Amplifier Parts

Corner - Marshall Style, Textured Black Plastic, 4-Hole, Rear
Marshall style back corner made of black plastic with a textured surface. These corners feature ¾" radius for the outer edge and a 90° angle for the flat back edge. These corners are a great option for amplifier cabinets and other equipment. Similar to the genuine Marshall back corners P-H1090.
$1.09
Fuse Holder Cap - Peavey, top-slotted for screwdriver
Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.
$5.65
Vent - Marshall, for top, plastic construction
Top plastic vent for Marshall AVT50 and others, 10 5/6" x 1 9/16".
$4.95
Handle - Ampeg Style, Brown Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$21.80
Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
$2.15
package of 5
Turrets - Bifurcated, for use on 2mm boards
Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.
$2.30
package of 10
Dial Lamp - #41, T-3-¼, 2.5V, .50A, Screw Base
Package of 10. Long life general replacement lamps for dials, indicators, etc.
$3.00
package of 10
Handle - Ampeg Style, Blue Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$17.95
Handle - Marshall Style, Black Vintage, Gold Caps, Large
Black/gold, vintage Marshall style handle. Gold end caps and inner clamps included. Mounting screws not included
$16.75
Label - 4-Band Resistor Color Code Chart
Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.
$2.95
Rivets - Marshall, Gold, for fastening
Gold rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Out of Stock
Corner - Marshall, Black Plastic, 3-Hole, with rivets
Genuine Marshall front corner set. These corners feature 3/4" radius and three mounting holes. These corners can be used on both straight and slanted cabinets. Includes gold mounting rivets. Sold in package of four corners.
For similar generic front corners, see P-H3081.
$6.75
package of 4
Out of Stock
Amp Cover - For Fender '70s Twin Reverbs
Vintage style using only the finest tolex available.
  • Height: 19"
  • Width: 26.5"
  • Depth: 11"
$35.33
$29.79
package of 9
Dial Lamp - #53, G-3-½, 14.4V, .12A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
package of 10
Vent - Brass, Replacement for Vox / Marshall
Tube Amp Doctor has created an exact replica of the vents used on Vox® amps and the Marshall® Super PA. These high quality brass ventilation grills are hand crafted. Measures 0.720" x 4.805".
$8.50
Screw - 1", Flat top Phillips, Stainless Steel
1" stainless steel Phillips head, flat top screw.
$1.45
package of 4
Fuse Holder - 3AG-Type, Tweed Style, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.
$5.95
Finishing Washer - #4, Countersunk
#4 finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.
Starting at $1.35
package of 10
Screw - #4 x ½”, Slotted, Oval Head, Wood, Nickel-plated
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
$1.79
package of 5
Logo - Vox™, Gold plastic, large size
Original VOX™ large logo.
  • Fits AC30
  • Gold, plastic logo.
  • 34mm height x 107mm length
$20.95
Handle - Leather amplifier-style strap with mounting hardware
Colors Available:
Vintage amplifier-style leather strap handle. Includes two mounting brackets.
$18.45
Amp Cover - Replacement for Fender® Princeton Reverb
Vintage style using only the finest tolex available.
  • Height: 16"
  • Width: 20.5"
  • Depth: 9"
$32.93
Label - Quality Assurance, Vintage Style Sticker
Vintage style quality assurance label. This label has an electronic test line for the name of a technician responsible for testing the electronics and a sound test line for the name of a technician responsible for testing the functionality of the device. This sticker is a great way to document quality assurance testing with a professional presentation on the chassis of a pedal or amp.
$1.95