You are here

Accessories

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
K-930Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive.
This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions. All you need to provide is solder and soldering iron.
The Persuader allows for easy access to the tube, giving you the ability to quickly experiment with different tube brands and 12AX7 tube relatives.
Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$64.95
Click to read more
S-VIBRA5-4Vibrapod Isolator - Model 5, Package of 4
Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane.
$25.00
Click to read more
S-M560Fish Paper - GC Electronics, fibroid, for insulation
Vulcanized Cellulose Fiber for all electrical insulation. Gray insulating paper. .010" thick. used in switches, under terminals, in transformers, etc .where mechanical strength is required.
Dielectric strength 3000 volts. 10" wide roll contains 240 sq. inches.
$5.25
Click to read more
S-VIBRACONEVibrapod Cone - 25 lb Support, Can Use with Vibrapods

Vibrapod Cones



  • Double trunctuated vinyl cone with 7/16 stationary chrome ball (it does not roll).
  • 1" tall by 1 5/8" diameter. 25 lbs maximum weight each.
  • Designed for use with Vibrapod isolators or by themselves.
  • Suitable for CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrateds, Turntables, Speakers


Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes.


$8.00
Click to read more
K-950Effects Pedal Kit - MOD® Kits, The Thunderdrive, Overdrive
The Thunderdrive is an overdrive pedal kit that will provide a signal boost at low gain settings and its own distortion at maximum gain settings. You can use it to push your preamp into overdrive or as a source of smooth distortion. Adjusting volume control and gain control results in a wide variety of tones in spite of its simple construction.
This pedal is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. Using point to point wiring and easy to follow instructions you can have a working overdrive pedal in a matter of hours.
All you need to provide is solder and a soldering iron. Uses 9 volt battery which is not included.
$29.95
Click to read more
P-GSF-1Guitar Strap - Fender, Deluxe Vintage, Black
Modeled after Fender's original vintage straps but updated for comfort, the shoulder pad is extra thick for comfort, and includes a replica of the original Fender® buckle. This one is extra long, too. Color: Black
$19.50
Click to read more
P-GSF-2Guitar Strap - Fender, 2", Vintage, Tweed
The look of genuine tweed used on Fender® amps and guitar cases, but designed for comfort. Brown leather ends tabs complete the look of the 2" strap
$11.95
Click to read more
K-955Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe, Overdrive
The Thunderdrive Deluxe is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting volume control and gain controls provides a wide variety of tones in spite of it's simple contruction.
The Turbo switch provides an additional boost in volume and less internally generated distortion. The pre-painted black enclosure, red control knobs and red LED indicator give the Thunderdrive Deluxe an understated attractive finish. It is capable of overdriving the preamp section of your guitar amp or adding it's own layer of distortion at lower volume.
This is an easy build kit with point to point wiring and clear, easy to follow instructions. The current draw of this pedal is very low at 1.3 milliamps, allowing for long battery life. All you need to provide is solder, soldering iron and a few simple tools.
$39.95
Click to read more
P-GSF-4Guitar Strap - Fender, 2", Black, Yellow Logo

Made from black poly-webbing, these 2" straps feature the Fender® logo embroidered in Yellow


$6.75
$5.95
You save: 12%
Click to read more
M-PP100Attenuator - Recycled Sound, Power Plug 100, -30dB
The Power Plug 100 offers the same -10db as the Power Plug Lite (M-PPLITE) but adds another "Bedroom Level" pot for further attenuation of up to -30db AND is suitable for amps up to 100 watts!
Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume. So you can adjust your amp as usual and use the attenuator as an overall Master volume.
$189.95
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Accessories