PSI100, 1/32" Flat, up to 850°F
1/32" single flat soldering tip to 850ºF
More Details
$7.95
Connector Cleaning Brushes (25), Caig
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 25
More Details
$12.50
Soldering iron tip - Weller, Replacement for PSI100, 1/8" Flat, up to 850°F
1/8" single flat soldering tip to 850ºF
More Details
$8.95
Soldering iron tip - Weller, Replacement for PSI100, Hot Knife tip
Hot knife tip to 850ºF
More Details
$9.65
DeoxIT® Brush Applicator, Caig
DeoxIT® D100L Brush Applicator, 100% solution, 7.4 ml, (Applications = 500 ± brush strokes, 10mm long).
More Details
$15.95
Screwdriver Set - Xcelite, 3/16" & ¼" Phil Slotted, Reversible
Two piece reversible screwdriver set. Includes: One RB1 reversible screwdriver blade, Phillips Tip Size #1, Slotted tip size 3/16" One RB2 reversible screwdriver blade, Phillips Tip Size #2, Slotted tip size ¼" One amber handle
More Details
$17.50
Caikote 44 Kit, Caig
Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Net Weight: 1.0 g Surface Resistivity: 50 ohms/sq Volume Resistivity: 0.5 ohm-cm Attenuation: 60-65 dB @ 2 mils Recommended Film Thickness: 2.0 - 3.0 mils (51-75 mm)
More Details
$9.95
Bias King
As tubes age, their bias point will shift. By using the BIAS KING™ you can maintain the sound you want by periodically adjusting the bias on your own amp. This will keep your tubes in top shape throughout their life and will keep your amp sounding its best. Use the chart provided to find out what range of current flow is acceptable for the tube type in your amp. It works on most octal socket tube amps, and requires no power source other than the amp it's plugged in to. It can also be used to match tubes into pairs.
More Details
$129.95
Plastic polish, Novus #1, 8 oz
Cleans and glazes plastic surface to resist finger markings, dust build-up and is anti-static.
More Details
$4.50
Polish - Gibson® Luthiers Choice Triple Pack 4 oz of each
One 4oz bottle of each polish, string cleaner and fretboard conditioner. All Gibson Instrument Care products are exclusively formulated to be used on all nitro cellulose lacquer finishes.
More Details
$7.75
DeoxIT® Fader Grease, Caig
DeoxIT® FaderGrease was specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other mechanisms with sliding surfaces. Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, smoke, drink spills and other contamination also degrade the components' lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. 28 grams
More Details
$15.95
DeoxIT® Flux Wash, Caig
DeoxIT® Brand FLUX WASH, Val-U Series Spray, adjustable valve, 10 oz. / 283 g, fast evaporationg and safe on plastics. Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$6.25
Circuit writer, Caig
Circuit Writer precision conductive ink dispenser makes instant traces on most surfaces(epoxy, glass, metal). Draw traces on circuit boards, repair defective traces, make jumpers and shield electronics, design prototype circuits, repair rear-window heater traces. Silver based solution, 7ml pen dispenser.
More Details
$22.50
Polish mate, Novus (6 pieces)
Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates.
More Details
$2.10
DeoxIT® Shield spray
Seals, lubricates and preserves metal surfaces against oxidation and contamination. USE ON: Clean/new surfaces or those cleaned with DeoxIt. PreservIT contains no cleaners or deoxidizers. It provides long lasting protection for newly manufactured components or those cleaned by ultrasonics, DeoxIT® or other procedures. Provides a light (5%) coating. 200 ml(5oz), adjustable valve, no CFC's or HCFC's.
More Details
$15.95
DeoxIT® pump spray
DeoxIt Pump Spray 25% concentrate solution. Non-flammable. 150ml. May be shipped by air to US and other countries.
More Details
$19.95
DeoxIT® Fader Lube Mini Spray, Caig
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 5% solution, mini spray. Non Flammable.
More Details
$9.95
DeoxIT® L260NP Grease (Formerly Cailube) squeeze tube, Caig
Lithium-based preparation. Good lubrication, excellent wear resistance, excellent pressure resistance, excellent oxidation (galvanic corrosion) protection, high dripping-point characteristics. Operating temperatures: -40 C to 260 C. 2 grams, squeeze tube.
More Details
$4.70
Degreaser Wash, Caig
DeoxIT® Brand DEGREASER WASH, Val-U Series Spray, adjustable valve, 10 oz. / 283 g, fast evaporationg and safe on plastics. Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$6.25
DeoxIT® Gold GXMD, Vacuum Tube Survival Kit, Caig
The Caig DeoxIT® Gold GxMD Vacuum Tube Survival Kit includes everything you need to properly clean the pins of vacuum tubes and tube sockets. Includes: DeoxIT® Cleaner, 25% solution, 25 mL bottle, #D25L-25C DeoxIT® GOLD GX-MD, 100% solution, 7.4 mL bottle, #GXMD-2D8 Lint Free Cloth Squares, cotton, 12 each, #LFC-C Soaking Cups, 2 each Foam Swabs, 2 each, #SWP Socket Cleaning Brushers (black plastic, Large, 2 each, #AB Socket Cleaning Brush (metal wire), 1 each, #B-SS116
More Details
$35.95
DeoxIT® 2C Squeeze Tube Kit, Caig
Includes: DeoxIT® squeeze tube (#D100L-2C) DeoxIT® GOLD squeeze tube (#G100L-2C) DeoxIT® SHIELD squeeze tube (#S100L-2C) DeoxIT® FaderLube Liquid squeeze tube (#F100L-L2C)
More Details
$13.50
Plastic polish, Novus #3, 8 oz
Removes scratches from acrylic surfaces. More abrasive than Novus #2. effective for deeper scratches. Treatment must be followed by Novus #2 to buff and polish surface.
More Details
$6.50
Toner - Mohawk, Ultra Classic, Walnut Brown (Medium)
Walnut Brown - Use as a replacement for burnt umber. Great for late 1920s to early 1930s sets. 13oz. Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$7.95
Heat Shrink - 0.250" Diameter, 23 pieces, 6" each
Shrinks to half it's original size when heated by heat gun, soldering iron or just a match. Use for insulating terminals, connectors and wire splices. Comes in 6" length, quantity of 23.
More Details
$6.95
Toner - Mohawk, Ultra Classic, Perfect Brown, 13 oz can
Perfect Brown - A nice shade that is a great match for 1930s and 1940s sets. 13oz. Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$7.95
Wrinkle Finish Paint, Black, VHT
Great for refinishing vintage metal radio cabinets, faceplates and speakers. Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$9.95
A/V Survival Kit, Caig
Caig Audio/Visual Survival Kit. Includes: DeoxIT® DN5MS-15, (Applications = 150 ±) DeoxIT® GOLD GN5MS-15, (Applications = 150 ±) DeoxIT® FaderLube F5MS-H15, (Applications = 100 ±) DeoxIT® D1W, Individual Wipes, 3 each DeoxIT® GOLD G1W, Individual Wipes, 3 each DeoxIT® D100L-2C, (Applications = 50 ± drops, 0.04 ml/drop) DeoxIT® GOLD G100L-2C, (Applications = 50 ± drops, 0.04 ml/drop) DeoxIT® FaderLube F100L-H2C, (Applications = 50 ± drops, 0.04 ml/drop) Lint-free swabs, brushes and cloths Zip-lock pouch (4.5 x 7.5 x 1")
More Details
$27.50
Pointer Cotton Swab (25), Caig
Pointer Swabs, Cotton, with mini tapered tip and wood handle; 3 inch,.5 mm to 2.3 mm Head, package of 25.
More Details
$6.25
DeoxIT® Gold GN5 Spray, Caig
DeoxIT® GOLD GN5 Spray (formerly ProGold), 5% solution, 163 g, non-flammable, quick dry - non drip, and safe on plastics! Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$23.60
DeoxIT® Gold, Squeeze Tube, Caig
DeoxIT® GOLD G100L (formerly ProGold), Squeeze Tube, 100% solution, 2 mL, (Applications = 50 ± drops, 0.04 ml/drop)
More Details
$5.45
Axe wipes, Caig metal string cleaner (30 wipes)
Axe Wipes - Metal string cleaner prolongs life, improves sound quality and dissolves oxidation and corrosion on guitar strings. Protects against acid from hand and lubricates for fast smooth movement. 30 wipes.
More Details
$11.75
Spaghetti - Old-Style, White, 11 AWG, Minimum Order is 10'
White fiberglass sleeving is varnished and closely resembles early style spaghetti. 11AWg. 10 foot minimum order.
More Details
$0.60
DeoxIT® pen (7ml, 100% solution)
The pen applicator gives you more control over the regular spray. Contains DeoxIT® 100% solution. No solvent. 7 ML of solution. The 5% solutions contain petroleum naphtha as the carrier solvent, the 100% solutions, i.e. pens, do not contain a solvent.
More Details
$22.95
Pen, DeoxIT® GOLD
DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).Use on plated connectors, contacts and metal surfaces for maximum performance and protection.Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation.
More Details
$21.95
DeoxIT® Gold, Brush Applicator, Caig
DeoxIT® GOLD G100L (formerly ProGold), 7.4mL Bottle with Brush Applicator, 100% solution. Cleaner Audio Cleaner Video Reliable Data Improve your: USB Firewire HDMI/DVI RCA BNC SCSI Ethernet S-Video Component Video HDTV Connections 1/4" Input Jacks
More Details
$26.95
DeoxIT® Liquid, 5%, 118 ML, Caig
D5L Liquid, DeoxIT® D-Series D5L Liquid, 5% solution, 188 ml.
More Details
$30.95
DeoxIT® Gold Electronic Maintenance Kit, Caig
Includes: DeoxIT® brush applicator (#D100L-2DB), (Applications = 500 ± brush strokes, 10mm long) DeoxIT® GOLD brush applicator (#G100L-2DB), (Applications = 500 ± brush strokes, 10mm long) Lint-free swabs, brushes and cloths
More Details
$31.45
GC contact treatment, De-Ox-Id light oil based
Solvent less light oil based contact treatment compound counteracts oxidation.
More Details
$6.95
Silicone Rubber Adhesive Sealant, IS-808, Translucent
Momentive IS-808 translucent adhesive.
More Details
$9.95
Solder, Kester 48, lead-free 1Lb spool
(96.5% Tin, 3% Silver,.5% Copper) -.05" Diameter, 1 lb Spool
More Details
$80.00
DeoxIT® Wipes (50), 100% solution, Caig
DeoxIT® Wipes, 100%, 50 individual wipes, zip-lock bag
More Details
$24.75
DeoxIT® Gold GN5 Mini Spray, Caig
Contact cleaner, conditioner, enhancer, lubricant and protectant for PLATED metal surfaces. Improves conductivity, maintains optimum signal quality, reduces fretting & dendrite corrosion, and stabilizes connections between similar and dissimilar metals. DeoxIT® GOLD also reduces wear and abrasion, arcing, RFI and intermittent connections and improves connector performance/reliability. Ideal for gold plated surfaces. On oxidized surfaces, pre-treat with DeoxIit contact cleaner. Temperature range: -45 to +240°C. May be shipped by air (up to 36 units).
More Details
$9.95
Lint-free Cotton Cloth (50), Caig
Lint-Free Cloth, cotton, 2.25" x 4.5", package of 50.
More Details
$7.85
Big Bath
All purpose degreaser and cleaner for electrical contacts, switches, PC boards and components. Evaporates instantly and leaves no residue.
More Details
$24.95
DeoxIT® Shield SN5 Spray, Caig
DeoxIT® SHIELD S5 Spray (formerly PreservIT P5S-6), 5% solution, flushing action, 142 g, (Applications = 1200 ±). Seals, lubricates and protects metal surfaces against oxidation and contamination. Use on clean/new surfaces or those precleaned with DeoxIT® D-Series contact cleaner.
More Details
$22.45
DeoxIT® Emergency Survival Kit, Caig
Caig DeoxIT® Emergency Survival Kit Includes: DeoxIT® DN5MS-15 Spray, 5%, (Applications = 150 ±) DeoxIT® D100P, Pen, 100% DeoxIT® D100L-2C, Squeeze Tube, 100% DeoxIT® D1W, individual wipes, three each Lint-free swabs, brushes and cloths Zip-lock pouch
More Details
$19.65
Connector Cleaning Brushes (100), Caig
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 100
More Details
$27.50
DeoxIT® Gold G100 Spray, Caig
Unique contact cleaner, conditioner, enhancer, lubricant and protectant for PLATED metal surfaces. Improves conductivity, maintains optimum signal quality, reduces fretting & dendrite corrosion, and stabilizes connections between similar and dissimilar metals. DeoxIT® GOLD also reduces wear and abrasion, arcing, RFI and intermittent connections and improves connector performance/reliability. Ideal for gold plated surfaces. On oxidized surfaces,pre-treat with DeoxIT® contact cleaner. Cannot ship by Air or Mail. Must ship UPS ground.
More Details
$22.00
DeoxIT® Shield squeeze tube, Caig
DeoxIT® SHIELD S100L (formerly PreservIT P100L-2C) Squeeze Tube, 100% solution, 2 mL, (Applications = 50 ± drops, 0.04 ml/drop.
More Details
$4.70
DeoxIT® L260NP Grease, Caig
Lithium-based preparation. Good lubrication, excellent wear resistance, excellent pressure resistance, excellent oxidation (galvanic corrosion) protection, high dripping-point characteristics. Operating temperatures: -40°C to 260°C.
More Details
$23.60
Precision Swabs (100), Caig
Precision Swabs, Foam, 1/4 x 3/4 x 4-1/2", package of 100.
More Details
$39.35
DeoxIT® M260Cp Grease, copper particles, Caig
DeoxIT® M260Cp Grease (formerly CaiLube), copper particles, 226 g, jar. Manufactured in semi-solid form for use as a combination cleaning, deoxidizing, protecting and lubricating preparation. Greases protect against oxidation (galvanic corrosion) and are free of mineral acids, sulphurs, alkalis and other noxious components aggressive to metals. DeoxIT7 Greases improve performance of electrical contacts and mechanical components that require precise lubrication.
More Details
$24.50
DeoxIT® Grease M260NP, Caig
DeoxIT® L260Np Grease (formerly CaiLube), no particles, 28 gram jar
More Details
$8.60
DeoxIT® Shield, Brush Applicator, Caig
DeoxIT® Shield S100L Brush Applicator (formerly PreservIT P100L-2DB), 100% solution, 7.4 mL, (Applications = 500 ± brush strokes, 10mm long).
More Details
$15.70
Mechanicall Spray, Caig
20% Adjustable Value, 9 oz, 255 g Concentrated formula for superior lubrication and long-lasting protection from corrosion. Superior Lubrication & Protection Penetrates & Displaces Moisture Dissolves Corrosion Stops Squeaks Frees Sticky Mechanisms Excellent Migration (spreading) Properties Extremely Cost Effective - Smaller Amount Required Will Not Dry Out Prevents Tarnishing Seals and Protects Even Hard-to-Protect Metal Parts and Mechanisms
More Details
$6.25
DeoxIT® Gold Individual Wipes (25), Caig
DeoxIT® GOLD Wipes (formerly ProGold), 100%, 25 individual wipes, clamshell.
More Details
$17.50
Solder - .031" Kester 48, Flux 66, Lead-free 1 lb Spool
Lead free solder, Sn96.5Ag3.0Cu0.5, 031" diameter, rosin flux, core 66.
More Details
$80.00
Poster, Color Code Chart
25" x 38" reprint of RMA color code chart showing standard colors for resistors, capacitors, transformer leads and more. See the attached file download for a detailed look at the poster's content.
More Details
$9.95
Tool - Cruz Tools, GrooveTech Truss Rod Driver, Standard
Tool - Cruz Tools, GrooveTech Truss Rod Driver, Standard
More Details
$11.95
Pliers - Xcelite, 5" Ignition with Red Cushion Grip Handles
Features: Ignition pliers Narrow jaw for close work. 3-jaw opening adjustment to ½". Forged alloy steel construction. Red plastic-coated cushion grip provides maximum leverage.
More Details
$17.95
Tool - Helping Hand with Magnifier, 65mm, 2.5X
Magnifier with 2 ½" lens. Both clamps and magnifier can be removed. Great for precision work on circuit boards, solders and repairs. 6 ball joints for any angle. Simple to adjust thumb screws. Nickel plating fittings. Sturdy iron cast base. Alligator spring clips
More Details
$5.95
Caig - Deoxit Rosin Soldering Flux
Recommended for electrical and electronic soldering applications.
More Details
$8.25
Tool - Vacuum Base Vise, 40mm
Mini vise perfect for work on tube bases.
More Details
$5.95
Replacement Springs for Xcelite CN255V
Replacement springs for S-TCN225.
More Details
$1.00
Heat Shrink - General Purpose, Black, sold per yard
Heat Shrink - General Purpose, Black, sold per yard
More Details
$0.45
Tool - Cruz Tools, GrooveTech Truss Rod Driver, Cheater
Tool - Cruz Tools, GrooveTech Truss Rod Driver, Cheater
More Details
$11.95
Diamond Fret File For Medium And Wide Fretwire - 150 and 300 Grit
Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.
More Details
$95.00
Novus Plastic Polish #1, 2 oz
Cleans and glazes plastic surface to resist finger markings, dust build-up and is anti-static.
More Details
$2.75
Wire - Hook-Up, Lacquered, 25' Spool, Yellow
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, yellow.
More Details
$7.50
Hex Tool- Double End .125"
Molded from Delrin, 5 3/32 long. Ends are .125 hex with .10" wide by .02" thick plastic screw driver on one end.
More Details
$1.95
Cement - Service
A quick-drying, waterproof celar adhesive which forms a strong vibration resistant bond. Ideal for speaker repairs and bonding semi-porus materials to each other or to metalsm plastics, etc. 2 oz. bottle.
More Details
$7.95
Wire - NiChrome, 35 AWG, 20' Minimum per Order!!!!!!
Use for making wirewound resistors, small heater elements, or repairing filament potentiometers. 20.80 ohms/ft, 35 gauge. 105°C temperature rating, 600V.
More Details
$0.10
Bevel Diamond Fret File, 200 grit
See S-T229-400 for 400 grit file.
More Details
$23.95
Sleeving, 3/4" Expando Mesh, Sold by the foot
More Details
$0.75
Wire - Magnet, 28 Gauge, 200'
Insulated with two coats of enamel. Perfect for winding coils or transformers. 28 gauge, 200 foot. 105°C temperature rating, 600V.
More Details
$7.95
Wire - Magnet 36 Gauge 750' spool
Insulated with two coats of enamel. Perfect for winding coils or transformers. 36 gauge, 750 foot spool. 105°C temperature rating, 600V.
More Details
$6.95
Novus Plastic Polish #2, 2 oz
Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. For best results, follow with Novus No. 1 polish.
More Details
$3.10
Wire - Hook-Up, Lacquered, 25' Spool, White, 600 Volt
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, white. 105°C temperature rating, 600V.
More Details
$7.50
Alignment Kit, Assorted Hex and Flat Tools
Assorted hex and flat tools for alignment work.
More Details
$0.95
Color Bond Refinisher, Black, for Plastic, Leather, and Vinyl
Color Bond leather, vinyl & hard plastic black refinisher. Proprietary formula penetrates surface and molecularly bonds to permanently seal in the color. Great for tolex. Prepare upholstery for refinishing with Color Bond's Prep Cleaner.
More Details
$16.00
Radio-TV Service Solvent, 2 oz
Quick acting solvent for use in speaker repair. Can be used as lacque thinner, two ounces.
More Details
$6.50
Wire - Hook-Up, Lacquered, 25 Spool, Orange
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, orange. 105°C temperature rating, 600V.
More Details
$7.50
Bevel Diamond Fret File, 400 grit
See S-T229-200 for 200 grit file.
More Details
$23.95
Heat Shrink - Assorted Diameters, 23 pieces, 6" each
Shrinks to half its original size when heated by heat gun, soldering iron or just a match. Use for insulating terminals, connectors and wire splices. Assorted, quantity of 23.
More Details
$4.50
Wire - Magnet, 32 Gauge, 400'
Insulated with two coats of enamel. Perfect for winding coils or transformers. 32 gauge, 400 foot. 105°C temperature rating, 600V.
More Details
$7.95
Wire - Magnet, 42 AWG, 750' spool
Insulated with two coats of enamel. Perfect for winding coils or transformers. 42 gauge, 750 foot spool. 105°C temperature rating, 600V.
More Details
$6.95
Rubber Renue, 1 oz
Cleans and revitalizes rubber. Deglazes hardened rubber hoses, drive wheels and belts. Gives racing model tires more grip.
More Details
$7.95
Wire - Hook-Up, Lacquered, 25' Spool, Brown
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, brown. 105°C temperature rating, 600V.
More Details
$7.50
Burnishing Tool, 1/4" Wide
Stainless steel strip, microscored to an ultrafine file surface. Remove oxide and corrosion on contacts made of platinum, paladium, moybdenum, gold, tungsten, and silver.
More Details
$2.50
Color Bond Prep Cleaner
4 oz. of cleaner that mixes with a gallon of water to prepare upholstery for use with Color Bond's refinisher for plastic, leather, and vinyl.
More Details
$7.00
Q Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
More Details
$9.85
Wire - Hook-Up, Lacquered, 25 Spool, Black, 600 Volt
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, black. 105°C temperature rating, 600V.
More Details
$7.50
Fish Paper
Gray insulating paper .010 thickused in switchesunder terminalsin transformersetc.where mechanical strength is required. Dielectric strength 3000 volts. 9" wide roll contains 250 sq. inches.
More Details
$5.25
Wire - Bus, #20, 100' Spool
#20 solid tinned coper bus wire. 105°C temperature rating, 600V.
More Details
$7.95
Wire - Magnet, 40 Gauge, 750' spool
Insulated with two coats of enamel. Perfect for winding coils or transformers. 40 gauge, 750 foot spool. 105°C temperature rating, 600V.
More Details
$6.95
Micro-Mesh Plastic Restorer
The most efficient system available for removing scratches and haziness from plastic radio cabinets and clear dial windows. Each kit contains 5 pieces of 3 x 6 Micro-Mesh cushioned abrasive cloth ranging from coarse to ultra-finefoam sanding block3 oz. bottle of Micro-Gloss liquid abrasive and a soft buffing cloth. 8 oz.
More Details
$24.95
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, Orange,
#20 solid copper wire with modern insulation and lacquered cotton braid finish. Various length spools, orange. 105°C temperature rating, 600V.
More Details
Wire - 18 Gauge Braided Power Cord - 20 ft
Brown 2 conductor 18 gauge, stranded power cord, similar to woven cloth covered cords in early AC radios. 105°C temperature rating, 600V.
More Details
$25.00
Silicone Heat Sink Compound, Type Z9, 1 FL oz
Type Z9, 1 fluid ounce.
More Details
$6.25
Wire - Hook-Up, Lacquered, 25' Spool, Red, 600 Volt
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, red. 105°C temperature rating, 600V.
More Details
$7.50
Alignment Kit - CB
Contains 5009 Duplex no-metal screwdriver, 5097 K-tran tool, 8271 core aligner, 8282 Zenith alignment tool, 9091 hex iron core tool, 9440 transistor tool, 8276 Duplex aligner and 9304 double end tool.
More Details
$10.25
Corona Dope, 2 oz.
Fast-drying black lacquer coating. High quality dielectric, arc and corona resisting properties.
More Details
$9.50
Solder - Kester, 60/40, 44 Flux, 66 Core, .031 Dia, .5 OZ
Kester 44 60/40 rosin core type. .031" diameter, 0.5 oz
More Details
$5.50
Wire - NiChrome, 26 AWG, 20' Minimum per Order!!!!!!
Use for making wirewound resistors, small heater elements, or repairing filament potentiometers. 2.57 ohms/ft, 26 gauge. 105°C temperature rating, 600V.
More Details
$0.10
Polish, Magnolia Glayzit, Restores Bakelite
For restoration of Bakelite. A siliconized polish that restore Bakelite with its blend of premium wax and oil.
More Details
$14.50
Wire - Magnet, 21 Gauge, 100'
Insulated with two coats of enamel. Perfect for winding coils or transformers. 21 Gauge, 100 foot spool. 105°C temperature rating, 600V.
More Details
$6.95
Wire - #26 Celanese Covered, 20 ft Minimum per Order!!!!!!
White celanese covered wire, resembling early cotton covered wire, may be color dyed. Cotton wrap, #26 magnet wire. 20 foot minimum. 105°C temperature rating, 600V.
More Details
$0.15
Belt and Drive Non-Slip
Prevents slippage and restores proper functions on belts and drive wheels in turntables and tape recorders, especially where the rubber has hardened or become slick. 2 oz jar.
More Details
$7.95
Wire - Hook-Up, Lacquered, 25' Spool, Blue
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, blue. 105°C temperature rating, 600V.
More Details
$7.50
Aligner - Duplex
Butyrate shaft 6 1/8 long with 1/8" wide steel tips. Tip on one end recessed.
More Details
$1.95
Liquid Tape 2 oz
Heavy black coating used as insulating tape in applications where tape cannot be used.
More Details
$7.98
Wire - NiChrome, 28 AWG, 20' Minimum per Order!!!!!!
Use for making wirewound resistors, small heater elements, or repairing filament potentiometers. 4.09 ohms/ft, 28 gauge. 105°C temperature rating, 600V.
More Details
$0.10
Valve Tester - Orange, VT-1000
The compact and extremely easy to use VT1000 is a fully automatic valve tester, which performs a wide range of tests quickly and accurately. The benefits of using the VT1000 are clear and wide reaching; users can quickly and simply match and test valves, plus receive a reliable health check as to whether their valves are good, bad or worn. Orange Amps developed the world’s first fully automatic, portable, digital valve tester, the VT1000, to make it easy to test amp valves. Until now testing valves with little or no knowledge of valve theory was difficult, expensive and often unreliable. This new product will test all popular power and pre-amp valves. Its ease of use will appeal to all valve users whether amateur, professional or in the music retail trade. The unit has one octal and two nine pin valve sockets for different valve types; simply insert the valve to be tested into the correct socket, select the valve type from the list on the unit and press ‘OK’ to test. The results are displayed clearly and concisely using LEDs and will test for a wide range of fault conditions, which could easily cause damage to other components. The simplicity of operation belies what is going on ‘inside the box’, where a CPU controlled testing system is in operation, allowing full control over all inter-electrode switching and measurement operations. In approximately two minutes, the VT1000 performs an extensive series of tests including: Heater filament test: Short circuit · Heater filament test: Open circuit · Heater filament test: Tolerance check · Heater cathode insulation: Leakage · Heater cathode insulation: Short Circuit · Tests for heater current abnormalities · Amplification factor · Voltage gain · Power gain · Screen grid test · Mutual conductance test · Dual test for double triodes · Emission · Inter electrode leakage · Inter electrode short circuit · Flash-over (arc detection, high voltage breakdown) · More...
More Details
$499.00
Novus Polish - Set of each of 2 oz Size
Package deal of Novus #1, #2, and #3 polishes. Each bottle is 2 ounces.
More Details
$9.10
Wire - Magnet, 22 Gauge, 100'
Insulated with two coats of enamel. Perfect for winding coils or transformers. 22 gauge, 100 foot. 105°C temperature rating, 600V.
More Details
$6.95
Wire - Square Bus, .064" Diameter, per 10 ft (10 feet)
#12 AWG square tinned copper. Sold in 10 foot lengths. 105°C temperature rating, 600V.
More Details
$3.25
Novus Plastic Polish #3, 2 oz
Removes scratches from acrylic surfaces. More abrasive than Novus #2. effective for deeper scratches. Treatment must be followed by Novus #2 to buff and polish surface.
More Details
$3.75
Wire - Hook-Up, Lacquered, 25' Spool, Green, 600 Volt
#20 stranded copper wire with modern insulation and lacquered cotton braid finish. Provides safety and authentic vintage look. 25 foot spool, green. 105°C temperature rating, 600V.
More Details
$7.50
Alignment Kit
Contains 5 different tools for all standard adjustments. Includes extend-it" for long reaches. Tools are Delrin packaged in pocket-saver pouch. Tools are: 8282 Zenith type8606 Hex wrench9091 Hex core tooland 9304 double ended tool.
More Details
$7.95
White Lithium Grease
White calcium base grease lubricant. Good for use on wiping contacts and sliding parts. Will not oxidize or harden. 1-3/4 oz tube.
More Details
$5.95
Wire - NiChrome, 30 AWG, 20' Minimum per Order!!!
Use for making wirewound resistors, small heater elements, or repairing filament potentiometers. 6.50 ohms/ft, 30 gauge. 105°C temperature rating, 600V.
More Details
$0.10
Clip, Alligator, Black, package of 10 (Package of 10)
Will accept bare wire or standard banana plugs. Insulated barrel, box/10
More Details
$1.00
Wire - Magnet, 24 Gauge, 200'
Insulated with two coats of enamel. Perfect for winding coils or transformers. 24 gauge, 200 foot. 105°C temperature rating, 600V.
More Details
$7.95
Wire, #24 Celanese Covered,
White celanese covered wire, resembling early cotton covered wire, may be color dyed. Cotton wrap, #24 magnet wire. 20 foot minimum.
More Details
$0.15
A minimum order of at least 20 is required.
  • Sort:
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • View All (33 pages)