You are here

Accessories

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(9 pages)
K-MOD101Amp Kit - MOD® Kits, MOD101 guitar amplifier

MOD 101 Guitar Amp Kit Features:



  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 60W output power into 4, 8, 16 and 20 Ω
  • 1 channel with customizable: tone stack, power tubes, negative feedback, input miller capacitance volt divider/LP filter, and preamp cathode bypass cap (all parts included)
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • DPDT power switch circuit for instant high-voltage drain in power-off
  • Standby Switch

$465.00
Click to read more
K-MOD103Effects Kit - MOD® Kits, The Wave, Spring Reverb
The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.

The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a footswitch. Footswitch sold separately (see P-H470 for compatible footswitch).
$275.00
Click to read more
K-MOD102-PLUSAmp Kit - MOD® Kits, MOD102+ guitar amp

The MOD102+ expands on the same all analog vacuum tube classic American circuit design combined with a British style Class A output section as the Original MOD102 with some much added special “+” features. These special features include a three position progressive toggle switch for off-standby-power and additional push-pull functionality for each control - pull out the bass control knob for “mid boost”, pull out the treble control knob for “bright”, pull out the volume control knob for “turbo”.


$265.00
Click to read more
K-MOD102-FAmp Kit - MOD® Kits, MOD102 guitar amp (Non-US Version)

The MOD102-F is the foreign (non-USA) version of the MOD 102 including a Hammond 369EX world power transformer instead of the 269EX. Please note: there is no power cord included with this kit (due to variations in electrical outlets around the world). You will need to find a power cord that can fit through the 1/4" diameter (6.35 mm) rubber grommet hole on the rear panel.


$250.00
Click to read more
K-MOD102Amp Kit - MOD® Kits, MOD102 guitar amplifier

For the non-US version of the MOD 102, please see K-MOD102-F MOD 102 Guitar Amp Kit Features:



  • All Tube Design (solid-state diodes used only for full-wave rectification)
  • 5W output power into 8 Ohm
  • 1 channel
  • Vintage channel controls: bass, treble and volume
  • Vintage pilot lamp and screw-on jewel cover for power-on indication
  • Output Impedance: 8 Ohm
  • Tubes included: one 12AX7 (preamp), one EL84 (JJ Electronic brand)
  • Hammond Mfg 269EX power transformer and P-T31 single ended output transformer
  • Cathode biased class

$215.00
Click to read more
M-PP100Attenuator - Recycled Sound, Power Plug 100, -30dB
The Power Plug 100 offers the same -10db as the Power Plug Lite (M-PPLITE) but adds another "Bedroom Level" pot for further attenuation of up to -30db AND is suitable for amps up to 100 watts!
Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume. So you can adjust your amp as usual and use the attenuator as an overall Master volume.
$189.95
Click to read more
M-OD9Effects Pedal - Maxon, OD9, Overdrive
Improved circuitry featuring the JRC4558 IC yields the ultra-smooth, creamy, dynamic overdrive so sought after by guitarists.
Overdrive and output level controls adjust the intensity of overdrive and output volume, while the Hi Boost/Hi Cut Tone control adjusts the brightness from warm and smooth to sizzling hot.
While the M-OD808 may have been the first overdrive circuit of its kind, it was the OD-9 that cemented this sound in the history of Rock & Roll guitar. Looking at the OD-9's circuit, you'll realize that this is not some redesign being cleverly marketed as a reissue – this is THE original OD-9 (TS-9) circuit, yet with the addition of true bypass switching.
$159.00
Click to read more
M-OD808Effects Pedal - Maxon, OD808, Overdrive
The Original Overdrive! The OD808 is often imitated but never matched! Identical to the 1970s circuit and featuring the JRC4558 IC chip, it offers warm, smooth, transparent overdrive that'll make your rig scream!
The OD808's dynamically responsive circuitry reacts precisely to individual playing styles, letting the true voice of any instrument or artist shine through. Don't settle for copies when you can have the original.
The OD808 Reissue offers up all the warm, creamy, organic overdrive as the original and then some. Never one to rest on their laurels, Maxon has tweaked the current version ever so slightly to reduce noise level while retaining the legendary “808" tone.
The OD808 is the perfect pedal for adding smooth, tube-like overdrive to any clean amp – use it as a secondary dirt channel to beef up a song's chorus section, or keep it on all the time for the crunchy tone that has defined rock and roll.
$149.00
Click to read more
M-PPLITEAttenuator - Recycled Sound, Power Plug Lite, -10dB
The Power Plug Lite offers up to -10db attenuation in a rotary switch with -2db increments. The Power Plug Lite will accept all impedances and is rated for up to 50 watt amps. The same cool extruded aluminum case as the original Power Plug (M-ATT-6-12) for those who want a lighter touch and more control.
Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume.
$114.95
Click to read more
K-985Effects Pedal Kit - MOD® Kits, The Wahtz, Wah
The Wahtz Wah Pedal Kit produces the classic Wah tone you've come expect with a hint of extra bite and growl.
True bypass switching insures no loss of signal when the Wah effect is not engaged; and the long life potentiometer manufactured specifically for use in Wah pedals is included to provide years of smooth, quiet operation.
Point to point construction allows advanced kit builders to easily experiment with modifications to further tailor the tone to more individual tastes.
MOD® Kits and Assemblies are designed to give novice and experienced musicians the opportunity to build or modify their own amps, effects pedals and guitars. All kits come with easy-to-follow instructions and use point-to-point wiring. All effect pedals and amplifiers come with a pre-drilled enclosure and all necessary parts are included. All you need to provide are hand tools, a soldering iron and solder.
$109.95
Click to read more

Pages

(9 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Accessories