Amplifier Parts

Corner - Marshall Style, Textured Black Plastic, 4-Hole, Rear
Marshall style back corner made of black plastic with a textured surface. These corners feature ¾" radius for the outer edge and a 90° angle for the flat back edge. These corners are a great option for amplifier cabinets and other equipment. Similar to the genuine Marshall back corners P-H1090.
$1.09
Amp Cover - Fender®, for 65 Deluxe Reverb
Black polyester cover or '65 Deluxe Reverb, black. Designed to fit '65 Deluxe Reverb® Reissue (1993-present) and Super-Sonic™ 22 Combo (2010-present) amplifiers
$20.95
Screw - #6 x 1”, Slotted, Oval Head, Wood, Nickel-plated
#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$1.75
package of 4
Dial Lamp - #40, T-3-¼, 6.3V, .15A, Screw Base
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
package of 10
Dial Lamp - #41, T-3-¼, 2.5V, .50A, Screw Base
Package of 10. Long life general replacement lamps for dials, indicators, etc.
$3.00
package of 10
Amp Cover - For Fender Vintage Silverface Champ
Vintage style using only the finest tolex available.
  • Height: 14"
  • Width: 17"
  • Depth: 7"
$20.35
Fuse Holder - 3AG-Type, Tweed Style, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.
$5.95
Handle - Pocket, Black, Plastic, Recessed for Cabinet
Black pocket handle for cabinets. These recessed handles are made of a thick and durable plastic. They sit nearly flush to the side of a cabinet for a clean look that still provides a solid grip when carrying the cabinet.
$4.95
Handle - Marshall, Black Metal, for 1960HW
Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.
$18.85
Out of Stock
Foot - Rubber, ¼" tall with ½" diameter, countersunk
1/4" tall x 1/2" outside diameter. Interior through hole diameter is 1/8". A counter sunk hole for the screw or nail (not included) is ¼" diameter x 3/16" deep
$3.25
package of 4
Handle - Ampeg Style, Black Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$17.95
Handle - Marshall Style, Black Plastic, Nickel Hardware
Marshall style amp handle. Black plastic handle with two nickel end caps and two inner clamps for mounting. 9 3/4" center to center mounting slots.
$13.95
Amp Cover - For Fender '70s Twin Reverbs
Vintage style using only the finest tolex available.
  • Height: 19"
  • Width: 26.5"
  • Depth: 11"
$35.33
Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Starting at $8.95
Out of Stock
Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
$2.15
package of 5
Handle - Ampeg Style, Blue Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$17.95
Insulation Cover - Fuse Holder, 15.5 x 36.8mm, PVC
High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features
  • Provides insulation against shock on rear of fuse holder
  • PVC
  • UL94V-0 rated flame retardant material

Fits S-H205
$2.65
Snubber Kit - eliminate fuzz from amplifier
Snubber parts kit for circuits. Used to build a "snubber circuit" to remove unwanted high frequencies and high voltages resulting from output transformer ringing in a guitar amplifier, without the "brick wall" effect of using diodes.
Starting at $8.25
Replacement Fuse Holder Cap - For P-SP2-500
Fuse holder cap replacement for P-SP2-500 power receptacle.
$1.00
Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
$11.95
Screw - #4 x ½”, Slotted, Oval Head, Wood, Nickel-plated
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
$1.79
package of 5
Screw - #8 x 1 ¾”, Slotted, Oval Head, Wood, Nickel-plated
#8 x 1 ¾” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.
$2.59
package of 4
Dial Lamp - #53, G-3-½, 14.4V, .12A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
package of 10
Vent - Marshall, for top, plastic construction
Top plastic vent for Marshall AVT50 and others, 10 5/6" x 1 9/16".
$4.95