Alignment Kit - GC Electronics, for color TVs
Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:
- 8282 Zenith type Hex/Screwdriver
- 8606 5" Hex wrench
- 9091 Hex iron core tool
- 9300 5" Double sided hex tool
- 9304 Hex screwdriver combination
- 8608 Potentiometer Adjustment Tool
SKU:
S-T8454
Item ID:
005774
UPC/EAN:
609722157117
Brand:
GC Electronics
Packaging Dimensions | 9 in. × 4 in. × 0.3 in. | ||
Weight (Packaging) | 0.0507 lbs. |
My Project Lists
Questions? Contact us at [email protected], or give us a call at 480-820-5411
Product Reviews
Perfect and good quality.
I purchased this set to align my Heathkit AR-1500s. One of them perfectly fit!
Is a great product
Very good set also included hard to find tool for Zenith IF coils.
Would recommend.
Anybody that is poking around in ANY amp, radio, TV set, piece of test gear, etc. NEEDS THIS SET as a minimum requirement. Delrin is a fantastically tough and resilient plastic that will NOT get brittle like the old Nylon screwdrivers, and these are BRAND NEW tools. DO NOT GO POKING AROUND IN THAT DUMBLE WITH SCREWDRIVER! Us the nylon screw type pot adjuster. DO NOT TRY TO PEAK THAT TRANSMITTER WITH METAL BLADE SCREWDRIVER! Use the Delrin tools! You are going screw something up, blow something up, get hurt, die or some combination of the aforementioned bad stuff I just mentioned. No, you probably won't use those hex wrenches to turn iron or ferrite cores to tune a tank circuit, but they do have little screwdriver blade for turning trim pots, and $8 is darn good insurance policy!
This looks like a pretty good kit. I needed a new one after moving and loss of my old alignment tools. I also need one to fit the wide slotted 3/4" 455 kHz IF transformers in Hallicrafters receivers. It's risky to use a metal screwdriver on these as the slug could crack easily.
My Alignment Tools arrived as described on your webpage. I'm very satisfied.