You are here

Accessories

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(2 pages)
K-920Effects Pedal Kit - MOD® Kits, The Piledriver, Power Boost

"The PileDriver" is a clean boost kit that will provide up to 38dB of gain to your guitar signal. Use it to push your preamp into overdrive or as a line driver if you are experiencing signal degradation from your effects chain. This is a simple kit and great for beginners!


$24.95
Click to read more
K-930Effects Pedal Kit - MOD® Kits, The Persuader, Tube Drive
Build your own tube preamp pedal built around a 12AX7 tube. Go from clean, warm tone to smooth, real tube overdrive.
This kit includes pre-drilled die-cast aluminum enclosure and all parts with easy to follow instructions. All you need to provide is solder and soldering iron.
The Persuader allows for easy access to the tube, giving you the ability to quickly experiment with different tube brands and 12AX7 tube relatives.
Operates on a 9V battery or AC adapter, which is not included. When completed, this pedal draws considerable current and battery life will be short. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$64.95
Click to read more
K-955Effects Pedal Kit - MOD® Kits, Thunderdrive Deluxe, Overdrive
The Thunderdrive Deluxe is an overdrive pedal kit that will provide a strong clean signal boost in the early gain settings and smooth distortion at maximum gain settings. Adjusting volume control and gain controls provides a wide variety of tones in spite of it's simple contruction.
The Turbo switch provides an additional boost in volume and less internally generated distortion. The pre-painted black enclosure, red control knobs and red LED indicator give the Thunderdrive Deluxe an understated attractive finish. It is capable of overdriving the preamp section of your guitar amp or adding it's own layer of distortion at lower volume.
This is an easy build kit with point to point wiring and clear, easy to follow instructions. The current draw of this pedal is very low at 1.3 milliamps, allowing for long battery life. All you need to provide is solder, soldering iron and a few simple tools.
$39.95
Click to read more
K-960Effects Pedal Kit - MOD® Kits, The Trill, Tremolo
The Trill tremolo pedal offers classic tremolo tones in an easy to build kit. The Trill's speed knob provides a wide range from a very slow to rapid fire effect. The depth knob varies the ratio between effected and dry signal.
Using modern, low noise transistors makes operation of The Trill quiet with no signal drop when engaged. The Trill uses true bypass foot switching so it is out of the signal path when not engaged.
All you need to provide is solder and tools! Uses 9 volt battery which is not included.
$43.95
Click to read more
K-915Effects Pedal Kit - MOD® Kits, The Verb Deluxe, Digital Reverb
The Verb Deluxe kit is built around the Belton Digi-Log Mini Module (P-RBTDR-2H-X) for a great digital reverb sound. The Belton Digi-Log module was built as a replacement for traditional spring reverberation units.
Features include both Dwell and Mix controls, allowing the dry signal to be blended with the processed signal from a just hint of reverb to deep, cavernous echoes.
The dwell control adds an extra flexibility, providing a full palette of sweet reverb sound.
The effect pedal operates on a 9V battery. For a longer lasting option, a 9-volt adapter can be purchased separately. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
$79.95
Click to read more
K-950Effects Pedal Kit - MOD® Kits, The Thunderdrive, Overdrive
The Thunderdrive is an overdrive pedal kit that will provide a signal boost at low gain settings and its own distortion at maximum gain settings. You can use it to push your preamp into overdrive or as a source of smooth distortion. Adjusting volume control and gain control results in a wide variety of tones in spite of its simple construction.
This pedal is capable of overdriving the preamp section of your guitar amp or adding its own layer of distortion at lower volume. Using point to point wiring and easy to follow instructions you can have a working overdrive pedal in a matter of hours.
All you need to provide is solder and a soldering iron. Uses 9 volt battery which is not included.
$29.95
Click to read more
M-OD808Effects Pedal - Maxon, OD808, Overdrive
The Original Overdrive! The OD808 is often imitated but never matched! Identical to the 1970s circuit and featuring the JRC4558 IC chip, it offers warm, smooth, transparent overdrive that'll make your rig scream!
The OD808's dynamically responsive circuitry reacts precisely to individual playing styles, letting the true voice of any instrument or artist shine through. Don't settle for copies when you can have the original.
The OD808 Reissue offers up all the warm, creamy, organic overdrive as the original and then some. Never one to rest on their laurels, Maxon has tweaked the current version ever so slightly to reduce noise level while retaining the legendary “808" tone.
The OD808 is the perfect pedal for adding smooth, tube-like overdrive to any clean amp – use it as a secondary dirt channel to beef up a song's chorus section, or keep it on all the time for the crunchy tone that has defined rock and roll.
$149.00
Click to read more
M-OD9Effects Pedal - Maxon, OD9, Overdrive
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists.
Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
While the M-OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar. Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue – this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching.
$159.00
Click to read more
M-RAT2Effects Pedal - ProCo, Rat-2, Distortion
The RAT2 is the classic distortion pedal in the Pro Co RAT family. It has a unique tone structure that other effect devices are measured against.
The beauty of the RAT 2 lies in its versatility. Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads. Do you have a powerful amp with too much headroom for the gig? The RAT 2 nails that sweet spot where a tube amp goes from sparkly clean to warm overdrive. Maybe you already love your amp's distortion. Use the RAT 2 as a boost for solos and get the extra kick you need.
The RAT 2 features the legendary RAT Filter control. Turn it to the right to roll off brittle high-end frequencies. Having trouble cutting through the mix? Turn the Filter down and allow the natural brightness of your instrument to shine through.
$79.95
Click to read more
K-975Effects Pedal Kit - MOD® Kits, Ring Resonator, Octave-Up Fuzz
The Ring Resonator is the newest member of the MOD® Kits DIY family. Order now to be one of the first people to get this new octave up fuzz pedal!
The Ring Resonator kit is an octave up fuzz effect; an all analog design that captures those late '60s octave-up fuzz tones. Transformer coupled germanium diodes produce sounds that range from a subtle octave up to thick, harmonically rich sonic textures and synth-like tones. Experimenting with different pickups and tone control settings on your guitar with the Ring Resonator can also produce sitar-like sounds.
MOD® Kits are designed to give novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy-to-follow instructions and use point-to-point wiring. A pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
The effect pedal operates on a 9V battery.
$64.95
Click to read more

Pages

(2 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Accessories