Amplifier Parts

0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.

High quality large rubber feet with steel washer inserts. These feet are made of a durable textured rubber. The diameter is 1.5” and the height is .75”.

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".

High quality small rubber feet with steel washer inserts. These feet are made of a durable rubber. The diameter is 1” and the height is .56”.

Clip for square Marshall indicator lights - used to secure the indicator lights in place

I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses

PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.

300mm x 60mm turret board conveniently pre-loaded with 2 rows of 30 turrets. Save yourself some time loading the board and move on to building your project!

• Accepts 2mm turrets.

4-40 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 4-40 size works in place of original M3 screws that were used for the AC inlet, noval sockets, PCB and turret board standoffs, and the P-H1700 and S-HM100-A rotary selectors. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. Use with S-ASP4-X spacers for board standoffs. S-HBWX flat washers are also available.

Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.

Keep your amplifier protected and looking great by replacing missing or damaged feet with new genuine Fender nickel-plated "Sphinx Glide" amplifier feet. Metal amplifier cabinet glide feet with rubber bushings and mounting screws. Fender part number: 099-3900-000

Oversized blank G-10 epoxy boards perfect for custom turret or eyelet boards. The large size can be cut down to make multiple boards. With no predilled holes, builders can make clean custom layouts for their projects.

Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.

High quality chrome glides with a 1 inch diameter and 0.36 inch height. The mounting hole diameter is 0.16 inches. These glides are a close match to the original Sphinx glides used on 60s Fender® amps. Sold individually.

Small swivel caster with a black wheel having 50mm diameter x 21mm width. Four ¼" diameter mounting holes. Mounting hardware not included.

Industry standard 3-leg back side corner cover for vinyl or carpet covered cabinets. 18 gauge steel, 1/2" radius. Sold individually. See S-H101 for mounting hardware.

Original Marshall caster and socket with a black wheel having 50mm diameter x 20mm width. Used on 1960A, 1960B and other cabinets. Package of one includes four mounting screws. Caster screws into black plastic socket base.

Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.

• Genuine Fender Blackface amplifier logo
• Mounting screws included
• Designed for Super-Sonic™ series, ’94 Twin-Amp™, Pro Reverb™, Prosonic™, Concert Reverb™, ’65 Twin Reverb®, ’65 Deluxe Reverb®, ’65 Super Reverb®, Machete™, ’65 Princeton® Reverb, ’64 Vibroverb™, ’68 Custom Princeton, ’68 Custom Twin Reverb, ’68 Custom Deluxe Reverb, Steel King, Jazz-King™, Cyber Twin®, VM series, Princeton Recording Amp, Bassman® Pro series, Stage™ 1000, Deluxe™ 900 and Princeton 650 amplifiers plus others.

Panel mount LED lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:

• 0.171” mounting hole
• For panel thicknesses of 0.031” to 0.125″
• Fresnel lens
• Low Profile
• Fits standard 3mm LEDs

For a version that fits 5mm LEDs, see P-L710-X.

Replacement latch for Ampeg Flip Top. For use with P-H300-TOP. All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.

#6 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.

Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:

• Rated current: 10A
• Rated voltage: 250V AC
• Contact resistance: 2MΩ @ 250V DC or less
• Dialectric withstand: 1 minute @ 1500V AC
• Insulation resistance: 100MΩ or more @ 500V DC

Plexi style pilot lights that operate on 120VAC. These lights match the style used on many vintage Marshall amplifiers. The lights use a neon bulb with an internal current limiting resistor so no external circuitry is required for use. The mounting diameter hole is 0.380” (9.65mm). Includes an internal tooth lock washer and hex nut.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.