Dial Lamp - LED version, #47 or #44, T-3-¼, 6.3V, Bayonet Base
LED version of the general replacement lamps for dials, indicators, etc. Used as the pilot light on the vast majority of Fender amps and many others as well.
This LED version can be used to replace either #44 or #47 bulbs (see P-44 and P-47 for incandescent versions).
The color options for this LED bulb can be combined with colored jewels to create new and interesting color options! The opaque shell on these LED bulbs provides a clean diffused glow.
These bulbs are compatible with our P-L124-P lamp holder.
Color | Our Part Number | UPC/EAN |
---|---|---|
Blue | P-47-LED-BLU | |
Cool White | P-47-LED-CW | |
Green | P-47-LED-GRN | 841358115486 |
Orange | P-47-LED-ORG | 841358115455 |
Red | P-47-LED-RED | 841358115462 |
Warm White | P-47-LED-WW | |
Yellow | P-47-LED-YEL | 841358115479 |
Lamp Number | 44 or 47 | ||
Lamp Type | Bayonet | ||
Size | T-3 1/4 | ||
Voltage | 6.3 V | ||
Watts | 0.1 W |
Packaging Dimensions | 1.157 in. × 0.459 in. × 0.459 in. | ||
Weight (Packaging) | 0.0066 lbs. |
P-47-LED-BLU - Blue version | Lamp Number | 44 or 47 |
Lamp Type | Bayonet | |
Size | T-3 1/4 | |
Voltage | 6.3 V | |
Watts | 0.1 W | |
P-47-LED-CW - Cool White version | Lamp Number | 44 or 47 |
Lamp Type | Bayonet | |
Size | T-3 1/4 | |
Voltage | 6.3 V | |
Watts | 0.1 W | |
P-47-LED-WW - Warm White version | Lamp Number | 44 or 47 |
Lamp Type | Bayonet | |
Size | T-3 1/4 | |
Voltage | 6.3 V | |
Watts | 0.1 W | |
P-47-LED-GRN - Green version | Lamp Number | 44 or 47 |
Lamp Type | Bayonet | |
Size | T-3 1/4 | |
Voltage | 6.3 V | |
Watts | 0.1 W | |
P-47-LED-ORG - Orange version | Lamp Number | 44 or 47 |
Lamp Type | Bayonet | |
Size | T-3 1/4 | |
Voltage | 6.3 V | |
Watts | 0.1 W | |
P-47-LED-RED - Red version | Lamp Number | 44 or 47 |
Lamp Type | Bayonet | |
Size | T-3 1/4 | |
Voltage | 6.3 V | |
Watts | 0.1 W | |
P-47-LED-YEL - Yellow version | Lamp Number | 44 or 47 |
Lamp Type | Bayonet | |
Size | T-3 1/4 | |
Voltage | 6.3 V | |
Watts | 0.1 W |
My Project Lists
Questions? Contact us at [email protected], or give us a call at 480-820-5411
Customers who purchased this item also bought
- Capacitor - Mod® Electronics, Aluminum Electrolytic, 105°C, Axial Lead
- Jewel - Fender Style, for lamps / bulbs
- Dial Lamp - Fender Style, Premium Pilot Assembly
- Wire - Gavitt, Cloth, 22AWG Stranded, Top Coat Pre-Tinned
- Capacitor - Mallory, 630V, 150s, Axial Lead
- Potentiometer - Alpha, Audio, Solid Shaft, 16mm
Product Reviews
These have great light output and look good behind the heels or the fluted domes that fit in the fender style bulb holders.
A gorgeously vivid and bright green bulb.
Great product, excellent customer service very fast shipping.
Thank you
These lamps are awesome! Great brightness and color. The white works well with any color lens, and they fit nicely in your Fender lamp holders. A great replacement for incandescents, when your power supply is a bit strained. I measured the white one at 14ma at 6.3 volts. Will definatly get more!
I first used a similar product from a surplus shop a while back for lighting up Fender type jewel indicator lamps and loved it. The amp was a beast with lots of tubes in it and when removing the tubes the heater voltage rose enough to fry the LED lamp, so keep that in mind. Most people are NOT using 8 KT88s or 10 6550s and a barge full of preamp tubes, so it shouldn't be a problem but it can fry these if your amp uses the heater supply winding and you turn the amp on with no tubes. In future monster builds I put the indicator on the line voltage with a large dropping resistor. DONE! I buy the old #47 type lamps 1000 at a time. Some pinball machines used over 500 #47 lamps! The whole back panel was surrounded with #47s on one model, with a chase lighting circuit. These would sure hold up a lot better than #47s in that application.
I ordered 10 of these in warm white and intended to use them to relamp the dial in a Scott receiver. The color of these LEDs are inconsistent and range from warm white to a light shade of pink. Will not buy again.
Tried a couple of warm whites in a 1951 Zenith console chassis and they worked great! Lit up the dial with a beautiful warm glow, far better than the sharp glare from the original incandescent bulbs.
The green led light in action!
I purchased four different colors from AES, some were used in my amplifier project and some were used in my Swan 240 tri-band transceiver with great results. I purchased red, cool white, warm white, and green.
The LED Lamps don't fit the Dial Lamp - Front Panel Indicator Light. The plastic color indicator band blocks it from from engaging the two pins. I cut off the band on a red one (super glued it back together) and used a red jewel, looked really nice.