Replacement for Fender Twin, Super, and Dual Showman. Equivalent to #125C1A & #022699. Specifications Rating: 90 mA Open Circuit Impedance (Ohms): 1,500 (min. at 10 V, 60 Hz) Mounting centers: 2.819"

Replacement for Fender Deluxe and Vibrolux. Equivalent to #125C3A & #022707. Specifications Rating: 50 mA Open Circuit Impedance (Ohms): 1,500 (min. at 10 V, 60 Hz) Mounting centers:2"

Replacement for Fender Deluxe, Deluxe Reverb. Equivalent to #125P23D & # 041316. Note: Does not fit Reissue '65 Reverb. Specifications Primary 117 V, 60 Hz Secondary 330-0-330 VAC @ 120 mA, 340 VDC @ 120 mA, with 50 V bias tap Filament Winding 6.3 V, 3 A Rectifier Filament 5 V, 3 A Mounting Centers 2.25" x 2.875" Weight 5.4 lbs

Replacement for Fender Super Reverb, Pro Reverb, Bandmaster, and Tweed Bassman. Includes rectifier tap. Equivalent to #125P5D & #022798. Specifications Primary 117 V, 60 Hz Secondary 325-0-325 V, 370 VDC @ 200 mA(DC) with 50 V bias tap Filament Winding 6.3 V, 4 A Rectifier Filament 5 V, 3 A Mounting Centers 2.75" x 3.5" Weight 7.5 lbs

Replacement for Deluxe and Deluxe Reverb, 8 ohms. Equivalent to #125A1A & #041318. Specifications Audio 25 W (RMS) Primary Impedance 6,600 Ω Secondary Impedance 8 Ω Mounting Centers 3.125" Mounting Type Vertical Weight 1.6 lbs

Equivalent to #022921 and #125A20B. Replacement for all Fender amps with reverb.

Built to vintage specs with exact interleave ratios and materials. Great for upgrading later issue Marshall™ amps. Gives great classic sound. Good replacement for JMP and JCM 800s. for EL34! Mounting centers are 2.50" x 2.50"

Equivalent to #022913, #125A10B - 8 ohms. Princeton Reverb, Tweed Deluxe.

Built to vintage specs with exact interleave ratios and materials. Great for upgrading later issue Marshall™ amps. Gives great classic sound. Good replacement for JMP and JCM 800s. for EL34! Mounting centers are 3" x 3"

Specifications Rating: 5 Henries, 50 mA Max. VDC: 400 Resistance: 270 ohms Mounting centers: 2" u-frame Weight: 0.3 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Specifications Rating: 5 Henries, 150 mA Max. VDC: 400 Resistance: 105 ohms Mounting centers: 2.81" u-frame Weight: 1.3 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Equivalent to 125A13A, #022871 - 2,4,8 ohms Fender general replacement.

Replacement for Fender Champ, VibroChamp, and Bronco amps, 4 ohms. Equivalent to #125A35A & #022905. Specifications Audio 8 W (RMS) Primary Impedance 7,000 Ω Secondary Impedance 3.2 Ω Mounting Centers 2 3/8" > Weight 0.6 lbs

Specifications Rating: 10 Henries, 100 mA Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Equivalent to 022756, 125P34A. for Bassman, Dual Showman, 100, Twin Reverb.

Specifications Rating: 5 Henries, 200 mA Max. VDC: 600 Resistance: 65 ohms Mounting centers: 1.6875" x 2" vertical mount Weight: 2.5 lbs. Enclosed, 4-hole mounted chokes. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 8" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering; case matches Hammond power transformers & tube audio output transformers.

For JCM900, 100 watts, horizontal mount.

Equivalent to #041318, #125A1A- 8 Ohms. for Deluxe, Deluxe Reverb.

Specifications Power 8 W Primary Impedance 5,000 Ω single-ended Secondary Impedance 8 Ω Mounting Centers 2.375" Mounting Type U-bracket Weight 0.7 lbs

Hammond, Open Bracket, 1.5 H, 200 mA SKU Inductance Henrys DC Current(mA) Resistance(Ohms) Max. Oper. Volts(D.C.) Weight 156R 1.5 200 56 400 0.50 Key Features: Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering. Dimensions A B C D Mtg. Hole 2.81" 1.50" 1.69" 2.38" 0.187"

For AC30 vintage.

For AC30 reissue.

This audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes. It uses the same high quality M6 laminations as the UBT transfomers. Has two identical windings allowing series and parallel combinations. Connection Inductance DC Current Resistance Impedance parallel 12H 150mA 76 2.3K series 48H 75mA 304 9K

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 190-0-190 V, 65 mA Filament winding: 6.3 V, 2.5 A Mounting centers: 1.75" x 1.56" vertical mount Weight: 1.8 lbs.

Specifications Rating: 10 Henries, 200 mA Max. VDC: 800 Resistance: 82 ohms Mounting centers: 2.4375" x 2.5" vertical mount Weight: 5.5 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 300-0-300 V, 100 mA Filament winding 1: 5 V, 2 A Filament winding 2: 6.3 V, 3 A Mounting centers: 2" x 2.19" vertical mount Weight: 3.5 lbs.

Replacement for Princeton Reverb, Tweed Deluxe, 8 ohms. Equivalent to #125A10B & #022913. Specifications Audio 12 W (RMS) Primary Impedance 8,000 Ω Secondary Impedance 8 Ω Mounting Centers 2.875" Mounting Type Vertical Weight 1.0 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 275-0-275 V, 90 mA Filament winding 1: 5 V, 2 A Filament winding 2: 6.3 V, 3 A Mounting centers: 2" x 1.94" vertical mount Weight: 3.3 lbs.

Specifications Rating: 150 Henries, 8 mA Max. VDC: 400 Resistance: 3,700 ohms Mounting centers: 2.38" u-frame Weight: 0.5 lbs. Economical 'open bracket' - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

For Vox AC30 reissue.

Fender Original Blues Junior Power Transformer. 15 watts. Equivalent to #049967. Specifications Audio 15 W (RMS) Primary 117 V, 60 Hz Secondary 330 VDC, 68 mA after rectification Filament Winding 6.6 VAC, 2.6 A Mounting Centers 2" x 2.5" Mounting Type Horizontal Weight 2.6 lbs

Equivalent to 125P7D and 022814 for Bassman, Concert, Pro (no filament CT).

Original Fender® reverb driver for Pro Reverb.

Fender Original Hot Rod Deluxe Power Transformer. Equivalent to #036958. Primary supply 120 VAC @ 60 Hz (Black - White) Secondary #1 (Red - Red) 495 VDC unloaded 440 VDC @ 65.7 mA DC 388 VDC @ 200 mA DC #2 (Brown - Brown) -53.6 VDC @ 1.58 mA DC #3 (Green - Green) 6.6 VAC @ 3.75 mA AC

Fender® Original Tone Master output transformer. 100 Watts. Equivalent to #026478. Specifications Audio 100 W (RMS) Secondary Impedance 4/8/16 Ω Mounting Centers 3.5" x 2.5" Mounting Type Vertical Weight 6.25 lbs

240 volts, equivalent to 022756, 125P34A. for Bassman, Dual Showman, 100, Twin Reverb.

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 20 W Primary Impedance 6,600 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 158 mA Mounting Centers 2" x 2.44" Mount Type

Dual primary 115 VAC, 125 VAC, 60 Hz. Designed for small power or bias supplies, test equipment, preamps etc. Economical , 2 hole channel bracket, chassis mount. Minimum 5" long leads. Secondary: 250 VCT, 130 mA Filament winding: 6.3 V, 2 A Mounting centers: 3.56" u-bracket Weight: 2 lbs.

Equivalent to 022723, 125P26A, for Vibrolux, Vibrolux Reverb, Tremolux

Specifications Rating: 20 Henries, 100 mA Max. VDC: 600 Resistance: 181 ohms Mounting centers: 2" x 2.1875" vertical mount Weight: 3.3 lbs. Enclosed, 4-hole mounted chokes. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 8" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering; case matches Hammond power transformers & tube audio output transformers.

Equivalent to #022905, #125A35A. for Bronco, Champ and Vibrochamp.

For JMP/JCM800, 100 watts.

Dual primary 115 VAC, 125 VAC, 60 Hz. Designed for small power or bias supplies, test equipment, preamps etc. Economical, 2 hole channel bracket, chassis mount. Minimum 5" long leads. Secondary: 120 V, 140 mA Filament winding: 6.3 V, 1.5 A Mounting centers: 3.13" u-bracket Weight: 1.7 lbs.

For Marshall JTM45, 50 watts, 4,8, 16 ohms.

Dual primary 115 VAC, 125 VAC, 60 Hz. Designed for small power or bias supplies, test equipment, preamps etc. Economical, 2 hole channel bracket, chassis mount. Minimum 5" long leads. Secondary: 120 V, 87 mA Filament winding: 6.3 V, 1.2 A Mounting centers: 2.81" u-bracket Weight: 1.3 lbs.

For JTM45, horizontal mount.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 400-0-400 V, 465 mA Filament winding: 6.3 V, 6 A CT Mounting centers: 3" x 3.81" vertical mount Weight: 12.5 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 275-0-275 V, 150 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 5 A Mounting centers: 2.5" x 2.19" vertical mount Weight: 4.75 lbs.

For Vox AC15, 15 watts, 8 ohm.

Genuine Marshall™ 30 watt power transfomer. for JTM30. The distance between mounting centers is 2 13/16" x 2 ¼".

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 400-0-400 V, 200 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 6 A Mounting centers: 2.5" x 2.69" vertical mount Weight: 7 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 300-0-300 V, 200 mA Filament winding 1: 5 V, 3 A CT Filament winding 2: 6.3 V, 6 A CT

Wattage: 50W Max Primary Impedance: 3800 ohms CT S Secondary Impedance: 4-8-16 ohms

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 10 W Primary Impedance 8,000 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 100 mA Mounting Centers 1.69" x 2" Mount Type

Fender® Original '59 Bassman Reissue Power Transformer. Equivalent to #036483. Specifications Primary 120 V, 60 Hz Mounting Centers 2.78" x 3.43" Mounting Type Horizontal Weight 8.5 lbs

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Rating: 350-0-350 V, 175 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 8 A Mounting centers: 2.81" x 3.0" vertical mount Weight: 6.1 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 260-0-260 V, 90 mA Filament winding: 6.3 V, 3.5 A Mounting centers: 2" x 2.19" vertical mount Weight: 3.7 lbs.

Genuine Marshall™ 100 watt output transformer. for Marshall JCM900 and JCM2000.

Fender® Original Tone Master Power Transformer. Equivalent to #026477. Specifications Primary 120 V, 60 Hz Mounting Centers 3.0" x 4.1" Mounting Type Vertical Weight 14.8 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 375-0-375 V, 175 mA Filament winding 1: 5 V, 3 A CT Filament winding 2: 6.3 V, 6 A CT Mounting centers: 2.5" x 2.69" vertical mount Weight: 6.1 lbs.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Secondary: 400-0-400 V, 200 mA Filament winding 1: 5 VCT, 3 A Filament winding : 6.3 VCT, 6 A Mounting centers: 3" x 3.06" vertical mount Weight: 8.9 lbs.

For JMP/JCM800, 50 watts.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 350-0-350 V, 90 mA Filament winding 1: 5 V, 2 A Filament winding 2: 6.3 V, 3 A CT Mounting centers: 2.25" x 2.44" vertical mount Weight: 4.1 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 500-0-500 V, 200 mA Filament winding 1: 5 V, 3 A CT Filament winding 2: 6.3 V, 6 A CT Mounting centers: 3" x 3.31" vertical mount Weight: 9.6 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 325-0-325 V, 150 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 5 A CT Mounting centers: 2.5" x 2.38" horizontal mount Weight: 5.8 lbs.

Genuine Marshall™ 50 watt power transformer. for JCM900.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 300-0-300 V, 125 mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 4 A Mounting centers: 2" x 2.69" vertical mount

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 250-0-250 V, 70 mA Filament winding 1: 5 V, 2 A Filament winding 2: 6.3 V, 2.5 A Mounting centers: 2" x 2.06" vertical mount Weight: 3.3 lbs.

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers. Class A insulation (105 degrees C). Hi-Pot tested to 2,500 VAC. Windings are concentric wound for low stray field and low noise. Secondary: 275-0-275 V, 200 mA Filament winding 1 : 5 VCT, 3 A Filament winding 2 : 6.3 VCT, 6 A Mounting centers: 2.5" x 2.94" vertical mount

For JMP/JCM800, 100 watts.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 275-0-275 V, 65 mA Filament winding 1: 6.3 V, 0.6 A Filament winding 2: 6.3 V, 2.5 A Mounting centers: 2" x 1.69" vertical mount Weight: 2.4 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6" long leads. Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 240-0-240, 50mA Filament winding 1: 5 V, 3 A Filament winding 2: 6.3 V, 4 A Mounting centers: 2" x 2.69" vertical mount

Genuine Marshall™ 30 watt output transfomer. for JTM30 and JTM60.

Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits. Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE). For push-pull output use, see P-T125A - optimized for push-pull tube output circuits. Open style with minimum 12" long primary & secondary leads leads. All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation.

Fender Original Hot Rod DeVille Power Transformer. Equivalent to #041752. Specifications Primary: 117 volt, 60 Hz Secondary: 450VDC, 270 mA after rectification Filament winding 1: 6.3 VAC, 3.75 A Mounting Centers: 2" x 2.5" horizontal Weight: 7.4 lbs

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Windings are concentric wound for low stray field and low noise. Secondary: 180-0-180 V, 465 mA Filament winding : 5 VCT, 3 A Mounting centers: 2.5" X 2.44" vertical mount Weight: 5.6 lbs.

For JCM900, JCM 2000, 50 watts.

Specifications Primary Voltage 120 V Secondary 1 140 V @ 100 mA Secondary 2 28 V @ 20 mA Secondary 3 10.5 V @ 2 A

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 30 W Primary Impedance 5,500 CT Ω Secondary Impedance 4/8/16 Ω - 70V Maximum DC per side 128 mA Mounting Centers 2" x 2.69"

For JCM900, 50 watts, horizontal mount.

The UBT-3 from One Electron is the same size and power (15 watts) as the UBT-1, but has a primary impedance suitable for single or paralleled tubes running at B+ voltages of 300 to 400 volts, such as: 2A3, WE 300B, 50, etc. The frequency response is from 10 Hz to over 60KHz(at 1 watt). The 3K primary impedance offers lower distortion at only slightly less power in designs using the commonly- specified 2.5K transformers. Quantity discounts available. 6.1 lbs.

Equivalent to #049969. for Blues Junior.

Over designed for single ended tube output circuits (triode, tetrode or pentode tubes). Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response at least 20 Hz. to 20 Khz. at full rated power (± 1 db max. ref. 1 Khz). Insulated flexible leads 8" min. Includes a 40% screen tap for Ultra-Linear operation (if desired). High quality laminations, (M6) grain oriented silicon steel. Core is gapped to reduce core saturation in Class-A circuits. For general purpose or replacement use in single ended tube output circuits see our P-T125SE series. Specifications

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 5 VCT, 3 A Mounting Centers: 2.81", u-bracket

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 6.3 VCT, 6 A Mounting Centers: 3-1/8", u-bracket

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 60 W Primary Impedance 4,300 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 318 mA Mounting Centers 2.5" x 2.94"

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 12.6 VCT, 4 A Mounting Centers: 3-1/8", u-bracket

The UBT-1 from One Electron is a low- impedance single-ended output transformer intended for parallel combinations of tubes running a B+ voltages of 250 to 325 volts, such as: two or three EL34s(triode connected), three 2A3s, two 300Bs, two 6AS7s, etc., as well as single sweep tubes run in 'enhanced-triode' mode, resulting in 10 to 15 watts of output power. The UBT-1s low impedance gives an exceptionally broad frequency range of 10Hz to over 75 KHz (at 1 watt). This transformer has been the basis for excellent-sounding single-ended amps, and is notable for its clean, detailed sound.

Primary 115 VAC, 60 Hz Center tapped secondary Enclosed, 4 hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 120 VCT, 0.5 A Mounting Centers: 2" x 1.69", vertical

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 2.5 VCT, 3 A Mounting Centers: 2-3/8", u-bracket

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 60 W Primary Impedance 6,600 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 200 mA Mounting Centers 2.5" x 2.94"

Primary 115 VAC, 60 Hz Center tapped secondary Open style, channel bracket, two hole chassis mount Minimum 6" long leads Dual bobbin design - no electrostatic shield required Class B insulation (130 degrees, C) Hi-Pot test of 2,000 V RMS UL listed (# E50394) & CSA certified (# LR3902) Specifications Rating: 5 VCT, 2 A Mounting Centers: 2-1/8", u-bracket

Genuine Marshall™ output transformer. for JTM45.

Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits. Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE). For push-pull output use, see P-T125A - optimized for push-pull tube output circuits. Open style with minimum 12" long primary & secondary leads leads. All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation.

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 40 W Primary Impedance 6,600 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 200 mA Mounting Centers 2.5" x 2.69" Mount Type Vertical Weight 6.5 lbs Suggested tube types: 6L6GC, 807, 5881, EL34 Cat. No. Dimensions (Inches) A B C D E ± 1/16" G Slot P-T1608 2.50 2.75 3.06 2.00 1.69 .203 x.38 P-T1608A 2.50 2.75 3.06 2.00 1.69 .203 x.38 P-T1609 2.50 2.75 3.06 2.00 1.69 .203 x.38 More...

The UBT-2 from One Electron is the same size and power(15 watts) as the UBT-1, but has a higher primary impedance suitable for single tubes running at B+ voltages of 400 to 500 volts, such as: 50, WE 300B,etc. The trade-off of a higher impedance transformer is worse bandwith, but additional interleaving was added in the UBT-2 to extend the frequency range from 10Hz to over 55 KHz (at 1 watt). The UBT-2 has also been successfully used as a choke load for shunt-feed output stages. Plate supply voltages over 600 volts are not recommended. Quantity discounts available. 6.0lbs.

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 15 W Primary Impedance 8,000 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 100 mA Mounting Centers 2" x 2.5" Mount Type

Genuine Vox output transformer for vintage AC30.

Designed for push-pull tube output circuits. Enclosed (shielded), 4 slot, above chassis Type 'X' mounting. Frequency response 30 Hz. to 30 Khz. at full rated power (± 1 db max. - ref. 1 Khz) minimum. Insulated flexible leads 8" min. Includes 40% screen taps for Ultra-Linear operation (if desired). Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. Specifications Audio Watts (RMS) 15 W Primary Impedance 5,000 CT Ω Secondary Impedance 4/8/16 Ω Maximum DC per side 100 mA Mounting Centers 1.69" x 2" Mount Type

Designed for general purpose or replacement use (not Hi-Fi), in single ended, tube output circuits. Frequency response: 100 Hz. - 15 Khz (± 1db max. - ref. 1 Khz). (For full frequency response (20 Hz. to 20 Khz.) - see P-T1627SE). For push-pull output use, see P-T125A - optimized for push-pull tube output circuits. Open style with minimum 12" long primary & secondary leads leads. All sizes use butt stacked cores (using 29M6 steel) with an air gap, to reduce D.C. core saturation.

Designed for general purpose or replacement use in single ended or phase inverter tube driver circuits. Open style with minimum 5" long primary leads. Minimum frequency response 150 Hz. - 15 Khz (± 1db max. ref. 1 Khz.) at full rated power. Specifications Audio Watts: 5 Primary Impedance (Ohms): 10K Secondary Impedance (Ohms): 90K Secondary Winding: C.T. Laminations: 49% Nickel Weight: 0.4lbs Mounting Centers: 2" u-bracket

Includes: 3 pole, 4 position rotary switch, ¼" output jack and black chicken head knob. Hammond 1600 series transformers all provide secondary impedances of 4, 8, or 16 ohms but due to the unique wiring of the secondary, the impedance cannot be changed without rewiring... Until now. We now offer a selector switch, pre-wired and complete with ¼" output jack. Follow simple instructions provided to wire transformer secondary to switch, mount switch and ¼" jack in separate 3/8" diameter holes in chassis and you'll easily be able to select output impedance as necessary.

Upgrade transformer equivalent to Fender 041318, 125A1A, 022640 for Deluxe, Deluxe Reverb. Primary 6,600 CT, Secondary 4,8,16 ohms. For Push-Pull amp types. 20W Allows for more versatility by added secondary connections that did not exist on the original unit. RoHS Compliant

Specifications Rating: 1 Henry, 300 mA Max. VDC: 400 Resistance: 40 ohms Mounting centers: 2.81 u-frame Weight: 1.5 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Specifications Rating: 15 Henries, 30 mA Max. VDC: 400 Resistance: 1,026 ohms Mounting centers: 2 u-frame Weight: 0.3 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Specifications Rating: 60 Henries, 8 mA Max. VDC: 400 Resistance: 2,750 ohms Mounting centers: 2 u-frame Weight: 0.4 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Specifications Rating: 2.5 Henries, 300 mA Max. VDC: 500 Resistance: 43 ohms Mounting centers: 3.56 u-frame Weight: 2.25 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering.

Primary 115 VAC, 60 Hz. Center tapped secondary. Open style, channel bracket, two hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 10 VCT4 A Mounting Centers: 3-1/8"u-bracket Weight:1.5 lbs

Specifications Rating: 60 mH, 2 A Max. VDC: 500 Resistance: 0.7 ohms Mounting centers: 3.56 u-frame Weight: 3.56 lbs. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads. Units will exhibit less inductance at slightly higher currents or more at lower currents. Perfect for high voltage power supply filtering. Economical "open bracket" - channel mount. Tolerance of 15% on both inductance & resistance. Inductances measured at rated D.C. current. Minimum 5" long leads.

Specifications Audio Watts: 8 watts Primary Impendance (Ohms): 10K center-tapped Secondary Impendance (Ohms): 2/4/8 Mounting centers: 2-3/8u-bracket Weight: 1.0 lbs. Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125H 2.81 1.4 1.7 2.36 0.187

Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 5 mH5% tolerance Q (min): 91 Test Frequency (KHz): 250 Self Resonant Min. Frequency (MHz): 1 Maximum DC current resistance (Ohms): 14 Maximum DC current (mA): 160 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite

Transformer - Hammond, Output, Replacement for Fender Primary 5,482 ohms Secondary 8 ohms Single Ended 10 Watts

Impregnated with a moisture and fungus resistant varnish. 1-1/2 long axial leads. Wound for low distributed capacity by using 3-Pi windings. Inductance: 25 mH5% tolerance Q (min): 102 Test Frequency (KHz): 79 Self Resonant Min. Frequency (MHz): 0.33 Maximum DC current resistance (Ohms): 127 Maximum DC current (mA): 65 Coil diameter (in): .531 Core Length (in): .875 Core Material: Ferrite

Specifications Audio Watts: 8 Primary Impendance (Ohms): 2.5k/4K center-tapped Secondary Impendance (Ohms): 6/8 - 3.2/4 Mounting centers: 2-13/16u-bracket Weight: 1.0 lb.

Developed in response to requests from RCA Radiola III-A collectors. The original transformers are usually found with open" windings due to the fine wire and high turns usedcoupled with age. This is a universal replacement type - it will replace any of the three audio transformers used (1st audio driver2nd audio-phase splitter stage or output transformer)by correctly connectiong the 5 lugs. A pin out and connection diagram is included. The cases from the old transformer will fit this new unit. The terminal board is a duplicate of the original. Key Features

455 kHZ

Primary 115 VAC, 60 Hz. Center tapped secondary. Open style, channel bracket, two hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 6.3 VCT10 A Mounting Centers: 3.56"u-bracket Weight:2.2 lbs

Universal Primary - 100, 110, 120, 200, 220, 240 VAC 50/60 Hz. High voltage secondary designed for full wave center tapped use. 50 VAC bias tap from high voltage secondary C.T. Weight 2.6 lbs Black epoxy painted to match our P-T1650 series of output transformers . Class A insulation (105 degrees C). Hi-Pot test of 2,000 V RMS. Windings are concentric wound for low stray field and low noise Secondary: 190-0-190 V, 65 mA Filament winding: 6.3 VCT, 2.5 A Mounting centers: 2 x 1.69" vertical mount

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 360-0-360 V120 mA Filament winding 1: 5 V3 A Filament winding 2: 6.3 V3.5 A CT Mounting centers: 2.5" x 2.38" vertical mount Weight: 5.4 lbs.

Coil assembly for P-T156. Use your own iron to preserve mechanical fit. Coil window is 1/2 x 1/2".

Primary: 1500 ohms center tapped. Secondary: 600 ohms center tapped.

Use as a standoff or coil/choke form.

Primary: 115 volt, 60 Hz Secondary: 115 volt, must be hardwired VA Rating:35 Mounting centers: 3.125U-bracket Weight: 1.8 lbs.

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). Secondary: 325-0-325 V40 mA Filament winding 1: 5 V2 A Filament winding 2: 6.3 V2 A Mounting centers:2" x 2.5 horizontal Weight: 2.4 lbs

Primary 115 VAC, 60 Hz. Center tapped secondary. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 6.3 VCT10 A Mounting Centers: 1.69" x 2.00"vertical Weight:2.5 lbs

Primary 115 VAC, 60 Hz. Center tapped secondary. Enclosed, 4 hole chassis mount. Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) Hi-Pot test of 2000 V RMS. UL listed (# E50394) & CSA certified (# LR3902). Specifications Rating: 12.6 VCT2.5 A Mounting Centers: 1.5" x 1.56"vertical Mounting Centers: 1.4 lbs

Hammond 169 Series Line Isolation Transformer 175 VA capacity, 1300 secondary current ma. Primary 115 VAC, 60 Hz. Secondary 115 VAC Electrostatic shield between primary & secondary Connection by flexible leads, 8" minimum length 2.5 x 2.69"vertical mounting centers Perfect for circuit isolation or "Classic" bias power supply CSA certified (# LR3902) 6.0 lbs

Dual primary 115 VAC, 125 VAC, 60 Hz. Secondary DC current measured with cap. input filter, full wave (two diode) C.T., rectifier circuit. Enclosed, 4 hole chassis mount. Minimum 6 long leads. 2" X 2" vertical mounting centers. Class A insulation (105 degrees C). Hi-Pot test of 2000 V RMS. Conservative designs - CSA certified (# LR3902). 3.2lbs Secondary: 250-0-250 V100 mA Filament winding 1: 5 V2 A Filament winding 2: 6.3 V3 A

Primary 117/234 VAC, 50/60 Hz. Secondary can be used as; a center tapped secondary, parallel connected or used individually. Open style Minimum 6 long leads. Dual bobbin design - no electrostatic shield required. Class B insulation (130 degreesC) for extra protection - UL listed as a Class A (105 degreeC) design Hi-Pot test of 2000V RMS UL listed (# E50394) Type 3AH CSA certified (# LR3902) Secondary VAC(RMS) :5V @ 3A(Series C.T.)2.5V @ 6A(Parallel) Mounting centers: 2.81" Weight: 1.06 lbs.

Hammond 171 Series Line Isolation Plug & Receptacle Transformer 200 VA capacity. Primary 115 VAC, 50/60 Hz. Secondary 115 VAC Provides circuit isolation. Electrostatic shield between primary & secondary Standard 3-wire, grounded plug and receptacle. 5 foot U ground" cord & plug. 3" x 3.88" mounting centers 9.4 lbs