Item Unavailable
Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?
Capacitor - Mallory, 630V, 150s, Axial Lead
Tubular metalized polyester film construction
Please Note: Color of capacitor may vary from one production run to another.
- ±10% tolerance
- Axial leads
- Non-Inductive, Self Healing
Please Note: Color of capacitor may vary from one production run to another.
Starting at $1.19
Transformer - Hammond, Output, replacement for Orange Rocker 30
Hammond output transformer - replacement for Orange Rocker 30 Specifications: Part No. Pri Ohms Sec Ohms Amplifier Type Watts Bobbin/Paper Winding Equivalent To P-T1750ORF 6,000 C.T. 8, 16 Push-Pull 35 W Bobbin OT199SL
$82.23
Vacuum Tube - 6SK7, Pentode, Remote Cut-Off, RF
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$6.90
Vacuum Tube - 5654 / 6AK5W, Pentode, Sharp Cut-Off, RF
Miniature sharp-cutoff pentode for use as a wide-band, high-frequency amplifier. It is also useful in video and audio amplifiers, oscillators, mixers, frequency multipliers, and cathode followers.
$4.90
Vacuum Tube - 6K7GT, Pentode, Remote Cut-Off, RF
The 6K7GT is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
$5.90
Vacuum Tube - 1N5GT / 1P5GT, Pentode, Sharp Cut-Off, RF
Filamentary type sharp cut-off pentode voltage amplifier. It is designed for service in low-drain battery-operated receivers as an RF, IF, or AF amplifier.
$5.90
Vacuum Tube - 6SK7GT, Pentode, Remote Cut-Off, RF
Remote-cutoff pentode. It is designed for use as a high-gain radio-frequency or intermediate-frequency amplifier in a radio receiver.
$5.90
Vacuum Tube - 6SH7, Pentode, Sharp Cut-Off, RF
Sharp cut-off amplifier pentode designed for use as a high-gain radio-frequency or intermediate-frequency amplifier. The 6SH7 is not recommended for use as a high-gain audio amplifier because undesirable hum may be encountered.
$4.90
Vacuum Tube - 12SK7GT, Pentode, Remote Cut-Off, RF
Single ended cathode type super control pentode primarily designed for amplifier service in radio or intermediate frequency circuits. In properly designed superheterodyne circuits it may also be used as a mixer tube.
$6.90
Vacuum Tube - 6SH7GT, Pentode, Sharp Cut-Off, RF
Triple grid sharp cut-off amplifier. It is designed for service in high gain RF and IF amplifier applications and for limited service in FM receivers. The double cathode connection is useful in reducing cathode circuit coupling.
Starting at $4.50
Vacuum Tube - 6EW6, Pentode, Sharp Cut-Off, RF
Miniature, sharp-cutoff pentode designed for intermediate frequency amplifier service in television receivers. Features of the tube include high transconductance and separate base-pin terminals for the cathode and suppressor.
$6.90
Vacuum Tube - 12BZ6, Pentode, Semi Remote, RF
High transconductance, semi-remote cut-off, pentode amplifier. It is designed for service as an automatic gain controlled IF amplifier in 150mA. series heater operated television receivers.
$13.90
Vacuum Tube - 6HS6, Pentode, Sharp Cut-Off, RF
Sharp cutoff pentode of the 7 pin miniature type with heater having controlled warm-up time.
$39.90
Tube Set - for Fender Bandmaster Blackface and Silverface
Requires:
- 2 × 6L6
- 3 × 12AX7
- 1 × 12AT7
Tube Set - for Fender Showman Blackface and Silverface
Requires:
- 4 × 6L6
- 3 × 12AX7
- 1 × 12AT7
Resistors - 2 Watt, Metal Oxide, Power
Metal Oxide resistors are for applications where stability under high temperature conditions is required. Sold in multiples of 5. 2 watt. ±5% tolerance
Turret Board - Blank, 189 Holes, 10-⅛" x 2-⅝"
Blank board, 10-1/8" x 2-5/8", 189 3mm holes on 3/8" centers.
For vintage style phenolic boards, see P-HTUR-189-BRN and P-HTUR-216-BRN.
Colors Available:
- Blue, Green, Yellow: 2 mm board thickness
- Black, Red: 3 mm board thickness
For vintage style phenolic boards, see P-HTUR-189-BRN and P-HTUR-216-BRN.
Starting at $6.55
Tool - Precision Devices, Lead Former, Various Sizes
High quality, made in USA lead formers. These are great tools for bending component leads to fit various footprints. The radiused ends provide a right angle bend that does not stress the metal lead. These lead formers are made of high impact ABS plastic.
$5.59