Replacement reverb driver for Deluxe Reverb, Pro Reverb, Super Reverb, and Twin Reverb. 8 ohms, equivalent to #125A20B & #022921. Specifications Audio Watts (RMS): 3.5 Primary Impedance (Ohms): 25,000 Secondary Impedance (Ohms): 8 Mounting centers: 1.75" Weight: .38 lbs

Replacement for Princeton, Princeton Reverb, Champ, Vibro-Champ, and Tweed Deluxe. Equivalent to #125P1B & #022772. Specifications Primary 117 V, 60 Hz Secondary 325-0-325 V, 375 VDC @ 70 mA(DC) Filament Winding 6.3 V, 2 A Rectifier Filament 5 V, 2 A Mounting Centers 2" x 2.5" Mounting Type Horizontal Weight 2.9 lbs

Equivalent to 022699, 125C1A, inductance = 4 H, 90mA(DC). for Bandmaster, Bassman, Concert, Dual Showman, Pro Reverb, Super Reverb, Twin Reverb.

Equivalent to #125P1B and #022772 for Champ, Vibro Champ, Princeton, Princeton Reverb.

Equivalent to 022707, 125C3A 50mA/167 ohms. for Deluxe, Vibrolux, stand alone reverbs, late Tremolux.

Replacement filter choke for Marshall JCM800s.

Equivalent to #125P23D and #041316 for Deluxe, Deluxe Reverb. Does not work for the Re-Issue '65 Deluxe.

For stand alone 1963 Fender® Reverb - Made in USA. Rating: 306 VDC @ 27mADC, 240 VAC @ 27mA, 6.6V @ 1.05A 2.86" vertical mounting centers

Fender Original Hot Rod Deluxe output transformer. 40 watts. Equivalent to #050438. Specifications Audio 40 W (RMS) Primary Impedance 4,250 Ω Secondary Impedance 4/8 Ω Mounting Centers 2" x 2.2" Mounting Type Vertical Weight 3.4 lbs

Specifications Rating: 5 Henries, 50 mA Max. VDC: 400 Resistance: 270 ohms Mounting centers: 2" u-frame Weight: 0.3 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 300-0-300 V, 150 mA Filament winding 1: 5 V, 3 A CT Filament winding 2: 6.3 V, 5 A CT Mounting centers: 2.5" x 2.19" vertical mount Weight: 5 lbs.

Equivalent to 125A13A, #022871 - 2,4,8 ohms Fender general replacement.

100 watt replacement power transformer for Marshall. Built to vintage specs with exact interleave ratios and materials. Great for upgrading later issue Marshall amps. Gives great classic sound. Good replacement for JMP and JCM800s. for EL34!

Specifications Rating: 9 Henries, 40 mA Max. VDC: 400 Resistance: 300 ohms Mounting centers: 2.38" u-frame Weight: 0.5 lbs.

For JCM 800. Made by Hammond. Mounting Centers: 1.875" x 1.845" Weight: 2.3 lbs

Replacement for Marshall JCM900, 100 watts - 2,4,8, 16 ohms.

Replacement for Fender Vibrolux and Tremolux Blackface AA763 (1963-1966). Equivalent to #125P26A & # 036483. 35 Watts. Specifications Primary 117 V, 60Hz Secondary 325-0-325 V, 365 VDC @ 180 mA(DC) with 50 V bias tap Filament Winding 6.3 V, 4 A Rectifier Filament 5 V, 3 A Mounting Centers 2.5" x 3.125" Weight 6.5 lbs

Equivalent to 022798 and 125P5D. for Bandmaster, Pro Reverb, Super Reverb, Tweed Bassman, Vibroverb.

Replacement for Pro Reverb, Tremolux, Vibrolux, Bandmaster, and Vibroverb, 4 ohms. Equivalent to #125A6A & #022848. Specifications Audio Watts 35 W (RMS) Primary Impedance 4,000 CT Ω Secondary Impedance 4 Ω Mounting Centers 3.5" Mounting Type Vertical Weight 2.4 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 275-0-275 V, 125 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 4 A Mounting centers: 2" x 2.69" vertical mount

Specifications Rating: 5 Henries, 300 mA Max. VDC: 800 Resistance: 57 ohms Mounting centers: 2.4375" x 2.5" vertical mount Weight: 5.5 lbs. Enclosed, 4-hole mounted chokes. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 8" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering; case matches Hammond power transformers & tube audio output transformers.

Genuine Marshall™ filter choke. for JCM800.

Equivalent to 125P7D and 022814 for Bassman, Concert, Pro (no filament CT).

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 190-0-190 V, 65 mA Filament winding: 6.3 V, 2.5 A Mounting centers: 1.75" x 1.56" vertical mount Weight: 1.8 lbs.

Specifications Rating: 15 Henries, 100 mA Max. VDC: 500 Resistance: 256 ohms Mounting centers: 3.56" u-frame Weight: 2.25 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Specifications Rating: 30 Henries, 40 mA Max. VDC: 400 Resistance: 595 ohms Mounting centers: 2.81" u-frame Weight: 1 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 300-0-300 V, 100 mA Filament winding 1: 5 V, 2 A Filament winding 2: 6.3 V, 3 A Mounting centers: 2" x 2.19" vertical mount Weight: 3.5 lbs.

This audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes. It uses the same high quality M6 laminations as the UBT transfomers. Has two identical windings allowing series and parallel combinations. Connection Inductance DC Current Resistance Impedance parallel 5.5H 230mA 32 1K series 22H 115mA 128 4K

Specifications Rating: 150 Henries, 8 mA Max. VDC: 400 Resistance: 3,700 ohms Mounting centers: 2.38" u-frame Weight: 0.5 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Specifications Rating: 10 Henries, 500 mA Max. VDC: 1000 Resistance: 53 ohms Mounting centers: 4.31" x 3" vert. Weight: 21 lbs.

Specifications Rating: 20 Henries, 100 mA Max. VDC: 600 Resistance: 181 ohms Mounting centers: 2" x 2.1875" vertical mount Weight: 3.3 lbs. Enclosed, 4-hole mounted chokes. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 8" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering; case matches Hammond power transformers & tube audio output transformers.

Equivalent to 125P7D and 022814 for Bassman, Concert, Pro (no filament CT).

Equivalent to #125A13A, #022871 - 4 ohms for Fender Bassman.

Original Fender® reverb driver for Pro Reverb.

Specifications Rating: 8 Henries, 150 mA Max. VDC: 600 Resistance: 75 ohms Mounting centers: 2.5" x 2.1875" vertical mount Weight: 3.3 lbs. Enclosed, 4-hole mounted chokes. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 8" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering; case matches Hammond power transformers & tube audio output transformers.

240 volts, equivalent to #125P1B and #022772 for Champ, Vibro Champ, Princeton, Princeton Reverb, Tweed Deluxe.

Specifications Rating: 6 mH, 2 A Max. VDC: 400 Resistance: 0.3 ohms Mounting centers: 2" u-frame Weight: 0.3 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Dual primary 115 VAC, 125 VAC, 60 Hz. Designed for small power or bias supplies, test equipment, preamps etc. Economical , 2 hole channel bracket, chassis mount. Minimum 5" long leads. Secondary: 250 VCT, 130 mA Filament winding: 6.3 V, 2 A Mounting centers: 3.56" u-bracket Weight: 2 lbs.

Specifications Rating: 2.6 Henries, 300 mA Max. VDC: 800 Resistance: 21 ohms Mounting centers: 2" x 2.19" vertical mount Weight: 3.25 lbs.

240 Volts, equivalent to 022798 and 125P5D. for Bandmaster, Pro Reverb, Super Reverb, Tweed Bassman, Vibroverb.

Replacement for Fender Bassman, Concert, and Pro. Equivalent to #125P7D & #022814. 50 Watts. Specifications Primary 117 V, 60 Hz Secondary 330-0-330 V, 420 VDC @ 240 mA(DC) with 53 V bias tap Filament Winding 6.5 V, 3.15 A Mounting Centers 2.75" x 3.5" Mounting Type Horizontal Weight 7.3 lbs

Equivalent to 022723, 125P26A, for Vibrolux, Vibrolux Reverb, Tremolux

Genuine Vox filter choke for vintage AC30.

For Vox 15.

Fender® Original '59 Bassman Reissue output transformer. 50 watts. Equivalent to #036485. Specifications Audio 50 W (RMS) Secondary Impedance 2 Ω Mounting Centers 3.5" x 2" Mounting Type Vertical Weight 4.8 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 350-0-350 V, 175 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 5 A Mounting centers: 2.5" x 2.69" vertical mount Weight: 6.1 lbs.

For JTM45, horizontal mount.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers. Class A insulation (105 degrees C). Hi-Pot tested to 2,500 V RMS. Windings are concentric wound for low stray field and low noise. Secondary: 275-0-275 V, 50 mA Filament winding 1 : 5 VCT, 2 A Filament winding 2 : 6.3 VCT, 2 A Mounting centers: 2" x 1.94" vertical mount Weight: 3.1 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 275-0-275 V, 150 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 5 A Mounting centers: 2.5" x 2.19" vertical mount Weight: 4.75 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 250-0-250 V, 60 mA Filament winding: 6.3 V, 2.5 A Mounting centers: 1.75" x 1.56" vertical mount Weight: 1.8 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Designed for small power or bias supplies, test equipment, preamps etc. Economical, 2 hole channel bracket, chassis mount. Minimum 5" long leads. Filament winding: 6.3 V, 1 A Mounting centers: 2.81" u-bracket Weight: 1 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 400-0-400 V, 200 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 6 A Mounting centers: 2.5" x 2.69" vertical mount Weight: 7 lbs.

Wattage: 50W Max Primary Impedance: 3800 ohms CT S Secondary Impedance: 4-8-16 ohms

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 10 W Primary Impedance 8,000 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 100 mA Mounting Centers 1.69" x 2" Mount Type

Replacement for Yorkville/Traynor, 100 watts - 4, 8, 16 ohm.

Replacement for Vox AC30 reissue, 30 watts - 8, 16 ohms.

Fender Original Blues Junior output transformer. 15 watts. Equivalent to #049969.

Replacement for Bassman heads, 4 ohms. Equivalent to #125A13A & #022871. Specifications Audio Watts (RMS): 50 Primary Impedance (Ohms): 4,200 CT Secondary Impedance (Ohms): 4 Mounting centers: 2" x 3.5" vertical Weight: 4.5 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 300-0-300 V, 250 mA Filament winding 1: 5 V, 4 A CT Filament winding 2: 6.3 V, 8 A CT Mounting centers: 3" x 2.81" vertical mount Weight: 7.6 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 375-0-375 V, 175 mA Filament winding 1: 5 V, 3 A CT Filament winding 2: 6.3 V, 6 A CT Mounting centers: 2.5" x 2.69" vertical mount Weight: 6.1 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. Input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 275-0-275 V, 230 mA Filament winding 1: 5 V, 3 A CT Filament winding 2: 6.3 V, 6 A CT Mounting centers: 2.5" x 2.69" vertical mount Weight: 5.9 lbs.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers. Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Secondary: 300-0-300 V, 100 mA Filament winding 1 : 5 VCT, 2 A Filament winding 2 : 6.3 VCT, 3 A Mounting centers: 2.5" x 2.19" vertical mount Weight: 4.8 lbs.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers. Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Rating: 300-0-300 V, 250 mA Filament winding 1 : 5 VCT, 4 A Filament winding 2 : 6.3 VCT, 8 A Mounting centers: 3.31" x 3.0" vertical mount Weight: 10 lbs.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Secondary: 300-0-300 V, 150 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 5 A Mounting centers: 2.5" x 2.94" vertical mount Weight: 6.2 lbs.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers. Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Secondary: 375-0-375 V, 175 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 6 A Mounting centers: 3" x 2.81" vertical mount Weight: 7.9 lbs.

Equivalent to #022899,#12529A - 4 Ohms. for Bassman, Dual Showman, 100 Twin Reverb.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 310-0-310 V, 70 mA Filament winding 1: 5 V, 2 A Filament winding 2: 6.3 V, 8 A

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers. Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Secondary: 275-0-275 V, 150 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 5 A Mounting centers: 2.5" x 2.94" vertical mount Weight: 6.2 lbs.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers. Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Secondary: 275-0-275 V, 200 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 6 A Mounting centers: 2.5" x 2.94" vertical mount

Specifications Primary 117 V, 50/60 Hz Secondary 125 V, 15 mA Filament Winding 12.6V, 0.3 A Mounting Centers 2" Mounting Type U-bracket Weight 0.7 lbs

For JMP/JCM800, 100 watts.

Specifications Output 8 W Primary Impedance 4,000 to 10,000 Ω Mounting Centers 2.375" Weight 0.7 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 125-0-125 V, 100 mA Filament winding: 6.3 V, 2 A Mounting centers: 1.75" x 1.44" vertical mount Weight: 1.7 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 275-0-275V, 50 mA Filament winding 1: 5 V, 2 A Filament winding 2: 6.3 V, 1.5 A

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Windings are concentric wound for low stray field and low noise. Secondary: 125-0-125 V, 100 mA Filament winding: 6.3 VCT, 2 A Mounting centers: 2" x 1.69" vertical mount Weight: 2.6 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 100-0-100 V, 100 mA Filament winding: 5 V, 2 A Mounting centers: 1.5" x 1.56" vertical mount Weight: 1.5 lbs.

Genuine Marshall™ output transformer. for JCM900 and JCM2000.

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 6.3 VCT, 4 A Mounting Centers: 2.81", u-bracket

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 30 W Primary Impedance 5,500 CT Ω Secondary Impedance 4/8/16 Ω - 70V Maximum DC per side 128 mA Mounting Centers 2" x 2.69"

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 120 W Primary Impedance 1,900 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 128 mA Mounting Centers 3" x 3.31"

Used in RD-50/1650 RD amps. Model 8-50.

The UBT-3 from One Electron is the same size and power (15 watts) as the UBT-1, but has a primary impedance suitable for single or paralleled tubes running at B+ voltages of 300 to 400 volts, such as: 2A3, WE 300B, 50, etc. The frequency response is from 10 Hz to over 60KHz(at 1 watt). The 3K primary impedance offers lower distortion at only slightly less power in designs using the commonly- specified 2.5K transformers. Quantity discounts available. 6.1 lbs.

Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits. Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE). For push-pull output use, see P-T125A - optimized for push-pull tube output circuits. Open style with minimum 12" long primary & secondary leads leads. All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation.

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 6.3 VCT, 2 A Mounting Centers: 2-3/8", u-bracket

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 35 W Primary Impedance 6,600 CT Ω Secondary Impedance 3.5/8/16/250/500 Ω Maximum DC per side 200 mA Mounting Centers 2.25" x 2.5"

Equivalent to #022855, #125A9A - 2 Ohms. Concert, Superb Reverb, Tweed Bassman.

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 12.6 VCT, 4 A Mounting Centers: 3-1/8", u-bracket

Over designed for single ended tube output circuits (triode, tetrode or pentode tubes). Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref. 1 Khz). Insulated flexible leads 8" min. Includes a 40% screen tap for Ultra-Linear operation (if desired). High quality laminations, (M6) grain oriented silicon steel. Core is gapped to reduce core saturation in Class-A circuits. For general purpose or replacement use in single ended tube output circuits see our P-T125SE series. Specifications

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 25 W Primary Impedance 7,600 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 128 mA Mounting Centers 2" x 2.44" Mount Type

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 2.5 VCT, 3 A Mounting Centers: 2-3/8", u-bracket

Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits). Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz). Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections. Tables provided with transformer listing 90 pre-calculated impedance ratios. Specifications Audio Watts: 15 Max DC Bias (mA): 80 Primary Impedance (Ohms): 1,200 to 25,000 Secondary Impedance (Ohms): 1.5 to 15

Designed for general purpose or replacement use in push-pull tube output circuits. (For single ended use, see our 125 SE series - optimized for single ended tube output circuits). Frequency response: 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz). Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections. Tables provided with transformer listing 90 pre-calculated impedance ratios. Specifications Audio Watts: 3 Max DC Bias (mA): 25 Primary Impedance (Ohms): 1,200 to 25,000 Secondary Impedance (Ohms): 1.5 to 15 Mounting centers: 1.75" u-bracket

Primary 115 VAC, 60 Hz. Center tapped secondary. Open style, channel bracket, two hole chassis mount. Minimum 6" long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degrees, C). Hi-Pot test of 2,000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 2.5 VCT, 10 A Mounting Centers: 3-1/8", u-bracket

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 15 W Primary Impedance 5,000 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 100 mA Mounting Centers 1.69" x 2" Mount Type

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 50 W Primary Impedance 3,400 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 128 mA Mounting Centers 2.5" x 2.69"

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 40 W Primary Impedance 6,600 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 200 mA Mounting Centers 2.5" x 2.69" Mount Type Vertical Weight 6.5 lbs Suggested tube types: 6L6GC, 807, 5881, EL34 Cat. No. Dimensions (Inches) A B C D E ± 1/16" G Slot P-T1608 2.50 2.75 3.06 2.00 1.69 .203 x.38 P-T1608A 2.50 2.75 3.06 2.00 1.69 .203 x.38 P-T1609 2.50 2.75 3.06 2.00 1.69 .203 x.38 More...

The UBT-2 from One Electron is the same size and power(15 watts) as the UBT-1, but has a higher primary impedance suitable for single tubes running at B+ voltages of 400 to 500 volts, such as: 50, WE 300B,etc. The trade-off of a higher impedance transformer is worse bandwith, but additional interleaving was added in the UBT-2 to extend the frequency range from 10Hz to over 55 KHz (at 1 watt). The UBT-2 has also been successfully used as a choke load for shunt-feed output stages. Plate supply voltages over 600 volts are not recommended. Quantity discounts available. 6.0lbs.

Equivalent to Stancor A53-C. 1:3 ratio overall. Center tapped secondary may be used for push-pull grids. Specifications Max. Primary Current: 10 mA Impedance Primary to Secondary (Ohms): 10,000 to 90,000 Mounting centers: 2" Weight: 0.4 lbs.

Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits. Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE). For push-pull output use, see P-T125A - optimized for push-pull tube output circuits. Open style with minimum 12" long primary & secondary leads leads. All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation.

Genuine Vox output transformer for AC30 reissue.

Designed for general purpose or replacement use in single ended or phase inverter tube driver circuits. Open style with minimum 5" long primary leads. Minimum frequency response 150 Hz. - 13.5 Khz (± 1db max. ref. 1 Khz.) at full rated power. Specifications Audio Watts: 5 Primary Impedance (Ohms): 15K CT Secondary Impedance (Ohms): 33.8K/135K Secondary Winding: Dual Laminations: Grain Oriented Steel Mounting Centers: 2-3/8" u-bracket

Designed for general purpose or replacement use in single ended or phase inverter tube driver circuits. Open style with minimum 5" long primary leads. Minimum frequency response 150 Hz - 15 Khz (± 1db max. ref. 1 Khz.) at full rated power. Specifications Audio Watts: 5 Primary Impedance (Ohms): 7K CT Secondary Impedance (Ohms): 15.8K CT Secondary Winding: C.T. Laminations: Grain Oriented Steel Weight: 0.6lbs Mounting Centers: 2.38" u-bracket

Includes: 3 pole, 3 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600A series transformers provide 'easy wire secondary' impedances of 4, 8, or 16 ohms. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary. (Not recommended for 1645A or 1650G)

Primary 115 VAC, 60 Hz. Center tapped secondary. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 5 VCT3 A Weight: 1.1 lbs Mounting Centers: 1.5" x 1.31"vertical

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 325-0-325 V40 mA Filament winding 1: 5 V2 A Filament winding 2: 6.3 V2 A Mounting centers:2" x 2.5 horizontal Weight: 2.4 lbs

Hammond 171 Series Line Isolation Plug & Receptacle Transformer 200 VA capacity. Primary 115 VAC, 50/60 Hz. Secondary 115 VAC Provides circuit isolation. Electrostatic shield between primary & secondary Standard 3-wire, grounded plug and receptacle. 5 foot U ground" cord & plug. 3" x 3.88" mounting centers 9.4 lbs

Coil assembly for P-T156. Use your own iron to preserve mechanical fit. Coil window is 1/2 x 1/2".

Specifications Audio Watts: 8 Primary Impendance (Ohms): 2.5k/4K center-tapped Secondary Impendance (Ohms): 6/8 - 3.2/4 Mounting centers: 2-13/16u-bracket Weight: 1.0 lb.

Primary 115 VAC, 60 Hz. Center tapped secondary. Open style, channel bracket, two hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 10 VCT4 A Mounting Centers: 3-1/8"u-bracket Weight:1.5 lbs

Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 25 mH5% tolerance Q (min): 102 Test Frequency (KHz): 79 Self Resonant Min. Frequency (MHz): 0.33 Maximum DC current resistance (Ohms): 127 Maximum DC current (mA): 65 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite

Specifications Rating: 1 Henry, 300 mA Max. VDC: 400 Resistance: 40 ohms Mounting centers: 2.81 u-frame Weight: 1.5 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Primary 115 VAC, 60 Hz. Center tapped secondary. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 10 VCT10 A Mounting Centers: 2" x 2.19"vertical Weight:3.4 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 360-0-360 V120 mA Filament winding 1: 5 V3 A Filament winding 2: 6.3 V3.5 A CT Mounting centers: 2.5" x 2.38" vertical mount Weight: 5.4 lbs.

Molded powdered iron core. 1-1/4 long axial leads. High inductance & high current. L measured at 1 Khz. Inductance: 250 µH20% tolerance DC resistance ohms: .17 Self Resonant Frequency (MHz): 1.5 Maximum DC current amps: 2.5 Coil diameter (in): .43 Core Length (in): 1.25

Specifications Rating: 4 Henries, 225 mA Max. VDC: 500 Resistance: 65 ohms Mounting centers: 3.56 u-frame Weight: 2.3 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Primary 115 VAC, 60 Hz. Center tapped secondary. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 6.3 VCT10 A Mounting Centers: 1.69" x 2.00"vertical Weight:2.5 lbs

Primary 115 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 425-0-425 V150 mA Filament winding 1: 5 V3 A Filament winding 2: 6.3 V5 A CT Mounting centers: 2.5" x 2.69" vertical mount Weight: 6 lbs.

455 kHZ

Specifications Rating: 2.5 Henries, 300 mA Max. VDC: 500 Resistance: 43 ohms Mounting centers: 3.56 u-frame Weight: 2.25 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Hammond number: 185F24 VA: 130 Secondary V AC (RMS) Series: 24V C.T. @5.4A Parallel: 12V@10.8A Dimensions: 2.81" W x 3.07" D x 3.37" H Weight: 4lbs Hole to Hole : 2.25" W x 2.5" H

Specifications Rating: 2 Henries, 100 mA Max. VDC: 300 Resistance: 175 ohms Mounting centers: 1.75 u-frame Weight: 0.3 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Primary 115 VAC, 60 Hz. Center tapped secondary. Open style, channel bracket, two hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 6.3 VCT10 A Mounting Centers: 3.56"u-bracket Weight:2.2 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. 2" X 2" vertical mounting centers. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). 3.2lbs Secondary: 250-0-250 V100 mA Filament winding 1: 5 V2 A Filament winding 2: 6.3 V3 A

Transformer - Hammond, Output, Replacement for Fender Primary 5,482 ohms Secondary 8 ohms Single Ended 10 Watts

Hammond 169 Series Line Isolation Transformer 175 VA capacity, 1300 secondary current ma. Primary 115 VAC, 60 Hz. Secondary 115 VAC Electrostatic shield between primary & secondary Connection by flexible leads, 8" minimum length 2.5 x 2.69"vertical mounting centers Perfect for circuit isolation or "Classic" bias power supply CSA certified (# LR3902) 6.0 lbs

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Weight 2.6 lbs Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Windings are concentric wound for low stray field and low noise Secondary: 190-0-190 V, 65 mA Filament winding: 6.3 VCT, 2.5 A Mounting centers: 2 x 1.69" vertical mount

Developed in response to requests from the Collins Collectors Association"this is a matching audio transformer for older equipment with 600 ohm audio outputdriving modern speakers. Or for "classic" high impedance speakers used with newer equipmentsimply swap primary for secondary (ie...4 or 8 ohm input and 600 ohms out). Key Features Isolation unit: (i.e. seperate primary and secondary) Primary: 600 Ohm (with 6" wire leads) Secondary: 8 Ohm with 4 Ohm center tap (with solder lugs) Power: Rated at 12 watts Frequency Response: 30 Hz - 20 kHz Weight: 1.3 lbs.

New and improved version, higher power handling smoother frequency response, easy to use secondary tap. Over designed for single ended tube output circuits (triode, tetrode or pentode tubes). Enclosed (shielded), 4 slot, above chassis Type X" mounting. Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref. 1 Khz.) Insulated flexible leads 8" min. Includes a 40% screen tap for Ultra-Linear operation (if desired). High quality laminations(M6) grain oriented silicon steel

Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 5 mH5% tolerance Q (min): 91 Test Frequency (KHz): 250 Self Resonant Min. Frequency (MHz): 1 Maximum DC current resistance (Ohms): 14 Maximum DC current (mA): 160 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite

Specifications Rating: 15 Henries, 30 mA Max. VDC: 400 Resistance: 1,026 ohms Mounting centers: 2 u-frame Weight: 0.3 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.