You are here

Transformers & Chokes

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(26 pages)
S-H135S-H135Item ID: 005717Form - Ceramic, 2-1/2" x 1/2" Diameter, 6-32 Threads
Use as a standoff or coil/choke form.
Read More...
$0.20
$0.18
P-C208RP-C208RItem ID: 005491Transformer - IF, 455 KC Red Cap, Detector
455 kHZ
Read More...
$0.50
$0.45
P-C1536XP-C1536XItem ID: 005489Choke - 0.17 - 250, Heavy Duty Hash Choke
Molded powdered iron core. 1-1/4 long axial leads. High inductance & high current. L measured at 1 Khz. Inductance: 250 µH20% tolerance DC resistance ohms: .17 Self Resonant Frequency (MHz): 1.5 Maximum DC current amps: 2.5 Coil diameter (in): .43 Core Length (in): 1.25
Read More...
$1.75
$1.58
P-T42TM022P-T42TM022Item ID: 009480Audio and Signal Transformer
Primary: 1500 ohms center tapped. Secondary: 600 ohms center tapped.
Read More...
$2.25
$2.03
P-C1535BP-C1535BItem ID: 005485RF Choke - 2.5 mH, Hammond
Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 2.5 mH5% tolerance Q (min): 106 Test Frequency (KHz): 250 Self Resonant Min. Frequency (MHz): 1.3 Maximum DC current resistance (Ohms): 9 Maximum DC current (mA): 160 Coil diameter (in): .469 Core Length (in): .875 Core Material: Ferrite
Read More...
$4.50
$4.05
P-C1535DItem ID: 005486RF Choke - 5 mH, Hammond
Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 5 mH5% tolerance Q (min): 91 Test Frequency (KHz): 250 Self Resonant Min. Frequency (MHz): 1 Maximum DC current resistance (Ohms): 14 Maximum DC current (mA): 160 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite
Read More...
$4.65
$4.19
P-C1535GItem ID: 005487RF Choke - 10 mH, Hammond
Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 10 mH5% tolerance Q (min): 108 Test Frequency (KHz): 79 Self Resonant Min. Frequency (MHz): 0.71 Maximum DC current resistance (Ohms): 31 Maximum DC current (mA): 100 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite
Read More...
$5.10
$4.59
P-C1535JItem ID: 005488RF Choke - 25 mH, Hammond
Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 25 mH5% tolerance Q (min): 102 Test Frequency (KHz): 79 Self Resonant Min. Frequency (MHz): 0.33 Maximum DC current resistance (Ohms): 127 Maximum DC current (mA): 65 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite
Read More...
$5.25
$4.73
P-TF37099P-TF37099Item ID: 003600Transformer - Original Fender, Reverb, for Pro Reverb
Original Fender® reverb driver for Pro Reverb. Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
Read More...
$7.95
$7.16
P-T154MItem ID: 005573Filter Choke - Hammond, Open Bracket, 2 H, 100 mA
Specifications Rating: 2 Henries, 100 mA Max. VDC: 300 Resistance: 175 ohms Mounting centers: 1.75 u-frame Weight: 0.3 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.
Read More...
$12.25
$11.03

Pages

(26 pages)
Subscribe to RSS - Transformers & Chokes