XLR Jack - Amphenol, 3-Pole, Male, PC Mount

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

XLR Jack - Switchcraft, premium, rectangular panel-mount
Receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter. Standard latchlock;
Starting at $5.35
XLR Jack - Cliff, 3-Pole, Male, Solder Cup
Colors Available:
Cliff metal chassis mount XLR connectors. 3 pole, male, with machined connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. Mounting hardware not included. Features
  • The housing can be either front or rear mounted using the same panel cutout
  • Machined connectors
  • Solder cup
  • Connectors are fitted with a grounding lug
  • Compatible with all other XLR brands
Starting at $2.79
XLR Jack - Cliff, 3-Pole, Female, Solder Cup
Colors Available:
Cliff metal chassis mount XLR connectors. 3 pole, female, with stamped connectors. The Cliff range of professional, high quality XLR audio connectors can be used in numerous applications including professional and consumer audio, broadcast and industrial uses. These Cliff XLRs feature solder cups for wiring directly to the connector. For greater reliability, the female connectors have contact pins which provide a large surface area and self-clean upon plug insertion. Mounting hardware not included. Features
  • The housing can be either front or rear mounted using the same panel cutout
  • A leading first mate last break socket contact is standard on all female connectors (Pin 1)
  • Solder cup
  • Connectors are fitted with a grounding lug
  • Compatible with all other XLR brands
Starting at $3.25
XLR Jack - Switchcraft, premium, circular panel-mount
C Series Circular Panel Mount 3 Pin XLR Female, mounts with #5 Screws (Not included) - Silver Pins / Nickel Finish.
Starting at $9.95
XLR Jack - Amphenol, 3-Pole, Female, D Flange
Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole female, D Flange, machined, black finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Features
  • The “D” size housing can be either front or rear mounted using the same panel cutout
  • A leading first mate last break socket contact is standard on all female connectors (Pin 1)
  • Solder cup
  • Connectors are fitted with a grounding system for RFI shielding applications
  • Compatible with all other XLR brands

Note: A ground tag is standard on all AC "Z" series connectors.
$3.95
XLR Jack - Amphenol, 3-Pole, Male, D Flange
Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole male, D Flange, Stamped contacts, Nickel finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Note: A ground tag is standard on all AC "Z" series connectors. Although the ground tag is intended for RFI shielding applications, Amphenol cannot guarantee its effectiveness in all cases.
$3.95
¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $2.35
¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Starting at $2.75
¼" Jack - PC Mount, switched, mono
Mono input. PC mount terminals. Metal ferrule. Shorting. Similar to S-H901PC-X.
Starting at $1.45
¼" Plug - Switchcraft, cable-mount
Switchcraft Type 280. ¼” straight plug with solder lugs and cable clamp. Switchcraft Heavy duty machined copper alloy handle, tip and body for unsurpassed ruggedness
Starting at $3.65
¼" Jack - Cliff, Solder Lug, for Marshall, metal nut
Solder terminals, switched. Metal ferrule, vintage style.
Features:
  • Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
  • Tough, molded grade 1 black Nylon body.
  • Made in the U.K.
  • Supplied with a metal hexagonal mounting nut
  • Designed to receive both mono and stereo 1/4" jack plugs

Withstand Voltage: 2000VDC Min. Maximum Current: 5A Temperature Rating: -10°C ~ +70°C Life (Minimum): 10,000+ Operations Nominal Contact Resistance: < 50 mΩ
Starting at $2.95
¼" Jack - Switchcraft, Stereo, double open circuit
Switchcraft Type 12B Littel-Jax stereo phone jack. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Stereo 3-Conductor double open circuit (does not have switched terminal). Includes nut and washer.
$2.95
3.5mm Jack - Qingpu, Eurorack, Mono, Switched Tip, PC Mount
PCB mounted 3.5mm mono jacks commonly found in DIY Eurorack projects. These are the newest version from Qingpu Electronics featuring a square bushing plate for added durability. Hardware sold separately. See accessory items below.
$0.45
Power Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal
Colors Available:
½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.
$0.99
¼" Jack - Lumberg, Low Profile, Mono, Open Circuit
Low profile mono jacks made by Lumberg. These high quality jacks are the perfect size for tightly packed pedal enclosures. The premium look, feel, and construction make Lumberg jacks an excellent choice for any build.
  • M9*0.75 Bushing Thread
  • Mono 2-Conductor
  • Open Circuit (does not have switched terminal).
  • Includes nut and washer.
$1.95
Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-K for the knurled, slotted version of this nut. See W-QP-WASHER for compatible washer
$0.15