Screws - Original Fender, Vintage Speaker Mounting Stud / Nut
Original Fender speaker mounting stud/nut set.
These speaker mounting studs were used on countless amps of the '50s, '60s, '70s, and beyond. The reverse thread section screws into the baffle wood and the machine screw section holds the speaker in place using the included keps nuts.
- Used on early ’50s and ’60s vintage amplifiers
- Fits most vintage and modern amplifiers
- 1” of 8-32 machine head thread
- ¼” of reverse wood thread
- 1-½” overall length
- 8-32 keps nuts included
Machine Head Thread Length | 1 in. | ||
Overall Length | 1.5 in. | ||
Reverse Wood Thread Length | 0.25 in. | ||
U.S. Screw Number | #8 | ||
U.S. Thread Pitch | 32 tpi. |
Packaging Dimensions | 5 in. × 2.75 in. × 0.681 in. | ||
Weight (Packaging) | 0.1521 lbs. |
My Project Lists
Questions? Contact us at [email protected], or give us a call at 480-820-5411
Customers who purchased this item also bought
- Resistors - 0.5 Watt, Carbon Film, 5% tolerance
- Capacitors - Orange Drop, 600V, Polyester
- Capacitor - Sprague Atom, Aluminum Electrolytic
- Capacitor - Mallory, 630V, 150s, Axial Lead
- Resistor - PR02, Vishay BC, 2 Watt, Power Metal Film
- Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
Product Reviews
Worked as planned. Smooth threading of the nut on the machine screw side while the reverse thread wood screw side bit into the baffle nicely and feels solid. Just needed a bit of countersink so that it mounts flush to the baffle, and done.
Purchased these Fender mounting screws for another speaker restoration but the didn’t workout for that job. But I was restoring a pair of 42 year old Wharfdale W35 Speakers. I did not have any screws that worked in the threaded incerts in on the cabinets. Tried out the fender mounting screw from the front and they worked perfectly.
Purchased these Fender mounting screws for another speaker restoration but the didn’t workout for that job. But I was restoring a pair of 42 year old Wharfdale W35 Speakers. I did not have any screws that worked in the threaded incerts in on the cabinets. Tried out the fender mounting screw from the front and they worked perfectly.