 | Transformer - Audio Interstage, Hammond, 12 Watt Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e. seperate primary and secondary) Primary: 600 Ohm (with 6" wire leads) Secondary: 8 Ohm with 4 Ohm center tap (with solder lugs) Power: Rated at 12 watts Frequency Response: 30 Hz - 20 kHz Weight: 1.3 lbs. | $26.20 More Details |
 | Transformer - Hammond, Power, 260-0-260 V, 90 mA Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 260-0-260 V90 mA Filament winding: 6.3 V3.5 A Mounting centers: 2.25" x 2.88"horizontal Weight: 3.8 lbs. | $59.64 More Details |
 | Transformer - Hammond, Output, Single-Ended, 30 W New and improved version, higher power handling smoother frequency response, easy to use secondary tap. Over designed for single ended tube output circuits (triode, tetrode or pentode tubes). Enclosed (shielded), 4 slot, above chassis Type X" mounting. Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref. 1 Khz.) Insulated flexible leads 8" min. Includes a 40% screen tap for Ultra-Linear operation (if desired). High quality laminations(M6) grain oriented silicon steel | $152.31 More Details |
 | Transformer - Hammond, Universal Single Ended, 20 W, 90 mA | $81.54 More Details |
| RF Choke - 5 mH, Hammond Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 5 mH5% tolerance Q (min): 91 Test Frequency (KHz): 250 Self Resonant Min. Frequency (MHz): 1 Maximum DC current resistance (Ohms): 14 Maximum DC current (mA): 160 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite | $4.65 More Details |
| Transformer - Hammond, Line Isolation, 100 VA Hammond 171 Series Line Isolation Plug & Receptacle Transformer 100 VA capacity. Primary 115 VAC, 50/60 Hz. Secondary 115 VAC Provides circuit isolation. Electrostatic shield between primary & secondary Standard 3-wire, grounded plug and receptacle. 5 foot U ground" cord & plug. CSA certified (# LR3902) 3" x 3.88" mounting centers 7.2 lbs | $80.55 More Details |
| Filter Choke - Hammond, Open Bracket, 15 H, 30 MA Specifications Rating: 15 Henries, 30 mA Max. VDC: 400 Resistance: 1,026 ohms Mounting centers: 2 u-frame Weight: 0.3 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering. | $15.40 More Details |
 | Transformer - Hammond, Power, 400-0-400 V, 465 mA Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Windings are concentric wound for low stray field and low noise Secondary: 400-0-400 V, 465 mA Filament winding : 6.3 VCT, 6 A Mounting centers: 3.5 x 4" vertical mount Weight: 17.6 lbs. | $173.66 More Details |
