Amplifier Parts

Jewel - Fender Style, for lamps / bulbs
Colors Available:
Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 27. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.
Starting at $2.99
Dial Lamp - Fender Style, Premium Pilot Assembly
Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
$3.95
Caster - Swivel, 2" wheel, Fender Replacement
Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 45.359Kg / 100Lb.
Starting at $2.70
Fuse Holder - for Fender®, 3AG-Type
High quality Fender® Style fuse holder replacement for guitar amplifiers.
  • Fits ½" chassis hole diameter
  • Mounted by Nut
$2.75
Strain Relief - for ~\frac{35}{64}~" x ⅝" Hole, ~\frac{11}{32}~" Cord Diameter
For 35/64" x 5/8" chassis hole, 11/32" cord diameter. Fits most Fender® amps.
  • Protects the lifeline of your electric/ electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.
  • Securely anchors, insulates, and protects cables at panel entry points
$0.59
Chassis Strap - generic, for mounting amplifier
Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.
Starting at $2.20
Corner - Steel, 2-Hole, 18 Gauge, ¾" Thickness
Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.
  • Works on ¾" of wood + material thickness
  • 18 gauge steel
  • 12mm / ½" radius
  • For Fender®
  • Sold individually.
$1.08
Handle - Fender or Peavey Style, Black strap with metal caps
Cap Colors Available:
Replacement handle for Fender®, Peavey®, and other amps (8.25" from mounting center to mounter center). The rubber handle is steel reinforced with steel straight end caps. Mounting hardware sold separately.
See P-H261B for angular end caps.
Starting at $3.19
Foot - Chrome Glides, ~\frac{15}{16}~" diameter
Chrome glides in package of 4. Diameter: 15/16" Includes 7/8" wood screws
$3.95
package of 4
Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
Starting at $1.25
package of 4
Handle - Fender Style, Strap, 6.375” Spacing
Colors Available:
Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)
$9.70
Screw - #8 x 3/8”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.
$1.89
package of 5
Screw - #6 x 5/16”, Phillips, Pan Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws with blunt tips. These pan head #6 screws have a length of 5/16” and are commonly used to secure 9-pin sockets and other hardware to the chassis of blackface and silverface amps. These are also used in some tweed amps for securing the fiberboard and other hardware to the chassis. For the larger #8 blunt tip machine screws found in vintage Fender® amps, see S-HBS8-38.
$1.29
package of 5
Handle - Fender Style, Strap, 6.5” Spacing
Colors Available:
High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".
$10.65
Screw - #8-32 x 1-1/16” Rosette Head, Machine, Brass-plated
#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.
$1.89
package of 4
Nut - Hex, Stainless Steel, Imperial Thread
Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
$0.89
package of 5
Handle - Fender style, Dogbone shape
Colors Available:
Retro fit for Fender, Molded dogbone style. 6" center to center. Replacement for Fender: 099-0946-000. For handle mounting hardware, see part number S-H105.
$7.68
Screw - #10 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.
$1.95
package of 5
Screw - #6-32 x 1 ¼” Rosette Head, Machine, Bronze-plated
#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.
$1.89
package of 4
Screw - #3 x ⅜”, Phillips, Oval Head, Wood, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.
$1.59
package of 5
Handle - Case, Fender style, 4.5" center to center
Colors Available:
For Fender and other cases. 4 1/2" center to center.
Starting at $4.85
Screw - #8 x ¾”, Phillips, Flat Head, Sheet Metal, Stainless Steel
18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.
$1.59
package of 5
Screw - #8, Phillips, Oval Head, Wood, Nickel-plated
#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.
Starting at $2.15
package of 4
Handle - Fender Style, Black strap, Black Metal Caps
Replacement handle for Fender® and other amps (8.27" from mounting center to mounting center). The rubber handle is steel reinforced with steel angular end caps. Mounting hardware sold separately.
$4.29