1. Home
  2. Products
  3. Capacitors

Capacitor - Solen, 250V, "Fast", Metalized Polypropylene

Capacitor - Solen, 250V, "Fast", Metalized Polypropylene

Solen
Capacitor - Solen, 250V, "Fast", Metalized Polypropylene image 1
Capacitor - Solen, 250V, "Fast", Metalized Polypropylene image 2
Customer image:<br/>"I installed a couple Solens Fast Cap films in this Kenwood 700c preamp. They are much better than the original electrolytics"
Click to zoom in
Capacitor - Solen, 250V, "Fast", Metalized Polypropylene image 1Capacitor - Solen, 250V, "Fast", Metalized Polypropylene image 2
Customer Images:
Customer image: "I installed a couple Solens Fast Cap films in this Kenwood 700c preamp. They are much better than the original electrolytics"
Starting at: $4.75
In Stock

Made of the highest quality aluminum metalized polypropylene film available. Made in France.

Solen "Fast" metallized film capacitors use the maximum lowest possible resistivity metallized layer for a given film thickness which is vacuum deposited on a biaxially oriented polypropylene film. The FAST CAPACITOR ™ concept is mainly obtained by decreasing the film width from the standard round tubular winding type configuration to a shorter FAST tubular “square aspect ratio” round winding type which decrease the winding resistivity and also increase the contact area.

This superior concept significantly improved the electrical and mechanical characteristics of the film capacitor. They deliver a high level of performance that has never before been achieved, which will directly enhance the efficiency of any electronic or electrical equipment. SOLEN polypropylene metallized FAST CAPACITOR™ outperform any other similar capacitors: multi sections, segmented, oval, stacked, ordinary or otherwise, due to unique short length, large diameter, FAST design.

They have lower dielectric absorption factor, lower equivalent series resistance, lower inductance, higher resonant frequency, more linear impedance, lower dissipation factor, higher current capacity, faster rise time, unrivalled handling of fast high current pulse, high temperature stability, excellent long term electrical and mechanical reliability and a better damped mechanical self resonance under dynamic signal conditions.

SKU:
C-FT-250
Item ID:
001596
Brand:
Solen
Capacitance:
1 µF, 10 µF, 15 µF, 22 µF, 2.2 µF, 3.3 µF, 47 µF, 4.7 µF, 5.1 µF, 6.8 µF
Termination Style:
Axial Leads
Type:
FilmPolypropylene
Voltage Rating:
250 V
RoHS Compliant
Part Numbers
Capacitance - µFOur Part NumberUPC/EANSolen Part Number
1 µFC-FT1-250609722132480 PA100
2.2 µFC-FT2D2-250609722132497 PA220
3.3 µFC-FT3D3-250609722132503 PA330
4.7 µFC-FT4D7-250609722132510 PA470
5.1 µFC-FT5D1-250609722132527 PA510
6.8 µFC-FT6D8-250609722132534 PA680
10 µFC-FT10-250609722132541 PA1000
15 µFC-FT15-250609722132558 PA1500
22 µFC-FT22-250609722132565 PA2200
47 µFC-FT47-250609722132572 PA4700
Diameter1 µF versionC-FT1-2500.4 in.
2.2 µF versionC-FT2D2-2500.49 in.
3.3 µF versionC-FT3D3-2500.58 in.
4.7 µF versionC-FT4D7-2500.64 in.
5.1 µF versionC-FT5D1-2500.64 in.
6.8 µF versionC-FT6D8-2500.72 in.
10 µF versionC-FT10-2500.83 in.
15 µF versionC-FT15-2500.98 in.
22 µF versionC-FT22-2501.09 in.
47 µF versionC-FT47-2501.37 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1 µF versionC-FT1-2500.87 in.
2.2 µF versionC-FT2D2-2501.06 in.
3.3 µF versionC-FT3D3-2501.12 in.
4.7 µF versionC-FT4D7-2501.1 in.
5.1 µF versionC-FT5D1-2501.25 in.
6.8 µF versionC-FT6D8-2501.29 in.
10 µF versionC-FT10-2501.34 in.
15 µF versionC-FT15-2501.49 in.
22 µF versionC-FT22-2501.74 in.
47 µF versionC-FT47-2502.15 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
Packaging Information
Packaging Dimensions1 µF versionC-FT1-2503.3 in. × 0.4 in. × 0.4 in.
2.2 µF versionC-FT2D2-2503.5 in. × 0.5 in. × 0.5 in.
3.3 µF versionC-FT3D3-2503.5 in. × 0.6 in. × 0.6 in.
4.7 µF versionC-FT4D7-2504 in. × 0.7 in. × 0.7 in.
5.1 µF versionC-FT5D1-2503.8 in. × 0.7 in. × 0.7 in.
6.8 µF versionC-FT6D8-2504.3 in. × 0.8 in. × 0.8 in.
10 µF versionC-FT10-2504.3 in. × 0.9 in. × 0.9 in.
15 µF versionC-FT15-2504.5 in. × 1 in. × 1 in.
22 µF versionC-FT22-2505 in. × 1.1 in. × 1.1 in.
47 µF versionC-FT47-2506 in. × 1.4 in. × 1.4 in.
Weight (Packaging)1 µF versionC-FT1-2500.0088 lbs.
2.2 µF versionC-FT2D2-2500.0088 lbs.
3.3 µF versionC-FT3D3-2500.0132 lbs.
4.7 µF versionC-FT4D7-2500.0154 lbs.
5.1 µF versionC-FT5D1-2500.0198 lbs.
6.8 µF versionC-FT6D8-2500.0243 lbs.
10 µF versionC-FT10-2500.0375 lbs.
15 µF versionC-FT15-2500.0441 lbs.
22 µF versionC-FT22-2500.0639 lbs.
47 µF versionC-FT47-2500.3086 lbs.
C-FT5D1-250 - 5.1 µF versionDiameter0.64 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.25 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT47-250 - 47 µF versionDiameter1.37 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length2.15 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT1-250 - 1 µF versionDiameter0.4 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length0.87 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT2D2-250 - 2.2 µF versionDiameter0.49 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.06 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT3D3-250 - 3.3 µF versionDiameter0.58 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.12 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT4D7-250 - 4.7 µF versionDiameter0.64 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.1 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT10-250 - 10 µF versionDiameter0.83 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.34 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT15-250 - 15 µF versionDiameter0.98 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.49 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT22-250 - 22 µF versionDiameter1.09 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.74 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"
C-FT6D8-250 - 6.8 µF versionDiameter0.72 in.
Dielectricpolypropylene film
Dielectric Absorption Factor≤ .05 % @ 20 °C.
Dielectric Constant (Er)2.1ε
Dielectric Thickness6 µm
Insulation Resistance≥ 100,000 MΩ @ 20°C
Item Length1.29 in.
Lead Typeaxial
Rated Voltage250 VDC / 150 VAC
Self Inductance< 12 nH
Temperature Rating-55°C to 85°C
Tolerance±5%
Winding Typetubular "square aspect ratio"

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet114.75 KB
Questions? Contact us at [email protected], or give us a call at 480-820-5411
Add a review

Product Reviews

5.00 out of 5 based on 3 reviews
John P - December 18th, 2023
5 out of 5

I use the Solens Fast caps in speaker crossover projects, and occasionally in the signal path of a preamp or integrated. I am always happy with the results

William Alexander - August 30th, 2020
5 out of 5

It's a capacitor of close tolerance. Very good choice to use in speaker crossover applications. High quality and should last longer than two lifetimes.

Stephen C Smrdel - February 22nd, 2015
5 out of 5

I replaced a all of the 1 uF non polar aluminum electrolytic capacitors with 1 uF Solen Metalized Polypropylene used in a cross-over network in computer speakers with sub-woofer. The Solen capacitors do not introduce distortion that the non polar electrolytic do. I have used values of Solen capacitors in other audio circuits and in every case distortion is reduced.