Amplifier Parts
Indicator Light - for Marshall, Red Square, 120V
Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)
$4.85
Finishing Washer - #10, Stainless Steel, Countersunk
Package of 10
#10 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
$1.35
Label - High Voltage Warning, Large, Sticker
Package of 4
High voltage warning label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for rear panels on amplifiers and other equipment.
$1.25
Handle - Case, Fender style, 4.5" center to center
For Fender and other cases. 4 1/2" center to center.
Colors Available:
Starting at $4.85
Fuse Holder Cap - Marshall, for 900 Series
Fuse holder cap for Marshall™ 900 series amps. Measures 5/8" in length. Fits into S-H213
$3.50
Handle - Reddish-Brown Vintage, Soft Leather, Flat
Flat amp handle. Vintage style 100% soft leather. Reddish-brown. Mounts and screws not included (see P-H282A). Center to center measurement is 6-¾".
$10.65
Indicator Light Clip - Marshall, for securing lights
Clip for square Marshall indicator lights - used to secure the indicator lights in place
$5.20
Clamp - Speaker Grill Mount, Plastic
Black plastic clamp for mounting speaker grills. Sold individually, mounting hardware not included.
$0.85
Fuse Holder - 3AG-Type, Low Profile, Knob, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder features a low profile bayonet style knob and reduced overall height. The connector at the end of the holder is right angled which reduces the internal depth as well. It is a similar style to fuse holders used on many Fender® amps. Mounting nut and rubber washer included.
$5.95
Capacitor Cover - Fender®, for Twin Reverb
Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".
$16.95
Foot - Rubber, 1.5" diameter x 1.9" tall, with metal washer
1 ½" diameter x 1 3/16" high with metal washer. Sold individually.
$1.50
Handle - Marshall, Black Vintage, Black Caps, Large, Strap
Vintage strap. Large, black with black caps. Includes:
- 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
- 2 × Mounting brackets
- 2 × Black "Marshall" bracket covers
- 1 × Rubber handle with metallic insert
$10.76
Handle - Fender®, molded Dogbone style
Original Fender® handle, brown molded dogbone style. 6" center to center. Includes mounting hardware. Fender part number: 099-0946-000
Colors Available:
$11.95
Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Package of 4
Pure Vintage 2-screw mount amplifier, package of 4, screws included.- Set of four nickel-plated replacement amplifier corners for effective amplifier protection
- Includes eight mounting screws
- Introduced on Blonde, Brown, and Blackface™-era amplifiers
- Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
$8.45
Indicator Light - Plexi Style, Amber Dome, Neon, 120V
Plexi style pilot lights that operate on 120VAC. These lights match the style used on many vintage Marshall amplifiers. The lights use a neon bulb with an internal current limiting resistor so no external circuitry is required for use. The mounting diameter hole is 0.380” (9.65mm). Includes an internal tooth lock washer and hex nut.
$8.95
Dial Lamp - NE51, T-3-¼, 90/110V, .0003A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
$1.95
Handle - Marshall, Black Plastic, Recessed for Cabinet
Recessed plastic side handle for cabinets. Outer Dimensions: 6.19" x 10.63". Molded with a 1.75" Marshall logo.
$24.95
Tilt Back Leg Kit - Fender, for tilting amps
Package of 2
If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing!- BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin
- Comes with mounting hardware
Starting at $40.95
Dial Lamp - #46, T-3-¼, 6.3V, .25A, Screw Base
Package of 10
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
$3.00
Finishing Washer - #6, 18-8 Stainless Steel, Countersunk
Package of 10
#6 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.
$1.25
Indicator Light - Marshall, Purple Square, LED
Genuine Marshall purple indicator light used in older models such as the Vintage Modern 2266 and 2266C.
$5.50
Label - Danger High Voltage, Small, Sticker
Package of 4
Danger high voltage label for amplifiers and other equipment. These stickers are a great option for labeling equipment and builds as high voltage whenever necessary. The sticker is a single piece that must be cut to size using scissors or a paper cutter to make a total of four labels. This style of label is perfect for smaller areas like circuit boards, components, heatsinks and other areas inside the chassis.
$1.25
Handle - Ampeg Style, Black Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
See S-H105 for compatible screws and T-nuts.
$17.95
Handle Latch - Ampeg, Suitcase Flip Top
Replacement latch for Ampeg Flip Top. For use with P-H300-TOP.
All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.
All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.
$4.85