Vacuum Tubes

The 12AT7 is a miniature, high-mu, twin triode designed for use as a grounded-grid radio-frequency amplifier or as a combined oscillator and mixer at frequencies below approximately 300 megacycles.

Full-wave rectifier of the heater-cathode type intended for use in AC operated and automobile receivers. Because of its heater-cathode construction it has the same heating time as that of other heater-cathode types in the receiver.

Frame grid double triode of miniature construction with high transconductance and low noise, designed for service in television receiver VHF cascode RF amplifiers, IF amplifiers, and phase inverter stages.

General purpose high-mu triode. It is designed for service as a high gain resistance coupled amplifier in AC and AC - DC operated receivers.

Beam pentode featuring Novar construction with a special plate fin. The fin provides improved heat distribution and a greater plate dissipation capability. This in turn increases reliability under rated conditions.

Heater-cathode type pentode amplifier tube with remote cut-off characteristics and is designed for use as a radio frequency or intermediate frequency amplifier in a-c or battery operated equipment

Beam pentode for power amplifier, oscillator, and modulator applications.

Tung Sol EF806 SG pentode preamp tube with gold pins. Made in Russia. Super premium EF86/6267 replacement based on the Telefunken EF806S. Super low noise and microphonics. Gold pins.

Power amplifier pentode designed for use in the audio-frequency power output stage of television and radio receivers and in high fidelity amplifiers.

Transmitting triode for oscillator applications requiring unusually stable characteristics.

Beam Power Amplifier

Half-wave high-vacuum rectifier designed for use in a-c/d-c receivers. The heater is tapped to permit operation of a panel lamp.

Sharp cut-off amplifier pentode designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. The 6SH7 is not recommended for use as a high-gain audio amplifier because undesirable hum may be encountered.

Super-premium Octal Beam Tetrode, impervious to overload when used at parameters found in existing 6550/KT88/KT90 circuits. Plate dissipation of 60 watts and higher current handling capacity has allowed the design of new amplifiers which are unique, extremely powerful and stable.

Sovtek 12AX7WC dual triode preamp tube. Made in Russia.

Medium-mu twin triode designed for use as a voltage amplifier or oscillator.

This triode has a full 40 Watts of power. The robust build of the JJ 300B offers high reliability in a classy package. Each tube comes with a factory certification with sets dual matched for anode current and gain. The JJ 300B has a balanced and detailed sound with a wide frequency response.

Voltage-reference tube, 7-pin miniature, glow-discharge type. Especially useful as a voltage reference tube in DC power supplies.

Subminiature medium-mu twin triode for use in general purpose amplifier applications. Each section has an individual cathode and is electrically independent.

The 6100 / 6C4WA is a heater-cathode type medium-mu triode of miniature construction, suitable for use as a class C amplifier and oscillator. This type is characterized by long life and stable performance.

Semi-remote cutoff pentode. It is designed for service in the IF stages of color and monochrome television receivers and may be used in the tuners of such sets as an AF amplifier.

Diode and a remote cutoff pentode with a common cathode of the 9 pin miniature type especially designed for use as combined IF amplifier and AM detector tubes in AM and AM/FM broadcast receivers.

Twin-diode with individual cathodes brought out to separate base pins. The 6H6 is designed for service as a diode detector, automatic volume control rectifier, or as a low current power rectifier

General-purpose triode designed for use as a detector, amplifier, or oscillator. Features include a relatively high transconductance and a medium amplification factor.