Amplifier Parts

Flanged finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flanged finishing washers found on later blackface and silverface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the earlier flush style finishing washers used on these amps, see S-HXFW-1N.

Black plastic handle with black end caps. Mounting centers adjustable from 8" to 8.75". 9 5/8" handle length without end caps. Screws not included.

Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length. Fits into S-H213

General purpose square aluminum handle. 7.6" by 1.6".

Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.

Package of 4 rubber feet (15/16" diameter x ⅜" height) mounting hole is good for #6 screws.

Black plastic clamp for mounting speaker grills. Sold individually, mounting hardware not included.

Bezel Assembly with 3mm Red LED. Required hole size: 0.25". Washer and hex nut included. LED Specifications: Color Red Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°

Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.

Indicator light, square. 6 Volts. Measures: 0.44" Length x 0.44" Width x 0.27" Depth

Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.

Plexi style pilot lights that operate on 120VAC. These lights match the style used on many vintage Marshall amplifiers. The lights use a neon bulb with an internal current limiting resistor so no external circuitry is required for use. The mounting diameter hole is 0.380” (9.65mm). Includes an internal tooth lock washer and hex nut.

Marshall back corners with gold rivets. 3/4" radius.
For similar generic back corners, see P-H3080.

#6 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on vintage style Fender® Stratocaster® bridges mounted directly to the body using six screws.

Vintage style using only the finest tolex available.

• Height: 16"
• Width: 20.5"
• Depth: 9"

Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.

Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found in many vintage blackface and silverface amplifiers and cabinets. This style is most typically used on front grill and baffle board mounting screws in these amps and cabinets. Fits with #8 countersunk screws.

8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

For Fender and other cases. 4 1/2" center to center.

Open frame fuse block for GMA or GMD 5×20mm size fuses with a low profile design that features solder terminals made of tin plated brass. A unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance.

The 3AG Slo-Blo fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. Fits fuse block S-H259 and fuse holder S-H201.

High quality chassis hole covers for a wide variety of hole sizes. These covers use tapered tabs that easily snap into the hole to securely hold the cover in place. If a more permanent solution is required, the metal tabs can be bent outward after installing to secure the hole cover to the chassis. These nickel plated covers are a great way to modify an existing chassis or cover up mistakes. This list shows some common hole sizes for a variety of parts used on amplifiers, pedals and other equipment.

Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.

Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.