1. Home
  2. Products
  3. Amplifier Parts

Amplifier Parts

products per page
P-H9600 Foot - Rubber, 1.5" diameter x .425" tall
Rubber foot. 1.5" diameter x 0.425" height. 0.175" diameter mounting hole for use with #8 screws. (Sold individually, mounting hardware not included).
$1.25
P-H9700 Foot - Rubber, 1.5" diameter x 1" tall, with metal washer
Rubber foot measuring 1 ½" diameter X 1" height with metal washer.
$1.00
P-H9550 Foot - Rubber, 1.5" diameter x 1.9" tall, with metal washer
1 ½" diameter x 1 3/16" high with metal washer. Sold individually.
$1.50
P-H9500 Foot - Rubber, 1.5" x .75", with Metal Washer
1 ½" diameter x ¾" high with metal washer. Sold individually.
$2.20
P-H9300-A Foot - Rubber, 1.5" x .75", with Steel Washer
High quality large rubber feet with steel washer inserts. These feet are made of a durable textured rubber. The diameter is 1.5” and the height is .75”.
$4.40
package of 4
P-H1308 Foot - Rubber, ¼" tall with ½" diameter, countersunk
1/4" tall x 1/2" outside diameter. Interior through hole diameter is 1/8". A counter sunk hole for the screw or nail (not included) is ¼" diameter x 3/16" deep
$3.25
package of 4
P-H253 Foot - Rubber, ⅜" height x ~\frac{15}{16}~" diameter
Package of 4 rubber feet (15/16" diameter x ⅜" height) mounting hole is good for #6 screws.
$4.29
package of 4
P-H2082S Foot - Rubber, ⅝" x ½", Steel Washer Insert
5/8" diameter x ½" tall rubber foot with metal insert and 0.15" mounting hole diameter for #6 screws. (Package of 4)
$5.95
package of 4
P-H9800 Foot - Synthetic Rubber, 0.51" Height x 1.60" Diameter
Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.
$0.80
package of 4
F-Z3AG-F Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Protect your expensive investment or hobby with inexpensive fuses.
Starting at $2.25
package of 5
F-ZGMA-F Fuse - Fast-Blow, Miniature, GMA-type 5mm x 20mm
Protect your expensive investment or hobby with inexpensive fuses. • GMA Type • Measures .78"(20mm) in length, 0.19"(5mm) in diameter • Fast-Blow • Package of 5
Starting at $3.25
package of 5
F-Z3AG-S Fuse - Slow-Blow, 250V, 3AG, 0.25" x 1.25"
The 3AG Slo-Blo fuse solves a broad range of application requirements while offering reliable performance and costeffective circuit protection. Fits fuse block S-H259 and fuse holder S-H201.
$3.25
package of 5
F-ZGMD-S Fuse - Slow-Blow, 250V, Miniature, GMD-type 5mm x 20mm
Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity. Rated at 250V. Package of 5
$3.95
package of 5
S-H259 Fuse Block - for 3AB and 3AG fuses, low profile
Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
$3.10
S-H217 Fuse Block - For GMA / GMD Fuses, Low Profile
Open frame fuse block for GMA or GMD 5×20mm size fuses with a low profile design that features solder terminals made of tin plated brass. A unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance.
$4.95
S-H207 Fuse Cap - PCB Mounting, Universal, GMA
PCB Mount Fuse Cap.
  • 1.31” x 0.42”
  • Takes GMA sized fuse
$5.40
S-H205 Fuse Holder - 3AG-Type, High Quality
High quality fuse holder used with 3AG type fuse. Fits in a 1/2" diameter chassis hole. Frame and cap material: phenolic Terminal material: Nickel-plated brass Mounted by nut
$2.55
S-H219 Fuse Holder - 3AG-Type, Low Profile, Knob, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.
$5.95
S-H220 Fuse Holder - 3AG-Type, Low Profile, Slotted, Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile slotted cap and reduced overall height. It is a similar style to fuse holders used on many vintage Marshall amps. Mounting nut and rubber washer included.
$3.25
S-H218 Fuse Holder - 3AG-Type, Tweed Style, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.
$5.95
S-H210 Fuse Holder - 3AG-Type, Tweed Style, Solder Lug
Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
$4.70
S-H290 Fuse Holder - Bakelite, Soviet, GMD-type 5mm x 20mm
New-old-stock Soviet fuse holders. These panel mount holders fit 5x20mm GMA and GMD type fuses. A 0.625” mounting hole is required. Note: A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel
$5.00
S-H215 Fuse Holder - Clip, GMA-Type, PCB Mount
Through-hole PCB mounted fuse holder clips found in Peavey amps and other electronics. These small clips allow for minimal space fuse mourning directly on PCB’s. Fits GMA 5×20mm fuses. A pair is required to mount a fuse. Sold individually.
$0.39
S-H201 Fuse Holder - for Fender®, 3AG-Type
High quality Fender® Style fuse holder replacement for guitar amplifiers.
  • Fits ½" chassis hole diameter
  • Mounted by Nut
$2.75