Amplifier Parts

Foot - Rubber, 0.75" Tall, Tapered, 1.625" Top, 1.25" Bottom
Rubber tapered feet with a non-threaded screw hole and a steel washer insert. Sold in a package of 4. Perfect feet for amplifier cabinets or amp heads.
$3.95
package of 4
Spacers - Round, Aluminum, fits 4-40, 3/16” OD
Round spacers made of aluminum that fit 4-40 or M3 threaded screws. These non-threaded aluminum spacers visually match the PCB and turret board standoffs found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The outer diameter is 3/16”. These will also work well in many other types of projects. Pairs with S-HSB4-114 screws, S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
$1.19
Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
Starting at $1.25
package of 4
Cord - Replacement Black, Non-Polarized
Black SPT-1 power cable
  • non-polarized
  • tinned leads
  • 6 foot length
  • 18 AWG.
$2.44
LED Bezel - with included 3mm Red LED
Bezel Assembly with 3mm Red LED. Required hole size: 0.25". Washer and hex nut included. LED Specifications: Color Red Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°
$1.05
Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.15
package of 5
Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Protect your expensive investment or hobby with inexpensive fuses.
Starting at $2.25
package of 5
Fuse Block - for 3AB and 3AG fuses, low profile
Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
$3.10
LED Bezel - with included 5mm Red LED
5 mm diameter Red LED with holder. Perfect for amps and effects. Mounts in a 5/16" diameter chassis hole.
$1.40
Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
  • 9 pin (noval) socket hole cover
  • 5mm x 3.5mm mounting holes
  • 27.1mm center to center

P-ST8-CVR
  • 8 pin (octal) socket hole cover
  • 6.5mm x 3.5mm mounting holes
  • 40mm center to center

P-ST8-ST9-CNVRT
  • 8 pin to 9 pin (octal to noval) socket adapter
  • Bottom mount 9 pin socket recommended
Starting at $2.50
Turret Board - Blank, 189 Holes, 10-⅛" x 2-⅝"
Colors Available:
Blank board, 10-1/8" x 2-5/8", 189 3mm holes on 3/8" centers.
  • Blue, Green, Yellow: 2 mm board thickness
  • Black, Red: 3 mm board thickness

For vintage style phenolic boards, see P-HTUR-189-BRN and P-HTUR-216-BRN.
Starting at $6.55
Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Starting at $6.50
Label - display model info, vintage-style sticker
Vintage style model information label. This label has a line for a model name or number, the serial number, builder name or company, and the build date. This sticker is a great way to provide build info with a professional presentation on the chassis of a pedal or amp.
$1.39
Screw - 1", Phillips, Oval Head, Matching T-Nut
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.99
package of 4
Receptacle - IEC C14, Snap-in Panel Mount
High quality snap-in IEC C14 power entry connector. The connector is easy to install and is rated for 250VAC at 15A. The quick disconnect terminals can also be directly soldered to. Features:
  • High quality thermoplastic housing
  • Copper alloy terminals (4.8mm width)
  • Quick installation
  • Fits 0.8mm to 2mm thick panels
$2.29
Handle - Fender Style, Strap, 6.375” Spacing
Colors Available:
Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)
$9.70
Chassis Strap - Fender, vintage amplifier
Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
$9.95
package of 2
Optocoupler - XVive, VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
$8.40
On Backorder
Fuse Holder - 3AG-Type, Low Profile, Knob, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.
$5.95
LED - 5mm, Water Clear, High Brightness, Package of 5
Colors Available:
High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 5mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Starting at $1.35
package of 5
Corner - Black Steel, 2-Hole, 18 Gauge, Wraparound, Lip
2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
$1.65
Handle - Ampeg Style, Black Vintage, Black Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
$13.95
Finishing Washer - Blackface / Silverface, Plated Metal
Colors Available:
Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found in many vintage blackface and silverface amplifiers and cabinets. This style is most typically used on front grill and baffle board mounting screws in these amps and cabinets. Fits with #8 countersunk screws.
Starting at $1.25
package of 10
Nut - Hex finished, fine thread, zinc
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Starting at $0.30
package of 5