[Skip to content]

Transformers & Chokes

Transformer - Hammond, Filament, 6.3 VCT, 2 A
Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 6.3 VCT, 2 A Mounting Centers: 2-3/8", u-bracket
More Details
$17.30
Transformer - Hammond, Filament, 6.3 VCT, 6 A
Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 6.3 VCT, 6 A Mounting Centers: 3-1/8", u-bracket
More Details
$25.95
Transformer - Hammond, Output, Replacement for Fender
Equivalent to #022855, #125A9A - 2 Ohms. Concert, Superb Reverb, Tweed Bassman. Warning: Not all amplifier models of the same name use the same transformer model. Please make sure the amplifier transformer which you are replacing has a Fender number matching the equivalent Fender transformer number listed here.
More Details
$75.75
Transformer - Hammond, Output, Push-Pull, 60 W
Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 60 W Primary Impedance 4,300 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 318 mA Mounting Centers 2.5" x 2.94"
More Details
$130.77
Transformer - Hammond, Filament, 12.6 VCT, 4 A
Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 12.6 VCT, 4 A Mounting Centers: 3-1/8", u-bracket
More Details
$20.75
Transformer - Hammond, Output, Push-Pull, 280 W
Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 280 W Primary Impedance 1,900 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 806 mA Mounting Centers 3.5" x 5.88"
More Details
$338.46
Transformer - One Electron, Output, 1600 to 16/8/4
The UBT-1 from One Electron is a low- impedance single-ended output transformer intended for parallel combinations of tubes running a B+ voltages of 250 to 325 volts, such as: two or three EL34s(triode connected), three 2A3s, two 300Bs, two 6AS7s, etc., as well as single sweep tubes run in 'enhanced-triode' mode, resulting in 10 to 15 watts of output power. The UBT-1s low impedance gives an exceptionally broad frequency range of 10Hz to over 75 KHz (at 1 watt). This transformer has been the basis for excellent-sounding single-ended amps, and is notable for its clean, detailed sound.
More Details
$99.95
Transformer - Hammond, Output, Single-Ended, 30 W
Over designed for single ended tube output circuits (triode, tetrode or pentode tubes). Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref. 1 Khz). Insulated flexible leads 8" min. Includes a 40% screen tap for Ultra-Linear operation (if desired). High quality laminations, (M6) grain oriented silicon steel. Core is gapped to reduce core saturation in Class-A circuits. For general purpose or replacement use in single ended tube output circuits see our P-T125SE series. Specifications
More Details
$152.31