Receptacle - IEC C14, for power cord, 3 prong

Receptacle - IEC C14, for power cord, 3 prong

Receptacle - IEC C14, for power cord, 3 prong image 1
Receptacle - IEC C14, for power cord, 3 prong image 2
Click to zoom in
Receptacle - IEC C14, for power cord, 3 prong image 1Receptacle - IEC C14, for power cord, 3 prong image 2
Customer Images:
No Images yet! Submit a product image below!
$2.15
In Stock

Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections can be soldered into place or used with quick disconnects. See Specifications, Files, and Documents for a datasheet with dimensions and panel cut out sizing.

Body Materialthermoplastic
Cut-out Length27.5 mm
Cut-out Width19.5 mm
Dielectric Strength2,000 VAC 1 minute
Insulation Resistance> 100 MΩ at 500 VDC
Item Height20.5 mm
Item Length50 mm
Item Width22.3 mm
Mounting Hole Center to Center40 mm
Mounting Hole Diameter3.3 mm
Plug Hole Depth17 mm
Plug Hole Length24 mm
Plug Hole Width16 mm
Packaging Information
Packaging Dimensions2 in. × 1.1 in. × 0.9 in.
Weight (Packaging)0.0243 lbs.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PNG: Specification Sheet Specification Sheet88.61 KB
Questions? Contact us at [email protected], or give us a call at 480-820-5411

Product Reviews

5.00 out of 5 based on 5 reviews
Andrei - December 6th, 2022
5 out of 5

Good quality. However I ended up not using it due to clearance problems.

Presence Boost - January 27th, 2022
5 out of 5

Looks like an ordinary decent IEC connector. Just what I needed for my project.

noname - November 19th, 2015
5 out of 5

Eleven years ago I built a stereo tube amp from scratch. I replaced the power cords twice due to fraying in the strain relief. I purchased an IEC power receptacle to avoid this happening in the future. Its nice to be able to remove the cord from the rear of the chassis rather than unplug it from a power strip in the back of the cabinet. Computer power cords work just dandy for this application.

Jim Rossi - June 10th, 2015
5 out of 5

Really cleans up the rear of cases.

Ralph Henderson - December 16th, 2014
5 out of 5

Great parts, service and price!!