Amplifier Parts

18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.

Replacement latch for Ampeg Flip Top. For use with P-H300-TOP. All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10

Marshall style amp handle. Black plastic handle with two nickel end caps and two inner clamps for mounting. 9 3/4" center to center mounting slots.

Danger high voltage label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for smaller areas like circuit boards, components, heatsinks and other areas inside the chassis.

Genuine Marshall™ large plastic vent. Measures 17 5/8" in length and 3" in width.

Fits straight 4 X 12 cabinets.
Vinyl Cover for Marshall 1960B Straight-front Cabinet, with Piping and Marshall Logo

Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.

5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.

• 5mm size
• Tinted and diffused
• Multiple colors available
• Package of 5

Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.

Two rows of 30 U-style terminals (60 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

Industry standard 3-leg back side corner cover for vinyl or carpet covered cabinets. 18 gauge steel, 1/2" radius. Sold individually. See S-H101 for mounting hardware.

1 ½" diameter x 1 3/16" high with metal washer. Sold individually.

Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Vintage style using only the finest tolex available.

• Height: 19"
• Width: 26.5"
• Depth: 11"

Vintage style phenolic turret boards with a 3mm thickness. The phenolic material matches the appearance and construction of those used in classic amplifiers from Marshall and others. These boards are made of the highest grade phenolic material and are rated for high voltage applications. They have a high mechanical strength in addition to their high dielectric strength making them the perfect candidate for turret board based tube amplifiers.
This 189 hole version has 7 rows and 27 columns. This size can be found in vintage Marshall amps such as the 1973 and 1974 18W amps, 20W amps such as the 2022T JMP Tremolo 20, 2061 Lead-Bass, PA20, and the 10W 1930 Popular.
Complete the vintage turret board look with S-HTUR-PR-BI-3S turrets.

Ampeg-style strap handle. Black. Center to center measurement is 6". Can be used on other amplifiers.

Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.

• 11/16" chassis hole
• Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
• Rating: 125V, 75W
• Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123

Stainless steel lock washers that use external teeth for locking and tension. The external teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.

Recessed black metal handle for installation in cabinets

High quality Fender® Style fuse holder replacement for guitar amplifiers.

• Fits ½" chassis hole diameter
• Mounted by Nut

Silver rivets for fastening amplifier corners. For use on all Marshalls.

Bifurcated turrets for use on boards measuring 2mm thick. Made of nickel plated copper. These are sometimes referred to as split or forked turrets. For use with 3mm boards, see S-HTUR-BI-3S. Stake and anvil required for mounting. Staking Tool is our part number S-T1715. Anvil is our part number S-T1717. For a budget tool set see S-T-STAKE-SET.

Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part number: 099-3900-000