Amplifier Parts

High quality bifurcated (slotted) turrets with a hollow post. These terminals are made of annealed brass with a 100% tin over nickel plating. These slotted turrets closely resemble those found in vintage Marshall amps.

• Triple turret with slot
• 9.12mm height when installed
• 3.18mm diameter
• For 3.0mm to 3.2mm panel thickness
• Recommended for mounting holes sized 2.68mm to 2.78mm
• Bright 100% tin finish
• Knurled underside of shoulder to prevent rotation once swaged

Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

~1" (25mm) diameter x 1" (25.4mm) high rubber foot / recessed bumper with a steel insert. The 0.217” (5.5mm) mounting hole works well with a variety of screw sizes. Screws sold separately.

Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.

Fuse Holder - High Quality Marshall Snap-In Style (Fits 5/8" to 11/16" Chassis Holes). Suitable for 1/4" fuses. UL and CSA approved. Electrical Specifications:

• Rated current: 10A
• Rated voltage: 250V AC
• Contact resistance: 2MΩ @ 250V DC or less
• Dialectric withstand: 1 minute @ 1500V AC
• Insulation resistance: 100MΩ or more @ 500V DC

Two rows of 30 U-style terminals (60 total) on a black board. The U-style terminal strips are spaced 8.3mm apart allowing for more densely populated point-to-point builds. The boards are 0.063” thick.

New-old-stock Soviet pilot lights that fit screw base bulbs. These lights have a unique bakelite frame and bakelite bezel. The lights come with a 6.3V bulb but can be used with any G-3-½ screw base bulb. The diameter of the light is 0.785” and the diameter of the mounting hole is 0.625”. Includes a bakelite mounting nut. Note: A small 0.2” notch must either be filed into the 0.625” mounting hole or filed off of the light to flush mount with a panel.

Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.

New-old-stock Soviet pilot lights that operate on 9V. These lights have a unique bakelite frame and metal bezel. The lights come with a 9V bulb but can be used with any voltage bulb that fits this type of socket. The diameter of the light is 12mm and the diameter of the mounting hole is 8.1mm. Includes a wavy washer and knurled nut. Note: There can be small differences in the appearance and tint of the lens and color of the bakelite. A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel. The small bulbs can come loose during shipping and reseating the bulb is recommended before use.

Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.

5/8" diameter x ½" tall rubber foot with metal insert and 0.15" mounting hole diameter for #6 screws. (Package of 4)

Round metal handle with 5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 10-32 x 1/2"
• 2 Internal Tooth Lockwashers

Indicator light, square. 6 Volts. Measures: 0.44" Length x 0.44" Width x 0.27" Depth

Made for Fender® and used on a variety of vintage and contemporary models. Package contains twelve Phillips head (10-32 X 1-½") nickel machine screws used for mounting an amplifier chassis. Used on '57 Twin®, Blues Deluxe™/DeVille™, Pro Junior™, Hot Rod Deluxe™/DeVille™, Blues Junior™, '59 Bassman®, '63 Fender® Tube Reverb, Bronco™, Bass Breaker™, '57 Deluxe™, Bassman® TV Series, EC Twinolux™/Tremolux™, '57 Champ®, EC Vibro-Champ™, and '57 Bandmaster™ amplifiers manufactured from 1994-Present.

Blank board 300mm x 60mm, 2mm thick Glass epoxy unclad laminate.

• Accepts 2mm turrets.

Peavey cap for fuse holder. 1 1/16" length x 3/8" diameter. Top slotted for flat head screwdriver.

Round metal handle with 2.25" mounting centers and 1" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 6-32 x 3/8"
• 2 Internal Tooth Lockwashers

18AWG SJT power cords used in many amplifiers along with other appliances and equipment. These cords feature bare ends for hard wiring to devices internally or using a connector. The attached plug is a Nema 5-15P for North American grounded outlets. These cords have a maximum voltage rating of 300V.

Genuine Marshall purple indicator light used in older models such as the Vintage Modern 2266 and 2266C.

Original Marshall™ 1960 Vintage plate

• Fits 1960AV and 1960BV cabinets
• Black on gold
• 29 x 85mm
• Adhesive backing

Not for resale. For repair or replacement only.
Note: Frame sold separately.

Turret board with pre installed turrets designed to be used to build a 5F1 layout or variants.

• 2mm board
• 5F1 Layout

PCB Mount Fuse Cap.

• 1.31” x 0.42”
• Takes GMA sized fuse

Flanged finishing washers made of nickel plated brass. Designed for accommodating the heads of countersunk screws. These washers provide additional bearing area on the material being fastened and can be used to give a neat, finished appearance. This design closely resembles the flanged finishing washers found on later blackface and silverface Fender® amplifier cabinets. The #6 size is used for back panels on combo amps and heads. The #8 is used for extension cabinet back panels. For the earlier flush style finishing washers used on these amps, see S-HXFW-1N.

Clip for square Marshall indicator lights - used to secure the indicator lights in place

Small swivel caster with a black wheel having 50mm diameter x 21mm width. Four ¼" diameter mounting holes. Mounting hardware not included.